Bits & Sockets Sets

Drilling And Screw driving centrotec Screw drivers bit Assortment And Bit Holders
Fits perfectly into Systainer models with lid compartments. Bits are securely held in modules that can be flexi more→bly moved
Package Dimensions: 9.0 L x 21.0 H x 2.5 W (centimeters)
Item Package Weight: 0.4 kilograms

• Three high-speed HSS M2 spiral flute step drills.• Double spiral flutes for efficient swarf clearance.• Allows clog-free, precision drilling of 18 different size holes with just three bits.• Size #1 more→: ø4-12mm.• Size #2: ø4-22mm in 2mm increments.• Size #3: ø4-30mm in 2mm increments.• Supplied in flip-up metal case.Three high-speed HSS M2 spiral flute step drills. Double spiral flutes for efficient swarf clearance. Allows clog-free, precision drilling of 18 different size holes with just three bits. Supplied in flip-up metal case.• Three high-speed HSS M2 spiral flute step drills. • Double spiral flutes for efficient swarf clearance. • Allows clog-free, precision drilling of 18 diffe…

• Superior quality SDS MAX drill bit suitable for a variety of applications.• Drills are fully hardened and ground.Superior quality SDS MAX drill bit suitable for a variety of applications. Drills are more→fully hardened and ground.Technical Specification:Size: ø40 x 920mmWeight: 4.44KgWarranty: Consumable

Lasts up to 3x longer than a standard drill bitDrilling through reinforced concrete is a tough job and it has traditionally taken its toll on hammer drill bits. Even 4-cutters wear out fast, resulting more→in downtime changing accessories and fetching supplies. The Full Carbide Head on the Expert SDS max-8x is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact.Thanks to Bosch Carbide Technology and the Full Carbide Head, the Expert SDS max-8x lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel.For construction professionals dr…

Creates a corner bead with a step. By making a second pass at 90 degrees a full corner bead can be cut. Two flutes give a clean finish to cut edges. Specifications: • Shank Diameter: 1/2 &bull more→; Dia Metric: 28 • Dia2 Metric: 25.7 • Cut Length Metric: 17 • Overall Length Metric: 66.5 • Bearing Dia Metric: 16 • Bearing Dia Imperial: 5/8 • Radius 1 Metric: 4.8

Bead Cutters are ideally suited to form straight or curved decorative edge mouldings on table tops, chair legs and frames. They can also be used to produce complete round over profiles for window boar more→ds and stair tread nosings. Cutters can be combined to form compounded one-off mouldings for individual applications. Tooling T.C.T. 1/4in Shank. R = 4.8 mm D = 28 mm d = 25.7 mm B = 16 mm

The two bearings supplied offer the means of cutting different depths of mouldings. Specifications: • Shank Diameter: 1/2 • Dia Metric: 34.9 • Cut Length Metric: 16 • Overall Leng more→th Metric: 64 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 12.7

The two bearings supplied offer the means of cutting different depths of mouldings. Specifications: • Shank Diameter: 1/4 • Dia Metric: 34.9 • Cut Length Metric: 16 • Overall Leng more→th Metric: 55 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 12.7

3 degree undercut router bit with shank mounted bearing guide for routing a leading edge on doors to allow a tight fit against jamb. Specifications: • Shank Diameter: 1/2 • Dia Metric: 24.2 more→• Cut Length Metric: 50 • Overall Length Metric: 100 • Bearing Dia Metric: 19.1 • Angle: 93

Two Flute Cutter for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have more→TCT plunge centre tips.

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Dia more→meter: 1/2 • Dia Metric: 19.1 • Dia Imperial: 3/4 • Cut Length Metric: 63 • Overall Length Metric: 105

These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut. Specifications: • Dia Metric: 50 • Sawbore: M12 • Saw Kerf Me more→tric: 5 • Saw Teeth: 4

These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut. Specifications: • Dia Metric: 50 • Sawbore: M12 • Saw Kerf Me more→tric: 6 • Saw Teeth: 4

Easy wipe clean material and comfortable feel
Drive: Hexagon, Solid 6.3mm (1/4") Output: Slot Profile (Negative), Cross-Recessed Profile (Plus) PH, Posi-Drive Profile PZ, Inner Hex Profile, Inn more→er TORX Profile, Tamper Proof TORX Profile. Wrench Size: ♍ 1,5-6 Ý 0,5 x 4-1,2 x 6,5 Ý PH1-PH3 PZ1 - PZ3 T6-T40 Dimensions/Length: 130mm x 118mm x 50mm
[Set Contents] 1 x HAZET Smart Case Bit Set 2200SC-1|69 Pieces, Manual Operation, Drill and Cordless Driver Adapter, Various Bits in Compact Case | Length: 5.1 x 4.6 x 2.0 inches (130 x 118 x 50 mm)

Dormer 5-piece set HM Bevel milling, ST toothing Specifications: P703 9.6 x 6.0 • Rotary Burr - Cylinder with Endcut • 6mm round shank • Diameter: 9.6mm P705 9.6 x 6.0; • Ball Nose more→d Cylinder Cut • 6mm round shank • Diameter: 9.6mm P707 9.6 x 6.0; • Rotary Burr - Ball Cut • 6mm round shank • Diameter: 9.6mm P711 9.6 x 6.0 • Ball Nosed Tree Cut • 6mm round shank • Diameter: 9.6mm P721 10.0 x 6.0 • Ball Nosed Cone Cut • 6mm round shank • Diameter: 10mmFeatures & Benefits• ST geometry specifically designed to maximise metal removal rate when machining steel • Special brazing elements provide excellent braze strength,…

The Facom 1/2" Drive Non-Sparking Bi Hexagon Socket Metric is designed for maximum safety and performance in hazardous environments. Ideal for use in industries such as oil and gas, chemical processin more→g, and mining, this socket is crafted from high-quality copper beryllium alloy, ensuring it is non-sparking and safe for use in explosive atmospheres. With its bi-hexagon (12-point) design, this metric socket provides a secure grip on fasteners, reducing the risk of rounding and ensuring efficient torque transfer. The 1/2" drive size is compatible with a wide range of ratchets and torque wrenches, offering versatility and ease of use in various applications. The corrosion-resistant finish enhances …