Bits & Sockets Sets

Use for producing mortar grooves and for bevelling applications. Specifications: • Shank Diameter: 1/2 • Dia Metric: 38 • Cut Length Metric: 27 • Overall Length Metric: 62.5 • Angle: 60

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Diameter: 1/2 • Dia Metric: 27 • Dia Imperial: 1 1/16 • Cut Length Metric: 32 • Overall Length Metric: 72

These slotters have a 12mm clear bore to enable them to be mounted at any position on the arbor in combination with spacers, with or without a bearing. Specifications: • Dia Metric: 50 • Sawbore: 12 • Saw Kerf Metric: 4 • Saw Teeth: 4

Ideal for producing nosings and attractive edge moulds. Specifications: • Shank Diameter: 1/4 • Dia Metric: 25 • Cut Length Metric: 12 • Overall Length Metric: 57.5 • Radius 1 Metric: 6

Gives a narrow appearance to a board edge. Specifications: • Shank Diameter: 1/4 • Dia Metric: 22 • Cut Length Metric: 10 • Overall Length Metric: 39 • Radius 1 Metric: 3

T-handle screwdriver: The ideal handle shape to allow high torque transmission in difficult tightening and loosening situations. The ergonomic shape of the handle fills the palm of the hand well, the fingers lie safely in the soft rounded handle recesses. The whole hand makes contact with the handle and friction losses between the hand and the handle are avoided. Special surface treatment of the blades for high corrosion protection and an optimum fit in the screw head.Features and Benefits:• T-handle screwdriver for the transmission of particularly high tightening and loosening torque• Ergonomic 2-component handle with finger handle recesses and pleasant surface feel for very high …

Professional Quality, manufactured from chrome vanadium steel hardened, tempered and chrome plated for corrosion protection. Chamfered end allows positive nut location and entry. Hole for driving accessory with locking pin. Manufactured to DIN 3124/ISO 2725 and DIN 3120/ISO 1174 Specifications Contents: 1 x Elora Bi-Hexagon Socket, 1" Sq. Dr., 50mm

A basic no-nonsense 12 piece 1/2" drive set of sockets with an FRP ratchet and an extension bar. The set is supplied in a clip box which stores the sockets and includes a clip rail facility for adding extra sockets. Contents: FRP Ratchet & 5" Extension Bar. Sockets: 8, 10, 12, 13, 14, 15, 17, 18, 19 & 24mm

The BOSCH PROFESSIONAL Expert SDS Max-8x 28x400x520 mm Wall Hammer Drill Bit is a high-quality drill bit designed for professional use. It is specifically designed for use with electric tools and can be used with various drilling machines. This drill bit is made from premium quality materials to ensure durability and efficiency. It features an SDS Max shank, which provides a secure grip and prevents slippage during drilling. The 28mm diameter allows for precise and accurate drilling, while the 400mm length offers extended reach.The BOSCH PROFESSIONAL Expert SDS Max-8x Wall Hammer Drill Bit is ideal for drilling through various materials, including concrete, bricks, and masonry. It is specifically …

5x Wood tips 3-8mm
5x 4-8mm Masonry tips
0x HSS-TiN metal tips 1.5-4.5mm in 0.5mm increments, 4.5, & 6mm
7x sockets 4-11mm
37x Inserts 25mm
10x 50mm inserts
1x Magnetic adapter for 25mm inserts
1x Countersink

NK.A 3/4" drive impact extensions. For your safety, use impact extensions and accessories with the appropriate rings and pins. Specifications • Drive: 3/4" • Size: 252mm

Trend Letter Templates - 4 Piece Set The ideal routing accessory for making consistent, high quality name plates using a cutter and guide bush. Working conjunction with a 13mm guide bush and cutter the template is fast and easy to use to make impressive, bold and easy to read signs. Clear acrylic design allows easy and fast setup, and full line of sight when routing. Routed letters are uppercase, 57mm high for easy visibility and ideal for many applications including house signs, directional signs and more. Compatible with the Trend TEMP/LN57X1/4 set for flat bottomed 8mm wide letters.

Two Flute Rounding Over Bits To form corner radius to shelves, table tops, etc. With ball bearing guide for curved work.

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Specifications: • Shank Diameter: 1/2 • Dia Metric: 44.5 • Dia Imperial: 1 3/4 • Cut Length Metric: 25 • Cut Length Imperial: 1 • Overall Length Metric: 63

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Specifications: • Shank Diameter: 1/2 • Dia Metric: 47.6 • Dia Imperial: 1 7/8 • Cut Length Metric: 25 • Cut Length Imperial: 1 • Overall Length Metric: 63

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Diameter: 1/2 • Dia Metric: 14 • Dia Imperial: 35/64 • Cut Length Metric: 50 • Overall Length Metric: 95