Bits & Sockets Sets

The Wiha FlipSelector TORX® Bit Set 13 Piece comes with a selection of high quality bits. Suitable for all types of fastening in trade and industry. Bits conform to DIN 3126, ISO 1173, Style C6,3. more→The FlipSelector case has a tried and tested design. Made from impact resistant, glass-fibre reinforced polyamide. Always ready to use, easily fits into trouser pockets. The case also features a handy belt clip. This 13 Piece Set contains the following: 12 x 25mm Standard TORX® Bits: T7, T8, T9, T10, T15, T20, T25, T30 & T40. 1 x Magnetic Bit Holder 58mm.

The Wiha FlipSelector Bit Set 13 Piece comes with a selection of high quality bits. Suitable for all types of fastening in trade and industry. The bits conform to DIN 3126, ISO 1173, Style C6,3.The Fl more→ipSelector case has a tried and tested design. Made from impact resistant, glass-fibre reinforced polyamide. Always ready to use, easily fits into trouser pockets.The case also features a handy belt clip. This 13 Piece Set contains the following: 1 x 25mm Standard Slotted Bit 5.5mm. 5 x 25mm Standard Phillips Bits: PH1, PH2(x3) & PH3. 6 x 25mm Standard Pozidriv Bits: PZ1, PZ2(x4) & PZ3. 1 x Magnetic Bit Holder 58mm.

The Wiha FlipSelector Bit Set 13 Piece comes with a selection of high quality bits. Suitable for all types of fastening in trade and industry. Bits conform to DIN 3126, ISO 1173, Style C6,3. The FlipS more→elector case has a tried and tested design. Made from impact resistant, glass-fibre reinforced polyamide. Always ready to use, easily fits into trouser pockets. The case also features a handy belt clip. This 13 Piece Set contains the following: 1 x 25mm Standard Slotted Bit 5.5mm. 1 x 25mm Standard Phillips Bit PH2. 3 x 25mm Standard Pozidriv Bits: PZ1, PZ2 & PZ3. 4 x 25mm Standard TORX® Bits: T15, T20, T25 & T30. 3 x 25mm Standard Hexagon Bits: 3.0, 4.0 & 5.0mm. 1 x Magnetic Bit Holder 58mm.…

The Wiha FlipSelector Bit Set 13 Piece comes with a selection of high quality bits. Suitable for all types of fastening in trade and industry. The bits conform to DIN 3126, ISO 1173, Style C6,3. The F more→lipSelector case has a tried and tested design. Made from impact resistant, glass-fibre reinforced polyamide. Always ready to use, easily fits into trouser pockets. The case also features a handy belt clip. This 13 Piece Set contains the following: 2 x 25mm Standard Phillips Bits: PH2(x2). 4 x 25mm Standard Pozidriv Bits: PZ1, PZ2(x2) & PZ3. 6 x 25mm Standard TORX® Bits: T10, T15, T20, T25, T30 & T40. 1 x Magnetic Bit Holder 58mm.

The Wiha BitBuddy® TY Bit Set 8 Piece allows you to position bits directly in the machine and return them to the holder easily. The pioneering arrangement of bits in the holder and the lasered pro more→file size on the bit base ensure it is extremely simple to select the right size when removing the bit from the holder.Universal in its use, the multitalented TY bit is suitable for all types of screws (T-shaped and Y-shaped). The ideal tool for fastenings in all kinds of materials. Thanks to its patented torsion zone, the bit is also suitable for power tools and impact screwdrivers guaranteeing a 120x greater lifespan compared to Wiha standard bits. The coloured bits are also quick and easy to …

The Wiha BitBuddy® TY Bit Set 7 Piece allows you to position bits directly in the machine and return them to the holder easily. The pioneering arrangement of bits in the holder and the lasered pro more→file size on the bit base ensure it is extremely simple to select the right size when removing the bit from the holder.Universal in its use, the multitalented TY bit is suitable for all types of screws (T-shaped and Y-shaped). The ideal tool for fastenings in all kinds of materials. Thanks to its patented torsion zone, the bit is also suitable for power tools and impact screwdrivers guaranteeing a 120x greater lifespan compared to Wiha standard bits. The coloured bits are also quick and easy to …

The Wiha BitBuddy® TY Bit Set 7 Piece allows you to position bits directly in the machine and return them to the holder easily. The pioneering arrangement of bits in the holder, and the lasered pr more→ofile size on the bit base, ensure it is extremely simple to select the right size when removing the bit from the holder.Universal in its use, the multitalented TY bit is suitable for all types of screws (T-shaped and Y-shaped). The ideal tool for fastenings in all kinds of materials. Thanks to its patented torsion zone, the bit is also suitable for power tools and impact screwdrivers, guaranteeing a 120x greater lifespan compared to Wiha standard bits. The coloured bits are also quick and easy …

The Wiha BitBuddy® TY Bit Set 7 Piece allows you to position bits directly in the machine and return them to the holder easily. The pioneering arrangement of bits in the holder, and the lasered pr more→ofile size on the bit base, ensure it is extremely simple to select the right size when removing the bit from the holder.Universal in its use, the multitalented TY bit is suitable for all types of screws (T-shaped and Y-shaped). The ideal tool for fastenings in all kinds of materials. Thanks to its patented torsion zone, the bit is also suitable for power tools and impact screwdrivers and guarantees a 120x greater lifespan compared to Wiha standard bits. The coloured bits are also quick and easy …

Professional Quality, sockets manufactured from chrome vanadium steel hardened, tempered and chrome plated for corrosion protection. Chamfered end allows positive nut location and entry. Hole for driv more→ing accessory spring - loaded ball. Sold loose.

Professional Quality, sockets manufactured from chrome vanadium steel hardened, tempered and chrome plated for corrosion protection. Chamfered end allows positive nut location and entry. Hole for driv more→ing accessory spring - loaded ball. Sold loose.

Wera 8767 C TORX HF Zyklop Sockets with a holding function that securely holds TORX fasteners. Assembly or disassembly becomes easy where fasteners are recessed, in awkward spaces or where overhead wo more→rk is necessary. Sockets are guaranteed for production use with non-impact power tools. Made from matt, chrome-plated, chrome vanadium steel. Utilises the 'Take it Easy' tool finder, for fast and easy selection of the required size, thanks to the instantly recognisable colour coded system. 1 x Wera 8767 C HF Zyklop TORX HF Screw Hold Socket 1/2in Drive TX60 x 140mm

High quality bits out of stainless steel for Pozidriv screws. Wera stainless are made out of stainless steel which prevents the formation of unsightly extraneous rust. Come with Torsion zone: Torsion more→bits take-up torque peaks and absorb them in the Torsion zone. This prevents premature wear and extends the service life of the bit. ¼" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. Features and Benefits: • Suitable for Pozidriv screws • Stainless Steel Bits • Solution to the extraneous rust problem: fasten stainless screws with stainless tools • Vacuum ice-hardened • Torsion design against premature wear Contents: 1x 3855/1 TS SB bits, stainless, PZ 1 x 25 m…

High quality bits out of stainless steel for hexagon socket screws. Wera stainless are made out of stainless steel which prevents the formation of unsightly extraneous rust. The Hex-Plus profile offer more→s a greater contact surface in the head of the screw. The notching effect is therefore reduced to a minimum and damage to the screw head more or less eliminated. Come with Torsion zone: Torsion bits take-up torque peaks and absorb them in the Torsion zone. This prevents premature wear and extends the service life of the bit. ¼" hexagon, suitable for holders as per DIN ISO 1173-D 6.3. Features and Benefits: • For socket head screws • Stainless Steel Bits • Solution to the extraneous r…

High quality bits with Torsion zone – where kinetic energy is diverted from peak loads. This greatly extends the product service life. Tough viscous, for universal use. 1/4" hexagon, suitable for hold more→ers as per DIN ISO 1173-F 6.3.Features & Benefits:• For Phillips screws• Ductile and tough for hard materials• Torsion design against premature wear• 1/4" hexagon drive (Wera connecting series 4)• Suitable for AEG, ARO, Atlas-Copco, Biax, Black & Decker, Bosch, Buckeye Tools etc.Contents:851/4 TZ bits, PH 3 x 50 mm

High quality bits with Torsion zone – where kinetic energy is diverted from peak loads. This greatly extends the product service life. Tough viscous, for universal use. 1/4" hexagon, suitable for hold more→ers as per DIN ISO 1173-F 6.3.Features & Benefits:• For Phillips screws• Ductile and tough for hard materials• Torsion design against premature wear• 1/4" hexagon drive (Wera connecting series 4)• Suitable for AEG, ARO, Atlas-Copco, Biax, Black & Decker, Bosch, Buckeye Tools etc.Contents:851/4 TZ bits, PH 2 x 50 mm

High quality bits with Torsion zone – where kinetic energy is diverted from peak loads. This greatly extends the product service life. Tough viscous, for universal use. 1/4" hexagon, suitable for hold more→ers as per DIN ISO 1173-F 6.3.Features & Benefits:• For Phillips screws• Ductile and tough for hard materials• Torsion design against premature wear• 1/4" hexagon drive (Wera connecting series 4)• Suitable for AEG, ARO, Atlas-Copco, Biax, Black & Decker, Bosch, Buckeye Tools etc.Contents:851/4 TZ bits, PH 1 x 50 mm

Premium bits for Phillips screws. Torque peaks are cushioned by the torsion shape. Premature wear is avoided and the service life of the bit is increased. Tough, for universal use. 1/4" hexagonal, sui more→table for holders as per DIN ISO 1173-D 6.3. Features and Benefits: • For Phillips screws • Torsion zone for absorption of peak loads • Enhanced service life of the bits • Ductile and tough for hard materials • 1/4" hexagon drive (Wera connecting series 1) Contents: 1x 851/1 TZ SB bits, 3 pieces; 3x 851/1 TZ bits: PH 1x25, PH 2x25, PH 3x25

Torsion Extra Hard Pozidriv bits. TH Torsion Extra Hard bits are a hard-wearing, great value bit, with longer service life. Ideal for driving into timber and general construction materials. 1/4in Hexa more→gon drive, 25mm bits. 1/4in Hexagon drivePozidriv 3 point x 25mm

Premium bits with torsion zone into which kinetic energy is dissipated during peak loads. This significantly increases the product life. Extra-hard. 1/4" hexagonal, suitable for holders as per DIN ISO more→1173-D 6.3.Features and Benefits:• Suitable for Pozidriv screws• Torsion zone for absorption of peak loads• Enhanced service life of the bits• Particularly hard for semi-hard materials• 1/4" hexagon drive (Wera connecting series 1)Contents:855/1 TH bits, PZ 2 x 25 mm

High quality bits with Torsion zone – where kinetic energy is diverted from peak loads. This greatly extends the product service life. Extra-hard; 1/4" hexagon, suitable for holders as per DIN ISO 117 more→3-F 6.3.Features & Benefits:• For Phillips screws• Particularly hard for semi-hard materials• Torsion design against premature wear• 1/4" hexagon drive (Wera connecting series 4)• Suitable for AEG, ARO, Atlas-Copco, Biax, Black & Decker, Bosch, Buckeye Tools etc.Contents:851/4 TH bits, PH 3 x 50 mm

Wera TH Torsion Extra Hard bits are a hard-wearing, great value bit, with longer service life. Ideal for driving into timber and general construction materials. Use with Wera BiTorsion Rapidaptor for more→extended service use.

High quality bits with Torsion zone – where kinetic energy is diverted from peak loads. This greatly extends the product service life. Extra-hard; 1/4" hexagon, suitable for holders as per DIN ISO 117 more→3-F 6.3.Features & Benefits:• For Phillips screws• Particularly hard for semi-hard materials• Torsion design against premature wear• 1/4" hexagon drive (Wera connecting series 4)• Suitable for AEG, ARO, Atlas-Copco, Biax, Black & Decker, Bosch, Buckeye Tools etc.Contents:851/4 TH bits, PH 1 x 50 mm

61 piece set with a universal bit holder Rapidaptor 889/4/1 K with quick-release chuck suitable for power tools and electronic drills, and torsion bits 1 x 889/4/1 K Rapidaptor universal bit holder. 1 more→5 x Phillips 25mm bits PH1 (x3), PH2 (x10), PH3 (x2). 15 x Pozi 25mm bits PZ1 (x3), PZ2 (x10), PZ3 (x2). 16 x TORX 25mm bits TX10 (x2), TX15 (x3), TX20 (x3), TX25 (x3), TX30 (x3), TX40 (x2). 3 x Slotted 25mm bits 0.6x4.5mm, 1.0x5.5mm, 1.2x6.5mm. 11 x Hex 25mm bits 2.5mm (x3), 3.0mm (x3), 4.0mm (x3), 5.0mm (x2). Supplied in a hard wearing, handy compact rugged pouch with hook & loop closure

The Wera BTH BiTorsion Pozi Extra Hard Bits for use with all combi and drill drivers, for impact tools use Impaktor bits. Significantly extend service life, ideal for use with screws into general cons more→truction materials and timbers. Use with Wera BiTorsion Rapidaptor bit holder for ultimate service life.