Bits & Sockets Sets

For accurate guiding of router, saws and jigsaws. Integral clamping jaws and a locking lever provide a quick way of clamping the guide batten. Ideal for holding and clamping work pieces. Aluminium more→extrusion incorporating T-slots. The clamps are fitted with a metric/imperial scale for setting lengths and stop positions. Scale can be positioned by removing 20mm of the self adhesive backing. Three lengths of clamp available 24 inch, 36 inch and 50 inch. Router not included. Patent No. US7,007,731. Specifications: • Cut Length Metric: 610 • Cut Length Imperial: 24 • Type or Grade: Max clamp 610 mm

The Trend UNIBASE is a Router Base Adaptor that allows other makes and models of routers to use the Trend Guide Bushes for increased diversity. The Unibase enables routers with non-standard guide bush more→fittings to accept the range of Trend guide bushes. It will fit directly to most routers. Features:
- Line-up pin used with a 16mm plastic bush to ensure concentricity of the cutter to the guide bush when fitting the sub-base
- Suits collet sizes 1/4 inch, 8mm, 12mm and 1/2 inch Instructions for fitting:
- The line-up pin fits into the collet and is plunged through the router base 
- The line-up bush is fitted into the Unibase and secured
- This is then placed over the line-up pin a…

This 30mm guide bush is a popular router accessory that fixes to the router base and acts as a small ring fence The Trend GB30 is a 30mm guide bush designed to guide the router when using a template. more→It fits directly to the Trend T3, T4, T5, T5 MK2, T9, T10 and T11 and some other light duty routers. Features:
- This guide bush guides the router when using a template
- Fits directly to Trend T3, T4, T5, T5 MK2, T9, T10 and T11, and some other light duty routers
- Will fit other makes when used with GB/5, GB/PLATE or UNIBASE Sub-base Specification:
- Diameter: 30mm

Guide bush guides the router when using a template. Fits directly to Trend T3,T4,T5,T5 MK2, T9,T10 and T11, and some other light duty routers. Will fit other makes when used with GB/5, GB/PLATE or more→UNIBASE Sub-base. Specifications: • Dia Metric: 25.4 • Dia Imperial: 1 • Dia2 Metric: 22.4 • Cut Length Metric: 6Features & Benefits• Fits directly to Trend T3,T4,T5,T5 MK2, T9,T10 and T11, and some other light duty routers • Will fit other makes when used with GB/5, GB/PLATE or UNIBASE Sub-base.

Guide bush guides the router when using a template. Fits directly to Trend T3,T4,T5,T5 MK2, T9,T10 and T11, and some other light duty routers. Will fit other makes when used with GB/5, GB/PLATE or more→UNIBASE Sub-base. Specifications: • Dia Metric: 20 • Dia2 Metric: 17 • Cut Length Metric: 6Features & Benefits• Fits directly to Trend T3,T4,T5,T5 MK2, T9,T10 and T11, and some other light duty routers • Will fit other makes when used with GB/5, GB/PLATE or UNIBASE Sub-base.

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Ideal for cutting kitchen workto more→ps. TC tips are ground with greater clearance for routing of resinous material. Specifications: • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 50 • Overall Length Metric: 99 • Type or Grade: Clearance ground

Two flute straight plunging bits General-purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods. For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the more→most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks. Specifications: • Shank Diameter: 1/2 • Dia Metric: 12 • Dia Imperial: 15/32 • Cut Length Metric: 63 • Overall Length Metric: 100

Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods. For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the more→most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks. Specifications: • Shank Diameter: 1/4 • Dia Metric: 15.9 • Dia Imperial: 5/8 • Cut Length Metric: 19 • Overall Length Metric: 60

Trend two flute hinge jig cutters with extra long shanks for deep grooving, rebating and morticing which are useful for template work when thickness of template restricts depth. Extra care must be tak more→en to avoid breakage. Take more passes than usual and only cut up to half the diameter of the cutter in one pass. C = 19 mm D = 6.3 mm 1/4 in

A two flute cutters with extra long shanks. Deep grooving, rebating and mortising. Useful for template work when thickness of template restricts depth. Extra care must be taken to avoid breakage more→. Specifications: • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 22 • Overall Length Metric: 95 • Type or Grade: Two flute

Trend two flute hinge jig cutters with extra long shanks for deep grooving, rebating and morticing which are useful for template work when thickness of template restricts depth. Extra care must be tak more→en to avoid breakage. Take more passes than usual and only cut up to half the diameter of the cutter in one pass. C = 12 mm D = 19 mm 15/32 in OL = 66mm

Two flute TC cutter giving good chip clearance. Ideal for shallow lateral routing cuts such as recessing hinges. Corners will require final trimming square with a hand chisel or a corner chisel. S more→pecifications: • Shank Diameter: 1/4 • Dia Metric: 19.1 • Dia Imperial: 3/4 • Cut Length Metric: 19 • Overall Length Metric: 51

Two flute TC cutter giving good chip clearance. Ideal for shallow lateral routing cuts such as recessing hinges. Corners will require final trimming square with a hand chisel or a corner chisel. Diame more→ter 12.7mm. Cutting length 19mm. Shank 1/4in.

Straight two flute for drilling and slotting, cutting aluminium anodised duralium and uPVC plastic. Cutters are designed to plunge and machine or mill lateral slots. All aluminium tooling should b more→e used with a coolant, wax stick or lubricant. Ideal for recessing and slotting extrusions. HSSE is a special grade for machining the most abrasive anodised finishes. For grooving and profiling of aluminium and plastics. Specifications: • Shank Diameter: 1/4 • Dia Metric: 6.3 • Dia Imperial: 1/4 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 65

Trend Trade Cutter for Worktop Joints - 1/2in diameter 50mm cut length 1/2in diameter cutter for kitchen worktop jointing, cutting the joints and bolt recesses. High quality micro-granular tungsten more→carbide cutting edges for maximum performance and durability on laminate and solid timber worktops for professional results every time. PTFE coating on the bodies minimises heat and resin build up for increased performance and longevity. Etched K mark shank for safe insertion into the router collet. Ideal for standard 40mm deep worktops. Supplied in a storage tube for maximum protection when transporting from job to job. Specifications: • Shank Diameter: 1/2 • Dia Metric: 12.7 • …

Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods. For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the more→most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks. Specifications: • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 50 • Overall Length Metric: 93 • Type or Grade: Centre tip

V point through hole slow spiral TCT drills can be used in drilling machines or portable routers. Tungsten Carbide Tipped for long life. Router drilling ensures hole is perpendicular to surface. Sp more→ecifications: • Shank Diameter: 1/4 • Dia Metric: 5 • Cut Length Metric: 39 • Overall Length Metric: 69

Slotters with M12x1.0 threaded bore enables flush recessing in the corner such as for weather proofing. Spacers are supplied to ensure the minimal threaded arbor protrudes below the slotter. Arbor 3 more→3/20 enables 12mm bore guide bearings to be fitted above slotter for self-guiding work. Specifications: • Shank Diameter: 1/2 • Dia Metric: 18.5 • Overall Length Metric: 50 Contents: 1 x Arbor 1 x Spacer 2mm

Ideal for use in CNC machines and for fixed head routing applications, can also be used in portable routers. Feed rates range from 5- 10m/min of 18000 - 24000 RPM. Ideal for hardwoods and abrasive m more→aterial. Fine finish. Up-cut prevents burning in plunge cuts. High feed speed. Two flute. Specifications: • Shank Diameter: 1/4 • Dia Metric: 3.2 • Dia Imperial: 1/8 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 50.8 • Overall Length Imperial: 2 • Type or Grade: Up-cut

Down-cut spirals are ideal for routing small workpieces or for holding workpieces secure in vacuum jigs. Down-cut pushes woodchips below the work. Two flute. Specifications: • Shank Diameter: more→1/4 • Dia Metric: 4.76 • Dia Imperial: 3/16 • Cut Length Metric: 19.1 • Cut Length Imperial: 2/4 • Overall Length Metric: 63.5 • Overall Length Imperial: 2 1/2 • Type or Grade: Down-cut

Used to slot and trim low melting point plastics such as ABS, Styrene and PVC. For maximum life these cutters are Solid Carbide. Two flute for fine finish. Specifications: • Shank Diameter: more→1/4 • Dia Metric: 6.3 • Dia Imperial: 1/4 • Cut Length Metric: 25 • Cut Length Imperial: 63/64 • Overall Length Metric: 65