Bits & Sockets Sets

Trend Snappy Robertson Driver Bits - 3x No 2 Size Set of three 50mm long driver bits with Square Drive (Robertson) profiles. Handy addition to the toolkit for work with screws favoured by the US mar more→ket and becoming increasingly popular cross the globe. For use with Robertson screws; the ideal fixing for maximum driving performance without cam out issues. 1/4in hex shank for a direct fit for impact drivers or all Trend Snappy chucks ensuring fast swapping between accessories. Bit size of1/8in (3.2 mm) covers the most popular screw sizes. Specifications: • Shank Diameter: 1/4 hex • Dia Metric: 3.2 • Dia Imperial: 1/8 • Overall Length Metric: 50 • Type or Grade: R2 …

Square Robertson screwdriver bits. Specifications: • Shank Diameter: 1/4 hex • Dia Metric: 2.38 • Dia Imperial: 3/32 • Overall Length Metric: 50 • Type or Grade: R1 • Pa more→ck Qty: 3 pack Contents: 3 x Robertson No 1 Screwdriver bits

A pack of 25mm slotted bits. High grade chrome-vaadium steel, through hardened. For all types of screw applications in trade and industry. Specifications: • Shank Diameter: 1/4 hex • Over more→all Length Metric: 25 • Type or Grade: Slot • Pack Qty: 3 packFeatures & Benefits• High grade chrome-vanadium steel • Through hardened • For all types of screw applications in trade and industryContents• 3 Bits

No 2 Robertson square drive bits. Specifications: • Shank Diameter: 1/4 hex • Dia Metric: 3.2 • Dia Imperial: 1/8 • Overall Length Metric: 75 • Type or Grade: R2 • Pack more→Qty: 1 pack

Trend Snappy Robertson No2 Driver Bit - 150mm long 150mm long bit ideal for use with Trend Pocket Hole screws and Pocket hole Jigs Allows screws to be driven in easily at the correct angle when asse more→mbling pockethole joinery without the drill chuck catching the workpieces. For use with Robertson screws; the ideal fixing for maximum driving performance without cam out issues. 1/4in hex shank for a direct fit for impact drivers or all Trend Snappy chucks ensuring fast swapping between accessories. Bit size of1/8in (3.2 mm) covers the most popular screw sizes. Specifications: • Shank Diameter: 1/4 hex • Dia Metric: 3.2 • Dia Imperial: 1/8 • Overall Length Metric: 150 • …

Trend Snappy Robertson Driver Bits - No1, 2 and 3 sizes Set of three driver bits with Square Drive (Robertson) profiles. Covers all three head sizes of Robertson fixings: No1, 2 and 3. For use with more→Robertson screws; the ideal fixing for maximum driving performance without cam out issues. 50mm long bits with 1/4in hex shank for a direct fit for impact drivers or all Trend Snappy chucks ensuring fast swapping between accessories. Bit sizes of (2.38 mm), 1/8in (3.2 mm) & 9/64in (3.6 mm) covering all popular screw sizes. Specifications: • Shank Diameter: 1/4 hex • Dia Imperial: 3/32-9/64 • Overall Length Metric: 50 • Type or Grade: R1,2,3 • Pack Qty: 3 pack Contents: …

Trend SNAP/SB5/SET Bit Set Colour Ring Torsion Zone 15 Piece The SNAP/SB5/SET is an assorted screwdriver bit set for a wide range of applications. With colour rings on the bit shanks to denote type f more→or ease of identification. The set contains fourteen 25mm insert bits which feature a torsion zone to minimise the possibility of breakage. Made of high grade hardened tool steel. Includes a magnetic bit holder. Supplied in flip lid storage case with belt clip. Contains: 1 x Magnetic bit holder 14pcs 25mm insert bits: 2 x Phillips (No.1 & 2) - Red ring 2 x Pozi (No.1 & 2) - Blue ring 2 x Slotted (4mm x 0.6mm & 6mm x 0.9mm) - Red/Orange ring 3 x Hex (3mm, 4mm & 5mm A/F) - Yellow/Orange ring 5 …

Profilers with shank mounted bearings for guidance, for use with router mounted above or below a table when following a template. Bearing guided cutters are suitable for both straight and curved work. more→For profiling and rebating applications only. NOT for plunge, cutting or grooving. A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing.

Router Pod universal router safety stand. For use with jigs and templates when a guide bush is fitted to the router base. Prevents laying of router on side or head. Ideal for use when cutter depth more→is set with a fine height adjuster. U-shape design to allow easier router fitting. Rubber feet for anti slip. Stack double for extra long cutters. Prevents cutter damage to workbench. Made from ABS plastic. Contents: 1 x Router Pod

Lip and Spur - Short series. These slow spiral TCT drills can be used in drilling machines or portable routers. Suitable for use in the DeWalt DE6252 Dovetail Jig. For drilling machines or routers. more→Specifications: • Shank Diameter: 1/4 • Dia Metric: 8 • Cut Length Metric: 35 • Overall Length Metric: 70

Lip and Spur - Short series. These slow spiral TCT drills can be used in drilling machines or portable routers. Suitable for use in the DeWalt DE6252 Dovetail Jig. For drilling machines or routers. S more→pecifications: • Shank Diameter: 1/4 • Dia Metric: 10 • Overall Length Metric: 70

Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing fa more→ilure. Scrape off any resin build-up. Always check the tightness of the fixing screw before using cutter. Specifications: • Cut Length Metric: 6 • Bearing Dia Metric: 18 • Sawbore: 8

Bearing for slotting systems. Ball bearings should be wiped clean, not dipped in solvent. Prevent resin build-up by cleaning with wire brush. Specifications: • Cut Length Metric: 9.3 • B more→earing Dia Metric: 32.9 • Sawbore: 12.7 • Sawbore Imperial: 1/2

Bearing for slotting systems. Ball bearings should be wiped clean, not dipped in solvent. Prevent resin build-up by cleaning with wire brush. Specifications: • Cut Length Metric: 9.3 • B more→earing Dia Metric: 33.9 • Sawbore: 12.7 • Sawbore Imperial: 1/2

Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing fa more→ilure. Scrape off any resin build-up. Always check the tightness of the fixing screw before using cutter. Specifications: • Cut Length Metric: 5 • Bearing Dia Metric: 16 • Sawbore: 8

Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing fa more→ilure. Scrape off any resin build-up. Always check the tightness of the fixing screw before using cutter. Specifications: • Cut Length Metric: 10.6 • Bearing Dia Metric: 41 • Sawbore: 8

Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing fa more→ilure. Scrape off any resin build-up. Always check the tightness of the fixing screw before using cutter. Specifications: • Cut Length Metric: 6 • Bearing Dia Metric: 19 • Sawbore: 8

Bearing for slotting systems. Ball bearings should be wiped clean, not dipped in solvent. Prevent resin build-up by cleaning with wire brush. Specifications: • Cut Length Metric: 10 • Be more→aring Dia Metric: 42 • Sawbore: 12

Bearing for slotting systems. Ball bearings should be wiped clean, not dipped in solvent. Prevent resin build-up by cleaning with wire brush. Specifications: • Cut Length Metric: 10 • Be more→aring Dia Metric: 40 • Sawbore: 12

Bearing for slotting systems. Ball bearings should be wiped clean, not dipped in solvent. Prevent resin build-up by cleaning with wire brush. Specifications: • Cut Length Metric: 9 • Bea more→ring Dia Metric: 39 • Sawbore: 12

Bearing for slotting systems. Ball bearings should be wiped clean, not dipped in solvent. Prevent resin build-up by cleaning with wire brush. Specifications: • Cut Length Metric: 8 • Bea more→ring Dia Metric: 38 • Sawbore: 12

Bearing for slotting systems. Ball bearings should be wiped clean, not dipped in solvent. Prevent resin build-up by cleaning with wire brush. Specifications: • Cut Length Metric: 9 • Bea more→ring Dia Metric: 36 • Sawbore: 12

Bearing for slotting systems. Ball bearings should be wiped clean, not dipped in solvent. Prevent resin build-up by cleaning with wire brush. Specifications: • Cut Length Metric: 8 • Bea more→ring Dia Metric: 35 • Sawbore: 12