Bits & Sockets Sets

Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing fa more→ilure. Scrape off any resin build-up. Always check the tightness of the fixing screw before using cutter. Specifications: • Cut Length Metric: 5 • Bearing Dia Metric: 28 • Sawbore: 12.7 • Sawbore Imperial: 1/2

Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing fa more→ilure. Scrape off any resin build-up. sleeved and can be reground. Always check the tightness of the fixing screw before using cutter. Specifications: • Cut Length Metric: 4.76 • Cut Length Imperial: 3/16 • Bearing Dia Metric: 18.2 • Sawbore: 6.35 • Sawbore Imperial: 1/4

Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing fa more→ilure. Scrape off any resin build-up. Always check the tightness of the fixing screw before using cutter. Specifications: • Cut Length Metric: 5 • Cut Length Imperial: 13/64 • Bearing Dia Metric: 24 • Bearing Dia Imperial: 61/64 • Sawbore: 12.7 • Sawbore Imperial: 1/2

Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing fa more→ilure. Scrape off any resin build-up. Always check the tightness of the fixing screw before using cutter. Specifications: • Cut Length Metric: 5 • Cut Length Imperial: 13/64 • Bearing Dia Metric: 22 • Bearing Dia Imperial: 55/64 • Sawbore: 4.76 • Sawbore Imperial: 3/16

Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing fa more→ilure. Scrape off any resin build-up. Always check the tightness of the fixing screw before using cutter. Specifications: • Cut Length Metric: 6 • Cut Length Imperial: 15/64 • Bearing Dia Metric: 22 • Bearing Dia Imperial: 7/8 • Sawbore: 6.35 • Sawbore Imperial: 1/4

Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing fa more→ilure. Scrape off any resin build-up. Always check the tightness of the fixing screw before using cutter. Specifications: • Cut Length Metric: 5 • Cut Length Imperial: 13/64 • Bearing Dia Metric: 22 • Bearing Dia Imperial: 55/64 • Sawbore: 12.7 • Sawbore Imperial: 1/2

Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing fa more→ilure. Scrape off any resin build-up. Always check the tightness of the fixing screw before using cutter. Specifications: • Cut Length Metric: 5.9 • Bearing Dia Metric: 20 • Bearing Dia Imperial: 25/32 • Sawbore: 6.35 • Sawbore Imperial: 1/4

Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing fa more→ilure. Scrape off any resin build-up. Always check the tightness of the fixing screw before using cutter. Specifications: • Cut Length Metric: 6 • Bearing Dia Metric: 19 • Sawbore: 6

Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing fa more→ilure. Scrape off any resin build-up. Always check the tightness of the fixing screw before using cutter. Specifications: • Cut Length Metric: 5.55 • Cut Length Imperial: 7/32 • Bearing Dia Metric: 18 • Sawbore: 6.35 • Sawbore Imperial: 1/4

Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing fa more→ilure. Scrape off any resin build-up. Always check the tightness of the fixing screw before using cutter. Specifications: • Cut Length Metric: 5.55 • Cut Length Imperial: 7/32 • Bearing Dia Metric: 17 • Sawbore: 6.35 • Sawbore Imperial: 1/4

Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing fa more→ilure. Scrape off any resin build-up. Always check the tightness of the fixing screw before using cutter. Specifications: • Cut Length Metric: 4.9 • Bearing Dia Metric: 16 • Sawbore: 5

Trend Router Cutter Bearing - for 3/16in bottom mounting High quality ball bearing for free running against an edge to prevent heat build up. 3/16in inside diameter for use on bottom mounted trimmer more→and profiling cutters. 1/2in outside diameter for matched fit to trimming and templating cutters. Bearings are grease packed for maximum efficiency and lifespan. Shielding to both sides of the bearing prevents penetration of dust for maximum performance. Specifications: • Cut Length Metric: 4.76 • Cut Length Imperial: 3/16 • Bearing Dia Metric: 12.7 • Bearing Dia Imperial: 1/2 • Sawbore: 4.76 • Sawbore Imperial: 3/16

Trend Router Cutter Bearing - for 1/4in shank mounting High quality ball bearing for free running against an edge to prevent heat build up. 1/4in inside diameter for direct fit to router shanks and more→arbors. 1/2in outside diameter for matched fit to trimming and templating cutters. Bearings are grease packed for maximum efficiency and lifespan. Shielding to both sides of the bearing prevents penetration of dust for maximum performance. Specifications: • Cut Length Metric: 4.76 • Cut Length Imperial: 3/16 • Bearing Dia Metric: 12.7 • Bearing Dia Imperial: 1/2 • Sawbore: 6.35 • Sawbore Imperial: 1/4

Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing fa more→ilure. Scrape off any resin build-up. Always check the tightness of the fixing screw before using cutter. Specifications: • Cut Length Metric: 4.36 • Cut Length Imperial: 11/64 • Bearing Dia Metric: 12.7 • Bearing Dia Imperial: 1/2 • Sawbore: 3.2 • Sawbore Imperial: 1/8

Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing fa more→ilure. Scrape off any resin build-up. Always check the tightness of the fixing screw before using cutter. Specifications: • Cut Length Metric: 7.9 • Cut Length Imperial: 5/16 • Bearing Dia Metric: 28.6 • Bearing Dia Imperial: 1 1/8 • Sawbore: 12.7 • Sawbore Imperial: 1/2

For coves and part of a rule joint. Specifications: • Shank Diameter: 1/4 • Dia Metric: 8 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 56.7 & more→bull; Radius 1 Metric: 4

For coves and part of a rule joint. Specifications: • Shank Diameter: 1/4 • Dia Metric: 6 • Cut Length Metric: 15 • Overall Length Metric: 58.5 • Radius 1 Metric: 3

For coves and part of a rule joint. Specifications: • Shank Diameter: 1/4 • Dia Metric: 6.4 • Cut Length Metric: 11 • Overall Length Metric: 60.5 • Radius 1 Metric: 3.2

For coves and part of a rule joint. Specifications: • Shank Diameter: 1/4 • Dia Metric: 4.8 • Cut Length Metric: 11 • Overall Length Metric: 60 • Radius 1 Metric: 2.4

For coves and part of a rule joint. Specifications: • Shank Diameter: 1/4 • Dia Metric: 3.2 • Dia Imperial: 1/8 • Cut Length Metric: 9.5 • Cut Length Imperial: 3/8 • Ove more→rall Length Metric: 59.5 • Radius 1 Metric: 1.6

For coves and part of a rule joint. Specifications: • Shank Diameter: 1/4 • Dia Metric: 10 • Cut Length Metric: 18 • Overall Length Metric: 58 • Radius 1 Metric: 5

Template thickness should be 5mm thicker than cut length of cutter. Specifications: • Shank Diameter: 1/4 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 9.5 • Cu more→t Length Imperial: 3/8 • Overall Length Metric: 50 • Bearing Dia Metric: 12.7 • Bearing Dia Imperial: 1/2 • Radius 1 Metric: 6.35