Bits & Sockets Sets

These are made from a single piece of High Speed Steel, ground with a very fine edge. They are only suitable for non abrasive materials, but will give a superior finish in soft timbers. Generally more→HSS cutters are slightly less expensive than their TC grades, but can be more suitable for certain applications. Single flute cutters with extra long shanks. Specifications: • Shank Diameter: 1/4 • Dia Metric: 4.8 • Dia Imperial: 3/16 • Cut Length Metric: 19 • Overall Length Metric: 60

Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods. For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the more→most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks. Specifications: • Shank Diameter: 1/4 • Dia Metric: 12 • Dia Imperial: 15/32 • Cut Length Metric: 19 • Overall Length Metric: 70

With ball bearing guide. To trim plastic or laminate facings. Used extensively in cabinet making and shop fitting. Suitable for straight or curved work.

Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix S are Solid Carbide. Cutters of 2.0mm diameter and more→below should have a maximum of 1.0mm depth of cut per pass. Small diameter tools must be handled with care to avoid breakage. Single flute cutters should not be used in eccentric chucks. Specifications: • Shank Diameter: 1/4 • Dia Metric: 1 • Cut Length Metric: 3 • Overall Length Metric: 49 • Type or Grade: Solid Carbide Insert

Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix S are Solid Carbide. Cutters of 2.0mm diameter and more→below should have a maximum of 1.0mm depth of cut per pass. Small diameter tools must be handled with care to avoid breakage. Single flute cutters should not be used in eccentric chucks. Specifications: • Shank Diameter: 1/4 • Dia Metric: 2 • Dia Imperial: 5/64 • Cut Length Metric: 5 • Overall Length Metric: 43

Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Small diameter tools must be handled with care to avoid breakage. Singl more→e flute cutters should not be used in eccentric chucks. Specifications: • Shank Diameter: 1/2 • Dia Metric: 9.5 • Dia Imperial: 3/8 • Cut Length Metric: 25 • Overall Length Metric: 70

Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix S are Solid Carbide. Cutters of 2.0mm diameter and below should have a maximum of 1.0mm d more→epth of cut per pass. Small diameter tools must be handled with care to avoid breakage. Single flute cutters should not be used in eccentric chucks.

Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Small diameter tools must be handled with care to avoid breakage. Singl more→e flute cutters should not be used in eccentric chucks. Specifications: • Shank Diameter: 1/4 • Dia Metric: 6.3 • Dia Imperial: 1/4 • Cut Length Metric: 25 • Overall Length Metric: 57

Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Small diameter tools must be handled with care to avoid breakage. Singl more→e flute cutters should not be used in eccentric chucks. Specifications: • Shank Diameter: 1/4 • Dia Metric: 5 • Cut Length Metric: 19 • Overall Length Metric: 51

Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix S are Solid Carbide. Cutters of 2.0mm diameter and below should have a maximum of 1.0mm d more→epth of cut per pass. Small diameter tools must be handled with care to avoid breakage. Single flute cutters should not be used in eccentric chucks.

Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix S are Solid Carbide. Small diameter tools must be h more→andled with care to avoid breakage. Single flute cutters should not be used in eccentric chucks. Specifications: • Shank Diameter: 1/4 • Dia Metric: 3 • Cut Length Metric: 11 • Overall Length Metric: 50

Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix S are Solid Carbide. Small diameter tools must be h more→andled with care to avoid breakage. Single flute cutters should not be used in eccentric chucks. Specifications: • Shank Diameter: 1/4 • Dia Metric: 2.7 • Dia Imperial: 7/64 • Cut Length Metric: 8 • Overall Length Metric: 48

Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Cutters with prefix S are Solid Carbide. Cutters of 2.0mm diameter and more→below should have a maximum of 1.0mm depth of cut per pass. Small diameter tools must be handled with care to avoid breakage. Single flute cutters should not be used in eccentric chucks. Specifications: • Shank Diameter: 1/4 • Dia Metric: 1.8 • Cut Length Metric: 6 • Overall Length Metric: 43 • Type or Grade: Solid Carbide Insert

Trend Single Flute Cutters are chosen for fast, free cutting when cutting speed takes preference over finish. If you require a cleaner cut, two flute cutters are recommended. Suitable for grooving, re more→bating, morticing and drilling. Cutters of 2.0mm diameter and below should have a maximum of 1.0mm depth of cut per pass. Small diameter tools must be handled with care to avoid breakage. Single flute cutters should not be used in eccentric chucks.

Tungsten Carbide Tipped. Two flute cutter with a positive shear angle (down-cut) for fast cutting and fine finish. Ideal for grooving & trimming veneer finishes & laminated boards. Down cut feature more→stops break out on top edge. Has a 4 degree shear. Specifications: • Shank Diameter: 1/4 • Dia Metric: 9.5 • Dia Imperial: 3/8 • Cut Length Metric: 25 • Overall Length Metric: 54

Tungsten Carbide Tipped. Two flute cutter with a positive shear angle (down-cut) for fast cutting and fine finish. Ideal for grooving & trimming veneer finishes & laminated boards. Down cut feature more→stops break out on top edge. Has a 4 degree shear. Specifications: • Shank Diameter: 1/2 • Dia Metric: 9.5 • Dia Imperial: 3/8 • Cut Length Metric: 25 • Overall Length Metric: 70

Cuts groove for Trend Routaseal. Position seal into apex of jamb and stop. More economic to use than more complex seals. Use with a small 1/4 inch shank hand router. Use STC for abrasive material. more→Specifications: • Shank Diameter: 1/4 • Dia Metric: 5 • Cut Length Metric: 3 • Overall Length Metric: 61 • Angle: 115

For dovetail joints and sliding dovetails. Can be used with Ref.10/40 butterfly 14 degree spline cutter. Specifications: • Shank Diameter: 1/2 • Dia Metric: 25.4 • Dia Imperial: 1 &b more→ull; Cut Length Metric: 25.4 • Overall Length Metric: 69 • Angle: 104

For dovetail joints and sliding dovetails. Can be used with Ref.10/40 butterfly 14 degree spline cutter. Specifications: • Shank Diameter: 1/2 • Dia Metric: 19.1 • Dia Imperial: 3/4 more→• Cut Length Metric: 19.1 • Overall Length Metric: 66 • Angle: 104

For dovetail joints and sliding dovetails. Can be used with Ref.10/40 butterfly 14 degree spline cutter. Specifications: • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 more→• Cut Length Metric: 10 • Cut Length Imperial: 1/2 • Overall Length Metric: 60 • Angle: 104

One flute straight cutter from the Dolls house cutter set. D: 2 mm C: 5 mm Shank Diameter: 1/4 inch Shank Diameter: 1/4 Dia Metric: 2 Cut Length Metric: 5

Two part ABS plastic inserts enabling the tidy ducting of computer, telephone, & audio cables, through desktops, cabinets & shelving units. The 60mm & 80mm inserts have a spring loaded swivel coverpla more→te. Cover plates can be removed to allow plugs to pass through. Size: 60 mm Colour: Light grey

Two part ABS plastic inserts enabling the tidy ducting of computer, telephone, & audio cables, through desktops, cabinets & shelving units. The 60mm & 80mm inserts have a spring loaded swivel coverpla more→te. Cover plates can be removed to allow plugs to pass through. Contents: 3 x Circular inserts

Two part ABS plastic inserts enabling the tidy ducting of computer, telephone, & audio cables, through desktops, cabinets & shelving units. The 60mm & 80mm inserts have a spring loaded swivel coverpla more→te. Cover plates can be removed to allow plugs to pass through. Size: 60 mm Colour: Brown