Bits & Sockets Sets

Ideal for posts and newel caps for stairs. Specifications: • Shank Diameter: 1/4 • Dia Metric: 25.4 • Dia Imperial: 1 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 &bu more→ll; Overall Length Metric: 64 • Bearing Dia Metric: 9.5 • Angle: 60

This double ribbed ovolo style is an alternative to the rounding over cutter. If the cutter is lowered, a top quirk can be produced. Specifications: • Shank Diameter: 1/4 • Dia Metric: 34.7 more→• Cut Length Metric: 17.5 • Cut Length Imperial: 11/16 • Overall Length Metric: 69 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 5.5 • Radius 2 Metric: 5.5

This double ribbed ovolo style is an alternative to the rounding over cutter. If the cutter is lowered, a top quirk can be produced. Specifications: • Shank Diameter: 1/4 • Dia Metric: 28.7 more→• Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 64 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 4 • Radius 2 Metric: 4

Trend Craft Pro 1/4in shank bearing guided trimmer cutter - 12.7mm diameter Triple Flute Carbide tips. Triple flute carbide TCT tips ensure the cleanest of finishes on timber, plastic laminates and v more→eneers. 25mm cutting depth, ideal for replicating shallow components with templates. 1/4in shank for smaller routers and easy control for hand held trimming use on curved and straight edge work or to follow patterns and templates. PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. 1/4in shank for easy control in smaller routers with 'K'mark shank to ensure safe working practices. Specifications: • Shank Diameter: 1/4 • Dia Metric: 12.7 …

Three flute self-guiding for extra fine trimming of laminate or plywood overlay. Specifications: • Shank Diameter: 1/4 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: more→12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 67 • Bearing Dia Metric: 12.7 • Angle: 90

For trimming top & lip. Economical cutters, perform 3 functions: 1. To top trim the overlay at 90 degrees. 2. To trim the overlay at 45 degrees or 60 degrees. 3. The base of the cutter can trim t more→he vertical lipping at 90 degrees. Requires side fence or roller bearing. Specifications: • Shank Diameter: 1/4 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 41.3

Use for bevelling, chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose. Specifications: • Shank Diameter: 1/2 • Dia Metric: 11 • Cut Lengt more→h Metric: 5 • Overall Length Metric: 54.5 • Angle: 45

Use for bevelling, chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose. Specifications: • Shank Diameter: 1/4 • Dia Metric: 11 • Cut Lengt more→h Metric: 5 • Overall Length Metric: 52.5 • Angle: 45

Use for bevelling, chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose. Is ideal for imitating 'V' jointed tongue and groove on man-made board. Specific more→ations: • Shank Diameter: 1/2 • Dia Metric: 22.28 • Cut Length Metric: 6 • Overall Length Metric: 54.5 • Angle: 30

Use for bevelling, chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose. Specifications: • Shank Diameter: 1/4 • Dia Metric: 22.28 • Cut Le more→ngth Metric: 6 • Overall Length Metric: 54.5 • Angle: 30

Use for bevelling, chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose. Is ideal for imitating 'V' jointed tongue and groove on man-made board. Specific more→ations: • Shank Diameter: 1/2 • Dia Metric: 19.4 • Dia Imperial: 3/4 • Cut Length Metric: 9.2 • Overall Length Metric: 56 • Angle: 45

Use for bevelling, chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose. Is ideal for imitating 'V' jointed tongue and groove on man-made board. Specific more→ations: • Shank Diameter: 8 mm • Dia Metric: 19.4 • Dia Imperial: 3/4 • Cut Length Metric: 9.2 • Overall Length Metric: 56 • Angle: 45

Two Flute V-Grooving Bits for veining work and decor of panels. 1/4" Shank Diameter 45 V-Grooving

Use for bevelling, chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose. Specifications: • Shank Diameter: 1/2 • Dia Metric: 17.5 • Cut Len more→gth Metric: 8 • Overall Length Metric: 52.7 • Angle: 45

Use for bevelling, chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose. Specifications: • Shank Diameter: 1/4 • Dia Metric: 17.5 • Cut Len more→gth Metric: 8 • Overall Length Metric: 52.7 • Angle: 45

Use for bevelling and chamfering. A flat, approximately 1.0mm, will be found on V Groove tip.

Use for bevelling, chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose. Specifications: • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imp more→erial: 1/2 • Cut Length Metric: 6.5 • Overall Length Metric: 54 • Angle: 45

Use for bevelling, chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose. Specifications: • Shank Diameter: 1/2 • Dia Metric: 12.89 • Dia Im more→perial: 1/2 • Cut Length Metric: 10.3 • Overall Length Metric: 60 • Angle: 60

With ball bearing guide. To trim plastic or laminate facings. Used extensively in cabinet making and shop fitting. Suitable for straight or curved work.

A single fluted high steel cutter for pierce and trimming of aluminium faced panels in the caravan industry. Specifications: • Shank Diameter: 1/4 • Dia Metric: 6.3 • Dia Imperial: 1/4 more→• Cut Length Metric: 19.1 • Overall Length Metric: 76

Replacement bradawl only for the Hinge Jig. Requires spacer.

Replacement bradawl only for the H/JIG/C. Short blade.

These cutters are self-guiding and can be used to produce rebates, lap joints, tongues and rebated corners. When using bearing Ref. B95A make two passes when a full depth of cut is required. Specif more→ications: • Shank Diameter: 1/4 • Dia Metric: 31.8 • Dia Imperial: 1 1/4 • Cut Length Metric: 15.9 • Overall Length Metric: 59.5 • Bearing Dia Metric: 9.5 • Rebate Metric: 10

These cutters are self-guiding and can be used to produce rebates, lap joints, tongues and rebated corners. When using bearing Ref. B95A make two passes when a full depth of cut is required. Specif more→ications: • Shank Diameter: 1/2 • Dia Metric: 31.8 • Dia Imperial: 1 1/4 • Cut Length Metric: 15.9 • Overall Length Metric: 65.5 • Bearing Dia Metric: 9.5 • Rebate Metric: 10