Bits & Sockets Sets

Fully ground with a 135° split point for precise centring
Black oxide coating for durability and resistance to corrosion
Does not need to be used in conjunction with a cooling agent
Suitable for use with metal, wood, chipboard and plastic
Compatible with a standard 10/13mm chuck
Sizes 1.0-10.0mm
Supplied inside a metal case
Manufactured to DIN338 and ISO235/1

NK.A 3/4" drive impact extensions. For your safety, use impact extensions and accessories with the appropriate rings and pins. Specifications • Drive: 3/4" • Size: 330mm

• NON-SPARKING SAFETY TOOLS – Part of the Sealey Premier Range of Non-Sparking tools suitable for professional daily use. • BERYLLIUM COPPER – Manufactured from non-sparking but physically tough and non-magnetic copper meeting requirements of ATEX Directive for zones 0, 1 and 2. • FOR USE IN ENVIRONMENTS OF RISK – Beryllium copper is resistant to non-oxidising acids making it resistant to abrasive wear and galling. • DIE FORGED – Heat treated for increased strength, durability, and electrical conductivity. • 12PT WALLDRIVE SOCKET – Designed to grip the flats of the fixing allowing for 30% more torque to be applied than traditional hex sockets without causing damage. • 1/2”SQ DRIVE – 23mm Socket with…

The Package Height of the Product is 0.78 centimeters
The Package Length of the Product is 4.19 centimeters
The Package Width of the Product is 2.22 centimeters
17 Piece Set Teng's 17 piece metric socket set TT1218 contains 12 point sockets plus a ratchet handle with quick release and flip reverse, 2 1/2” and 6” extension bars, 3/8-1/2” adaptor as well as a universal joint. Supplied in the unique Teng Tools TC tray with removable lid and dove tail joints for use on it’s own or as part of the Teng Tools TC control system. Accessories 1/2” drive Ratchet, universal joint, 21⁄2” and 6” extensions, 3/8” F:1/2” M T bar adaptor Regular sockets 1/2” drive 12 point 10, 11, 12, 13, 14, 15, 16,17, 18…

Country of origin:- Spain
Item Package Quantity: 1
Package Weight: 2.06 kilograms
Package Dimensions (L x B x H) in cm: 5.5 x 14.5 x 27

Access to pipes & cables beneath chipboard floors in seconds. For builders, plumbers & electricians. A 250mm diameter opening can be cut and made good in seconds. Designed for use in new or existing 18mm chipboard or similar floors. Cuts only the thickness of the board. No waste, the piece cut out is used to make good the floor. All you need is a plunge router (750 watts or above). A Unibase may be required for certain makes and models of router. Supplied with three floor rings Specifications: • Shank Diameter: 1/4 • Cut Length Metric: 18 Contents: 1 x Routabout template 3 x Spacer rings 1 x Special TCT router cutter 1 x 30mm Plastic guide bush

Access to pipes & cables beneath chipboard floors in seconds. For builders, plumbers & electricians. A 250mm diameter opening can be cut and made good in seconds. Designed for use in new or existing 18mm chipboard or similar floors. Cuts only the thickness of the board. No waste, the piece cut out is used to make good the floor. All you need is a plunge router (750 watts or above). A Unibase may be required for certain makes and models of router. Supplied with three floor rings Specifications: • Shank Diameter: 1/2 • Cut Length Metric: 18 Contents: 1 x Routabout template 3 x Spacer rings 1 x Special TCT router cutter 1 x 30mm Plastic guide bush

Especially designed for routing Corian, and similar luxury 'marble like' material which is used in many bathrooms and kitchens. For bullnose moulding use Ref. 90/28 with Ref. 90/21. Specifications: • Shank Diameter: 1/2 • Dia Metric: 50 • Cut Length Metric: 25 • Overall Length Metric: 73 • Bearing Dia Metric: 12.7 • Bearing Dia Imperial: 1/2 • Radius 1 Metric: 19

Ideally suited for cutting radiused edges at speed, as a side fence can be dispensed with. The guide bearing follows the vertical edge or template. Specifications: • Shank Diameter: 1/2 • Dia Metric: 63.5 • Cut Length Metric: 25.4 • Cut Length Imperial: 1 • Overall Length Metric: 75 • Bearing Dia Metric: 12.7 • Radius 1 Metric: 25.4 • Radius 1 Imperial: 1

Some Ovolo cutters can be used with radius cutters, to make rule joints. Specifications: • Shank Diameter: 1/2 • Dia Metric: 60 • Cut Length Metric: 27 • Overall Length Metric: 65.1 • Radius 1 Metric: 20

Ideal for producing nosings and attractive edge moulds. Specifications: • Shank Diameter: 1/2 • Dia Metric: 33 • Cut Length Metric: 20 • Overall Length Metric: 75 • Radius 1 Metric: 10

Ideal for producing nosings and attractive edge moulds. Specifications: • Shank Diameter: 1/2 • Dia Metric: 42.9 • Cut Length Metric: 25.4 • Overall Length Metric: 78 • Radius 1 Metric: 12.7

These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut. Specifications: • Dia Metric: 50 • Sawbore: M12 • Saw Kerf Metric: 11 • Saw Teeth: 4