Bits & Sockets Sets

Bearing guided tool to rout stepped groove for espagnolette lock recess. Two flute for clean finish. Specifications: • Shank Diameter: 1/2 • Dia Metric: 40.05 • Cut Length Metric: 16. more→3/12.3 • Overall Length Metric: 85 • Bearing Dia Metric: 19.1 • Bearing Dia Imperial: 3/4

Four fluted TCT trimmer/profiler. Super fine finish. Ball bearings fitted to both nose and shank. Allows templates to be placed either on top or the bottom of the material, for ease of routing. more→Allows for irregular grained timber to be profiled more easily, by turning component other way up. Light passes, maximum 2mm trimming. Specifications: • Shank Diameter: 1/2 • Dia Metric: 19.1 • Dia Imperial: 3/4 • Cut Length Metric: 50 • Cut Length Imperial: 1 31/32 • Overall Length Metric: 114.5 • Bearing Dia Metric: 19.1

This Raised Panel cutter runs best at lower speeds between 12,000 and 18,000 RPM. Matches our range of profile scribers. Suitable for use on natural timber and MDF. When joining sections to produ more→ce solid wood panels, alternate the growth ring direction of adjacent boards to prevent cupping. When moulding the panel, cut across the end grain first. Any break out will then be removed when cutting with the grain. Suitable panel mould for use with Ref. PSC/5. Specifications: • Shank Diameter: 1/2 • Dia Metric: 50 • Dia2 Metric: 16 • Cut Length Metric: 17 • Overall Length Metric: 55.1 • Angle: 10

Flat Roman Ogee, for raised panelling or edge moulding. Used for decorative capping on hand rails. Specifications: • Shank Diameter: 1/2 • Dia Metric: 41.5 • Cut Length Metric: 8 &bull more→; Overall Length Metric: 56 • Radius 1 Metric: 19 • Radius 2 Metric: 11

Flat Roman Ogee, for raised panelling or edge moulding. Used for decorative capping on hand rails. Specifications: • Shank Diameter: 1/2 • Dia Metric: 50 • Cut Length Metric: 6.5 &bull more→; Overall Length Metric: 51.8 • Radius 1 Metric: 20 • Radius 2 Metric: 12

A popular variety, the Modern Torus skirting board mould. Specifications: • Shank Diameter: 1/2 • Dia Metric: 35 • Dia Imperial: 1 3/8 • Cut Length Metric: 39 • Overall Lengt more→h Metric: 88 • Bearing Dia Metric: 16 • Radius 1 Metric: 9.5

The whole profile edge of the cutter can be used for skirting boards and period style finishes in furniture. Different parts of these cutters can be used to give various profiles. Specifications: &bu more→ll; Shank Diameter: 1/2 • Dia Metric: 35 • Dia Imperial: 1 3/8 • Cut Length Metric: 42 • Overall Length Metric: 90.5 • Bearing Dia Metric: 12.7 • Bearing Dia Imperial: 1/2 • Radius 1 Metric: 3.2 • Radius 2 Metric: 6.5

Machining of traditional panels and frame doors, formerly done on spindle moulders, can now be performed with heavy duty routers mounted in fixed positions, either overhead or inverted. These Raised P more→anel cutters run best at lower speeds and match our range of profile scribers. All are suitable for use on natural timber and MDF. 8mm hank tools are for use with medium and heavy duty routers only. Suitable panel mould for use with Refs. PSC/2 & PSC/20. Specifications: • Shank Diameter: 1/2 • Dia Metric: 50 • Dia2 Metric: 22 • Cut Length Metric: 14 • Overall Length Metric: 52 • Radius 1 Metric: 14

Two rounded corners can be cut simultaneously. By adjusting the assembly of spacers on the arbor, timber between 10mm and 32mm thick can be moulded. Central guide bearing can be removed and fitted more→above or below the cutters. Specifications: • Shank Diameter: 1/2 • Dia Metric: 38 • Overall Length Metric: 96 • Bearing Dia Metric: 28 • Radius 1 Metric: 5

A one piece bearing guided set. Parts are inter-changed on the arbor to alter the set-up. Specifications: • Shank Diameter: 1/2 • Dia Metric: 41 • Cut Length Metric: 6.35 • Overa more→ll Length Metric: 76 • Rebate Metric: 22

Classic skirting board mould. Specifications: • Shank Diameter: 1/2 • Dia Metric: 37 • Cut Length Metric: 40 • Overall Length Metric: 89 • Bearing Dia Metric: 16 • Radi more→us 1 Metric: 13.5

Classic skirting board mould with a curved return to the edge. Specifications: • Shank Diameter: 1/2 • Dia Metric: 35 • Dia Imperial: 1 3/8 • Cut Length Metric: 41 • Overall more→Length Metric: 90 • Bearing Dia Metric: 16 • Radius 1 Metric: 10

The SDS max-7 Drill Bit is ideal for use at the highest drilling speeds. Its solid carbide S-cutter and inclined side cutters enable very fast drilling. Furthermore, the bit´s vibration-optimised flut more→e design offers the best power transfer and increases in speed. This product is intended for use in concrete and reinforced concrete, limestone and masonry. To achieve accurate results, the visibility of the wear mark indicates if the diameter of the hole is still in tolerance for metal anchor setting. As proof of quality, the drill bit bears the test mark of the PGM Masonry Drill Bit Association Board, guaranteeing compliance with tight tolerances, exact drilling and the firm hold of fixings. I…

For coves and part of a rule joint. Specifications: • Shank Diameter: 1/2 • Dia Metric: 32 • Cut Length Metric: 31.7 • Overall Length Metric: 71 • Radius 1 Metric: 16

The two bearings supplied offer the means of cutting different depths of mouldings. Specifications: • Shank Diameter: 1/2 • Dia Metric: 50.8 • Dia Imperial: 2 • Cut Length Metric: more→25.4 • Cut Length Imperial: 1 • Overall Length Metric: 75 • Bearing Dia Metric: 12.7 • Bearing Dia Imperial: 1/2 • Radius 1 Metric: 19.1

Set of sockets, 1/4" female drive, chrome-plated. Contents: .tg {border-collapse:collapse;border-spacing:0;}.tg td{font-family:Arial, sans-serif;font-size:14px;padding:10px 5px;border-style:solid;bord more→er-width:1px;overflow:hidden;word-break:normal;border-color:black;}.tg th{font-family:Arial, sans-serif;font-size:14px;font-weight:normal;padding:10px 5px;border-style:solid;border-width:1px;overflow:hidden;word-break:normal;border-color:black;}.tg .tg-s268{text-align:left} Product Code Part Number Key dimensions L 1 A Weight mm mm mm mm g 009000404 900FTX 4 E4 5.4 22 11.2 4.5 7 009000405 900FTX 5 E5 6.7 22 11.2 4.5 7.5 009000406 900FTX 6 E6 7.7 22 11.2 5 8 009000407 900FTX 7 E7 8.3 22 11.2 5.8 …