Bits & Sockets Sets

For use in a router table only. Take 3 - 4 passes, increasing the depth with each pass. Suitable for straight panels only. Specifications: • Shank Diameter: 1/4 • Dia Metric: 28 • Di more→a Imperial: 1 7/64 • Dia2 Metric: 9.5 • Cut Length Metric: 30 • Cut Length Imperial: 1 3/16 • Overall Length Metric: 70 • Radius 1 Metric: 22 • Radius 2 Metric: 18

Designed for sash bar window construction. Specifications: • Shank Diameter: 1/4 • Dia Metric: 22 • Cut Length Metric: 18 • Overall Length Metric: 46.6 • Radius 1 Metric: 10

Supplied with alternative bearings to produce a rounding over and two sizes of ovolo moulding. The smaller bearing gives a 3.2mm quirk. Specifications: • Shank Diameter: 1/4 • Dia Metric: more→35 • Cut Length Metric: 16 • Overall Length Metric: 66 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 9.5 • Radius 1 Imperial: 3/8

Use for producing mortar grooves and for bevelling applications. Specifications: • Shank Diameter: 1/2 • Dia Metric: 41 • Cut Length Metric: 22.5 • Overall Length Metric: 62.5 &bu more→ll; Angle: 45

Trend Two Flute Straight Cutters produce a cleaner finish than single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges. Cor more→ners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. This Trend 4/30 x 1/2 TCT Two Flute Cutter has the following specification D 18mm (45/64in) C 50mm OL 92mm Shank Diameter 1/2in

Template thickness should be 5mm thicker than cut length of cutter. Specifications: • Shank Diameter: 1/4 • Dia Metric: 19 • Cut Length Metric: 11 • Overall Length Metric: 55 &bul more→l; Bearing Dia Metric: 19 • Radius 1 Metric: 9.5

With bearing guided ogees, change profile by using a larger bearing and vary the depth. Specifications: • Shank Diameter: 1/2 • Dia Metric: 34.9 • Cut Length Metric: 20 • Overall more→Length Metric: 67.5 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 6.3

With bearing guided ogees, change profile by using a larger bearing and vary the depth. Specifications: • Shank Diameter: 1/4 • Dia Metric: 34.9 • Cut Length Metric: 20 • Overall more→Length Metric: 58 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 6.3

For abrasive materials. Tools will drill, countersink and finally counterbore a parallel hole. Designed to receive plug produced by maker Ref. 24 group. The drill diameter sizes are for a clearance ho more→le only. Specifications: • Shank Diameter: 1/4 • Dia Metric: 12 • Dia2 Metric: 5.5 • Cut Length Metric: 20 • Overall Length Metric: 62

For abrasive materials. Tools will drill, countersink and finally counterbore a parallel hole. Designed to receive plug produced by maker Ref. 24 group. The drill diameter sizes are for a clearance ho more→le only. Specifications: • Shank Diameter: 1/4 • Dia Metric: 9.5 • Dia Imperial: 3/8 • Dia2 Metric: 4.8 • Cut Length Metric: 20 • Overall Length Metric: 62

Purpose made for stair housing jigs. Ensures tight fit of tread in string. Specifications: • Shank Diameter: 1/2 • Dia Metric: 14 • Cut Length Metric: 20 • Overall Length Metri more→c: 65 • Type or Grade: RH • Angle: 95

Purpose made for stair housing jigs. Ensures tight fit of tread in string. Specifications: • Shank Diameter: 1/2 • Dia Metric: 16 • Dia Imperial: 5/8 • Cut Length Metric: 26 &b more→ull; Overall Length Metric: 65 • Type or Grade: RH • Angle: 95

These machine bits are typically used by kitchen furniture manufacturers for recessing circular hinges. This type with scribers is used on veneered and wood finishes. Use with pillar drills only. Sp more→ecifications: • Shank Diameter: 3/8 • Dia Metric: 35 • Dia Imperial: 1 3/8 • Overall Length Metric: 65 • Type or Grade: TCT

Has three flutes, and has bevelled corners to prevent scoring, and is for flush trimming of hardwood or plastic edge strip. Specifications: • Shank Diameter: 1/4 • Dia Metric: 25 • Cut more→Length Metric: 12 • Overall Length Metric: 44.5 • Angle: 90

Wera - Tools for bicycles and e-bikes Bicycle Set 8: Bit nuts for the most common TORX® and Hex screws, 7-piecesFeatures:- 7-piece bit nut set with 3/8´´ drive for typical bicycle applications- Bit nu more→ts with 30 mm long and extra slim profile area for better accessibility in tight working spaces - Knurling facilitates hand screwing without slipping off - With Take it easy - tool finder with color coding according to sizes - for easy and fast finding of the required tool - Comes in a sturdy folding bag for easy carry along Specifications:Included in the set:B TORX® Zyklop bit nut with 3/8´´ drive, with extra slim profile range: - TX 25 x 107 mm - TX 30 x 107 mm B Zyklop bit nut with 3/8´´ drive, w…

The SDS plus-5 Drill Bit allows for effortless drilling. For smooth work, the carbide plate is grooved and bears notches that penetrate material more easily and prevent jamming in concrete. Drill guid more→ance for easy starts without jarring or wandering is provided by the Activeteq centring tip, which keeps the drill in place for a precise hole diameter. Furthermore, AWB brazing and hardening technology reduces vibration during drilling to minimise strain on the user. The bit is intended for use on masonry and concrete. To achieve accurate results, the visibility of the wear mark indicates if the diameter of the hole is still in tolerance for metal anchor setting. As proof of quality, the drill …