Bits & Sockets Sets

3 degree undercut router bits for routing a leading edge on doors to allow a tight fit against jamb. Shank mounted bearing self guides the cutter along door edge. Specifications: • Shank Diame more→ter: 12 mm • Dia Metric: 24.3 • Cut Length Metric: 50 • Overall Length Metric: 101 • Bearing Dia Metric: 19 • Angle: 3

Profiler with shank mounted bearing guides. For use with router mounted above or below a table when following a template. For profiling and rebating applications only. Not for plunge cutting/groo more→ving. A 3mm maximum overlap should be left before trimming. They are ideal for template making. Specifications: • Shank Diameter: 1/2 • Dia Metric: 19.1 • Dia Imperial: 3/4 • Cut Length Metric: 63 • Overall Length Metric: 115 • Bearing Dia Metric: 19.1 • Bearing Dia Imperial: 3/4

Self-guiding trimmers with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling, use the bearing to follow a template or base edge of board. An approxim more→ate 3mm overlap should be left before copy profiling. When using plastic laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Specifications: • Shank Diameter: 1/2 • Dia Metric: 18.2 • Cut Length Metric: 50 • Overall Length Metric: 103 • Bearing Dia Metric: 18.2

Self-guiding trimmers with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling, use the bearing to follow a template or base edge of board. A maximum of more→3mm overlap should be left before copy profiling. When using plastic laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Specifications: • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 51 • Cut Length Imperial: 2 • Overall Length Metric: 106 • Bearing Dia Metric: 12.7 • Bearing Dia Imperial: 1/2

These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut. Specifications: • Dia Metric: 50 • Sawbore: M12 • Saw Kerf Me more→tric: 7 • Saw Teeth: 4

Precision made plug makers for use on natural timber, exactly matching the holes produced by the Saw Tooth Forstners groups 1306 & 1307. These have four to six wings to ensure a clean cut. Use a slow more→, constant feed rate ensuring timber is clamped to bed of drilling machine. Do not use these tools on abrasive timber or hard plastics or metal. Not suitable for use with a router. Not for use with hand held power tools or routers. Specifications: • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 76.2 • Overall Length Metric: 139.7

9-piece set in a robust textile box. One 411 A RA T-handle adapter screwdriver with ratchet function, for 1/4" sockets. The integrated ratchet with fine toothing (80 teeth/return angle 4.5°) eases and more→accelerates screwdriving without having to reposition the tool. The ratchet mechanism completely embedded in the handle ensures very handy and comfortable work. With reversing lever for comfortable clockwise/counterclockwise direction change in one-hand operation. The ergonomic shape of the handle fills the ball of the hand well, the fingers lie securely in the softly rounded recessed grips. The whole hand comes into contact with the handle, friction loss between hand and handle is avoided. For 1…

The Diamond Drill Bit Easy Dry makes dry drilling in ceramic easy. Its integrated coolant storage allows for smooth performance, while the bit´s robust and wear-resistant vacuum-brazed diamonds make w more→ork easier. Additionally, a working length of 33 mm allows the bit to comfortably drill holes in tiles of all thicknesses. This product is intended for a variety of materials from soft wall tiles to very hard floor tiles and fine stoneware. This robust and compact set features a transparent storage box providing a good overview of its contents as well as safe storage and transport. Do not drill in impact mode. It is suitable for use in cordless screwdrivers and drills with a 13 mm-chuck. 3-piece d…

The BOSCH PROFESSIONAL Expert SDS Max-8x 22x800x920 mm Wall Hammer Drill Bit is a high-quality and durable drill bit designed for professionals. It is specifically crafted for use with electric tools more→and accessories. The drill bit features an SDS Max-8x design, which ensures maximum power transfer and stability while drilling through walls. This makes it an ideal choice for heavy-duty applications, such as drilling into concrete or masonry.With a diameter of 22mm and a length of 800mm, this drill bit offers versatility and precision. It is capable of drilling deep holes with ease, allowing for a wider range of applications. The length of 920mm makes it especially suitable for drilling through …

A selection of Dormer Rotary Burr Bits Specifications: Rotary Burr - Cylinder without endcut (P6019.6X6.0) • Shank Size: 6mm • Diameter: 9.6mm • Cutter Length: 19mm • Total Length more→: 64mm • Shape: A • Application: Cylinder without endcut Rotary Burr - Ball Nosed Cylinder (P6059.6X6.0) • Shank Size: 6mm • Diameter: 9.6mm • Cutter Length: 19mm • Total Length: 64mm • Shape: C • Application: Ball Nosed Cylinder Rotary Burr – Ball (P6079.6X6.0) • Shank Size: 6mm • Diameter: 9.6mm • Cutter Length: 8mm • Total Length: 54mm • Shape: D • Application: Ball Rotary Burr - Ball Nosed Tree (P6119.6X6.0) • Shank Si…

This glow plug socket set from Expert by Facom comprises six 3/8" square drive sockets supplied in a convenient storage case. Each socket is fitted with a universal joint, friction sprung for accommod more→ating different socket angles.Includes:Six 3/8" Square drive sockets 8 - 9 - 10 - 12 - 14 - 16mm

The 1/4" drive PICO Hexagon Socket Set is a versatile addition to your toolkit, offering a range of metric socket sizes to meet diverse needs. Crafted from premium materials, these sockets deliver dur more→ability and consistent performance, ensuring they withstand the rigors of demanding tasks. The compact and portable nature of the PICO set makes it ideal for work in confined spaces or on intricate components, providing the flexibility needed for various applications. Features & Benefits • All hex sockets are the same height • Ultra compact with full metal finish Contents • 1x R.180HX • 5.5, 6, 7, 8, 9, 10, 11, 12, 13 and 14mm

NM.LA 1" drive long reach metric 6-point impact sockets. For your safety, use impact sockets and accessories with the appropriate rings and pins. Specifications • Drive: 1” • Size: 42mm

NM.LA 1" drive long reach metric 6-point impact sockets. For your safety, use impact sockets and accessories with the appropriate rings and pins. Specifications • Drive: 1” • Size: 46mm

With plunge cut these cutters can be used to cut and mould hand holes in stool seats. Specifications: • Shank Diameter: 1/2 • Dia Metric: 20 • Cut Length Metric: 22 • Overall Len more→gth Metric: 74 • Radius 1 Metric: 18

Ideal for shelves. Edge moulding applications only. Specifications: • Shank Diameter: 1/2 • Dia Metric: 20 • Cut Length Metric: 20 • Overall Length Metric: 48.5 • Bearing Dia more→Metric: 16 • Radius 1 Metric: 2