Bits & Sockets Sets

• One of a comprehensive range of Premier Hand Tools, suitable for daily professional use.• Forged Chrome Vanadium steel shafts, heat treated and chrome plated with mirror finish.• Deep knurling on shafts allows extra grip when spinning off fixings.• Spring-ball socket retainers.• Sizes: 50, 125, 250, 375, 500mm.• Lifetime guarantee*.Forged Chrome Vanadium steel shafts, heat treated and chrome plated with mirror finish. Deep knurling on shafts allows extra grip when spinning off fixings. Spring-ball socket retainers.• Forged Chrome Vanadium steel shafts, heat treated and chrome plated with mirror finish. • Deep knurling on shafts allows extra grip when spinning off fixings. • Spring-ball socket…

Tungsten carbide tipped boring bit with centre point, two cutting edges and two spurs. Suitable for drilling hinge holes in natural wood and man-made boards (including paper/plastic coated and veneered). Boring bits have a cylindrical shank with flat and length adjusting screw. For use on automatic and point-to-point boring machines. Specifications: • D=25 mm • OL=57.5 mm • Shank Diameter=10x26 mm • L=55.5 mm • Rotation=Left hand

Tungsten carbide tipped boring bit with centre point, two cutting edges and two spurs. Suitable for drilling hinge holes in natural wood and man-made boards (including paper/plastic coated and veneered). Boring bits have a cylindrical shank with flat and length adjusting screw. For use on automatic and point-to-point boring machines. Specifications: • Shank Diameter: 10x26 • Dia Metric: 26 • Overall Length Metric: 57.5 • Type or Grade: LH

A template that enables 60mm and 80mm round and 105mm x55mm rectangular holes, to be routed in desks or any surface where cables need to be hidden. The holes will then accept a plastic cable tidy. The template can also be used to cut a 35mm blind hole for circular kitchen door hinges. A 30mm diameter guide bush and a 12mm diameter cutter are required. A Unibase may be required for certain makes and models of router.

Trend TR30 Trade Shank Mounted Guided Profiler with extra-long shank ideal for trimming and profiling timber, man-made board. Features 2mm micro grain tungsten carbide tips, for cutting the most abrasive materials to give extra-long life. The cutter is PTFE coated, indicated by distinctive black colouring. The guide profiler can be used on hardwood and softwood, fibreboard, plywood and particle board, and has the dimensions etched on the extra-long 40mm shanks, for quick identification. Specifications Shank 1/2in. Cutting Diameter 19.1mm. Cutting Length 50.0mm.

Specially designed tools for aluminium composite cladding material such as Alucobond, Dibond which comprises an aluminium cover with polyethylene core. The v groove cutters rout into the cover and part of the core to allow folding of material by hand. Has a 135 degree included angle with 2mm flat at base and is used to create 45 degree fold. Use at 12000-15000 RPM, feed speed 400 - 600mm/min. depending on thickness and machine (CNC machine or hand). Cooling is not required. Specifications: • Shank Diameter: 1/4 • Dia Metric: 18 • Cut Length Metric: 13 • Overall Length Metric: 57 • Angle: 22.5

Trend Bearing Guided Ovolo & Round Over Cutters are ideal for curved work. They can be used on natural timber, man-made particleboard and fibreboard. Popular uses include edging window frames, glazing bars, cabinets, tabletops, pencil rounds, trophies, shelves and fire surrounds. They can also be used to produce bullnose edge moulds. Supplied with two bearings 9.5mm and 12.7mm diameter. The larger bearing removes the quirk producing a round over profile. This Trend TCT Bearing Guided Ovolo & Round Over has the following specification Radius 6.3mm Diameter 25.4mm Cutter Height 13mm Shank 1/2in Bearings 9.5, 12.7mm

Two Flute Rounding Over Bits To form corner radius to shelves, table tops, etc. With ball bearing guide for curved work.

Three flutes for extra fine finish. Ideal for newel posts and caps for stairs. Supplied with one bearing. Specifications: • Shank Diameter: 1/4 • Dia Metric: 34 • Cut Length Metric: 11 • Overall Length Metric: 50 • Bearing Dia Metric: 12.7 • Bearing Dia Imperial: 1/2 • Angle: 45

Use for bevelling, chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose. Specifications: • Shank Diameter: 1/2 • Dia Metric: 40 • Cut Length Metric: 19 • Overall Length Metric: 71 • Angle: 45

With ball bearing guide. To trim plastic or laminate facings. Used extensively in cabinet making and shop fitting. Suitable for straight or curved work.

Some Ovolo cutters can be used with radius cutters, to make rule joints. Specifications: • Shank Diameter: 1/2 • Dia Metric: 22 • Dia2 Metric: 12 • Cut Length Metric: 12 • Overall Length Metric: 50.1 • Radius 1 Metric: 5

Two flute straight cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, mortising and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood, certain hardwoods and hard plastic. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips.

For coves and part of a rule joint. Specifications: • Shank Diameter: 1/2 • Dia Metric: 16 • Cut Length Metric: 19.5 • Overall Length Metric: 57.5 • Radius 1 Metric: 8

For coves and part of a rule joint. Specifications: • Shank Diameter: 1/4 • Dia Metric: 16 • Cut Length Metric: 19.5 • Overall Length Metric: 51 • Radius 1 Metric: 8

Manufactured from high carbon steel hardened and tempered. Finely ground and polished with honed cutting edges. Supplied in wooden presentation box. Display packed.

Professional Quality, sockets manufactured from chrome vanadium steel hardened, tempered and chrome plated for corrosion protection. Chamfered end allows positive nut location and entry. Hole for driving accessory with locking pin. Some socket sizes have knurled band for extra hand grip. Sold loose.

34 piece 3/8" drive socket set containing metric regular 6 point sockets, a fibre reinforced ratchet handle, 3" and 6" extension bars and an adaptor. The set comes supplied in a plastic case with a snap lock and hinges with metal pins for extended life. (240x125x38mm, 1.12 kilos).Contents: Bits 25mm 1/4" hex: 3mm flat, 4mm flat, 5.5mm flat, 3mm hex, 4mm hex, 5mm hex, 6mm hex, TX10, TX15, TX20, TX25, TX27, TX30, TX40, PH1, PH2, PH3, PZ1, PZ2, PZ3 Regular sockets 3/8" drive 6 point: 8, 10, 11, 12, 13, 14, 15, 17, 19mm Accessories 3/8" drive: FRP ratchet, 3" and 6" extension bars, 1/2"Fx3/8"M adaptor

Professional Quality, sockets manufactured from chrome vanadium steel hardened, tempered and chrome plated for corrosion protection. Chamfered end allows positive nut location and entry. Hole for driving accessory with locking pin. Some socket sizes have knurled band for extra hand grip. Sold loose.