only bits & sockets setsin all categories
only bits & sockets sets
United Kingdom

Bits & Sockets Sets

 prices on 17927 models  
£80
clear
Save List
Show
Use for bevelling, chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose. Specifications: • Shank Diameter: 1/4 • Dia Metric: 27.5 • Dia Imperial: 1 • Cut Length Metric: 13 • Overall Length Metric: 59 • Angle: 45
from £73.95
Compare prices and buy Trend Chamfer V Groove Router Cutter 25.4mm 13mm 1/4" 11/30X1/4TC
Tooled-up.com  →
£74.00
Mytoolshed.co.uk (United Kingdom) →
£74.00
Compare prices2→
Ideal for following templates when panelling and profiling in furniture manufacture. It is advisable that the template is at least 5mm thicker than the cut length of the cutter. Specifications: • Shank Diameter: 1/4 • Dia Metric: 22 • Cut Length Metric: 10 • Overall Length Metric: 51 • Bearing Dia Metric: 22 • Radius 1 Metric: 3.5
from £73.95
Compare prices and buy Trend Classic Panel Bearing Guided Router Cutter 22mm 10mm 1/4" 18/53X1/4T
Tooled-up.com  →
£74.00
Mytoolshed.co.uk (United Kingdom) →
£74.00
Compare prices2→
Shank mounted bearing follows template mounted on board surface. It is advisable that the template is at least 5mm thicker than the cutter. Specifications: • Shank Diameter: 1/4 • Dia Metric: 22 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 52 • Bearing Dia Metric: 22 • Radius 1 Metric: 4 • Radius 2 Metric: 5.5
from £73.95
Compare prices and buy Trend Classic Panel Bearing Guided Router Cutter 22mm 12.7mm 1/4" 18/55X1/
Tooled-up.com  →
£74.00
Mytoolshed.co.uk (United Kingdom) →
£74.00
Compare prices2→
The classic method of producing cabinet panelled door and drawer fronts is made easy with these Profile Scriber sets. With the combination type, components are re-arranged on the arbor to cut the profile or the scribe. Cuts both parts of the joint by reassembly of the tool. Router table use only. 1/4 inch and 8mm shanks should only be used with a medium or heavy duty router. For certain routers the aperture in the base may need to be enlarged. A workholding device should be used when cutting the scribe cut on the rail ends. The cutting edges should be staggered to each other. Specifications: • Shank Diameter: 1/4 • Dia Metric: 41 • Cut Length Metric: 17 • Overall Length …
from £73.95
Compare prices and buy Trend CRAFTPRO Bearing Guided Combination Ogee Router Cutter 41mm 17mm 1/4
Tooled-up.com  →
£74.00
Mytoolshed.co.uk (United Kingdom) →
£74.00
Compare prices2→
The classic method of producing cabinet panelled door and drawer fronts is made easy with these Profile Scriber sets. With the combination type, components are re-arranged on the arbor to cut the profile or the scribe. Cuts both parts of the joint by reassembly of the tool. Router table use only. 1/4 inch and 8mm shanks should only be used with a medium or heavy duty router. For certain routers the aperture in the base may need to be enlarged. A workholding device should be used when cutting the scribe cut on the rail ends. The cutting edges should be staggered to each other. Specifications: • Shank Diameter: 1/4 • Dia Metric: 41 • Cut Length Metric: 17 • Overall Length …
from £73.95
Compare prices and buy Trend CRAFTPRO Bearing Guided Combination Raised Bevel Router Cutter 41mm
Tooled-up.com  →
£74.00
Mytoolshed.co.uk (United Kingdom) →
£74.00
Compare prices2→
You may be interested in
The classic method of producing cabinet panelled door and drawer fronts is made easy with these Profile Scriber sets. With the combination type, components are re-arranged on the arbor to cut the profile or the scribe. Cuts both parts of the joint by reassembly of the tool. Router table use only. 1/4 inch and 8mm shanks should only be used with a medium or heavy duty router. For certain routers the aperture in the base may need to be enlarged. A workholding device should be used when cutting the scribe cut on the rail ends. The cutting edges should be staggered to each other. Specifications: • Shank Diameter: 1/2 • Dia Metric: 41 • Cut Length Metric: 17 • Overall Length …
from £73.95
Compare prices and buy Trend CRAFTPRO Bearing Guided Combination Ogee Router Cutter 41mm 17mm 1/2
Tooled-up.com  →
£74.00
Mytoolshed.co.uk (United Kingdom) →
£74.00
Compare prices2→
The classic method of producing cabinet panelled door and drawer fronts is made easy with these Profile Scriber sets. With the combination type, components are re-arranged on the arbor to cut the profile or the scribe. Cuts both parts of the joint by reassembly of the tool. Router table use only. 1/4 inch and 8mm shanks should only be used with a medium or heavy duty router. For certain routers the aperture in the base may need to be enlarged. A workholding device should be used when cutting the scribe cut on the rail ends. The cutting edges should be staggered to each other. Specifications: • Shank Diameter: 1/2 • Dia Metric: 41 • Cut Length Metric: 17 • Overall Length …
from £73.95
Compare prices and buy Trend CRAFTPRO Bearing Guided Combination Raised Bevel Router Cutter 41mm
Tooled-up.com  →
£74.00
Mytoolshed.co.uk (United Kingdom) →
£74.00
Compare prices2→
The classic method of producing cabinet panelled door and drawer fronts is made easy with these Profile Scriber sets. With the combination type, components are re-arranged on the arbor to cut the profile or the scribe. Cuts both parts of the joint by reassembly of the tool. Router table use only. 1/4 inch and 8mm shanks should only be used with a medium or heavy duty router. For certain routers the aperture in the base may need to be enlarged. A workholding device should be used when cutting the scribe cut on the rail ends. The cutting edges should be staggered to each other. Specifications: • Shank Diameter: 8 mm • Dia Metric: 41 • Cut Length Metric: 17 • Overall Length …
from £73.95
Compare prices and buy Trend CRAFTPRO Bearing Guided Flat Classic Router Cutter 41mm 17mm 8mm C15
Tooled-up.com  →
£74.00
Mytoolshed.co.uk (United Kingdom) →
£74.00
Compare prices2→
The classic method of producing cabinet panelled door and drawer fronts is made easy with these Profile Scriber sets. With the combination type, components are re-arranged on the arbor to cut the profile or the scribe. Cuts both parts of the joint by reassembly of the tool. Router table use only. 1/4 inch and 8mm shanks should only be used with a medium or heavy duty router. For certain routers the aperture in the base may need to be enlarged. A workholding device should be used when cutting the scribe cut on the rail ends. The cutting edges should be staggered to each other. Specifications: • Shank Diameter: 1/2 • Dia Metric: 41 • Cut Length Metric: 17 • Overall Length …
from £73.95
Compare prices and buy Trend CRAFTPRO Bearing Guided Flat Classic Router Cutter 41mm 17mm 1/2" C1
Tooled-up.com  →
£74.00
Mytoolshed.co.uk (United Kingdom) →
£74.00
Compare prices2→
TCT cutter with staggered cutting surfaces. Deep mortising and grooving giving good chip clearance. For lock mortising, two width cuts will be needed to achieve the standard 19mm mortise. Specifications: • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 50 • Overall Length Metric: 108
from £73.95
Compare prices and buy Trend Mortise Router Cutter 12.7mm 50mm 1/2" 5/52X1/2TC
Tooled-up.com  →
£74.00
Mytoolshed.co.uk (United Kingdom) →
£74.00
Compare prices2→
Some Ovolo cutters can be used with radius cutters, to make rule joints. Specifications: • Shank Diameter: 1/2 • Dia Metric: 28 • Cut Length Metric: 15 • Overall Length Metric: 68 • Radius 1 Metric: 8
from £73.95
Compare prices and buy Trend Ovolo Rounding Over Router Cutter 28mm 15mm 1/2" 7/4X1/2TC
Tooled-up.com  →
£74.00
Mytoolshed.co.uk (United Kingdom) →
£74.00
Compare prices2→
Two flute straight plunging bits General-purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.
from £42.99 up to £79.99 
Compare prices and buy Trend 4/24 1/2" TC 2FL 16.0mm Straight Cutter
Zoro.co.uk (United Kingdom) →
£43.00
Tooled-up.com  →
£74.00
Mytoolshed.co.uk (United Kingdom) →
£74.00
Zoro.co.uk (United Kingdom) →
£80.00
Compare prices4→
All articles about bits / sockets
Screwdrivers and drills for dummies
What is the best screwdriver?
Sparks, smoke, crunch and burning smell: what can break in a drill or screwdriver
What to give to a motorist?
Two flute straight cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, mortising and drilling. Use Tungsten Carbide tooling when working with abrasive materials such as chipboard, MDF, plywood, certain hardwoods and hard plastic. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips.
from £61.99 up to £79.99 
Compare prices and buy Trend 4/80 1/2" TC Two Flute Straight Cutter with TCT Plunge Centre TIP.25
Zoro.co.uk (United Kingdom) →
£62.00
Tooled-up.com  →
£74.00
Mytoolshed.co.uk (United Kingdom) →
£74.00
Zoro.co.uk (United Kingdom) →
£80.00
Compare prices4→
Purpose made for stair housing jigs. Ensures tight fit of tread in string. Specifications: • Shank Diameter: 1/2 • Dia Metric: 19 • Dia Imperial: 3/4 • Cut Length Metric: 25.5 • Cut Length Imperial: 1 • Overall Length Metric: 65 • Type or Grade: RH • Angle: 95
from £73.95
Compare prices and buy Trend Stair Housing Dovetail Right Hand Rotation Router Cutter 19mm 25.5mm
Tooled-up.com  →
£74.00
Mytoolshed.co.uk (United Kingdom) →
£74.00
Compare prices2→
Purpose made for stair housing jigs. Ensures tight fit of tread in string. Specifications: • Shank Diameter: 1/2 • Dia Metric: 22 • Dia Imperial: 7/8 • Cut Length Metric: 26 • Cut Length Imperial: 1 • Overall Length Metric: 65 • Type or Grade: RH • Angle: 95
from £73.95
Compare prices and buy Trend Stair Housing Dovetail Right Hand Rotation Router Cutter 22mm 25.5mm
Tooled-up.com  →
£74.00
Mytoolshed.co.uk (United Kingdom) →
£74.00
Compare prices2→
These machine bits are typically used by kitchen furniture manufacturers for recessing circular hinges. This type with scribers is used on veneered and wood finishes. Use with pillar drills only. Specifications: • Shank Diameter: 1/4 • Dia Metric: 35 • Dia Imperial: 1 3/8 • Overall Length Metric: 65 • Type or Grade: TCT
from £73.95
Compare prices and buy Trend TCT Hinge Sinking Router Bit 35mm 1/4" 104/35X1/4TC
Tooled-up.com  →
£74.00
Mytoolshed.co.uk (United Kingdom) →
£74.00
Compare prices2→
Especially designed bevel cutter for routing Corian and similar luxury 'marble like, material which is used in many bathrooms and kitchens. Specifications: • Shank Diameter: 1/2 • Dia Metric: 24 • Cut Length Metric: 25 • Overall Length Metric: 65 • Angle: 75
from £73.95
Compare prices and buy Trend Undermount Bowl Bevel Router Cutter 24mm 25mm 1/2" 10/22X1/2TC
Tooled-up.com  →
£74.00
Mytoolshed.co.uk (United Kingdom) →
£74.00
Compare prices2→
The CorePlus Diamond Dry Core Drill Bit delivers a smooth drilling experience. Its 8mm diamond segments feature a high concentration of premium-grade diamond in the bond utilising leading edge diamond/metal bonding metallurgy for long-lasting core life. A ribbed core body and V-groove segments enable the fast clearing of debris allowing for a continuous fast cutting action while the aerated core design enhances cooling and extends core life. 1/2in BSP threaded compatible with standard core drilling machines and accessories. Please Note: 22mm and 28mm have a 10mm Hex Shank and do not require an arbor accessory.1 x CorePlus DCD152 Diamond Dry Core Drill Bit 152mm.PTDCORDCD152
£73.74
PowerToolsDirect.com
Delivery: in United Kingdom
Report
Buy!
PowerToolsDirect.com
For coves and part of a rule joint. 1/2" shank diameter. D 16 mm C 19.5 mm R 5/16 inch R 8 mm OL 57.5 mm
£73.73
MachineMart.co.uk
Delivery: to United Kingdom
Report
Buy!
MachineMart.co.uk
For trimming and profiling timber man-made board. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life. D 3/4 inch D 19.1 mm C 50 mm Overall length 95 mm Shank Diameter 1/2 inch
£73.73
MachineMart.co.uk
Delivery: to United Kingdom
Report
Buy!
MachineMart.co.uk
Universal Dry Core For Drilling Large Clean Holes In Most Building Materials Including Semi-Engineering Bricks Clay Products And Limestone.PTDTIMGPCP78150
£73.62
PowerToolsDirect.com
Delivery: in United Kingdom
Report
Buy!
PowerToolsDirect.com
Helical drill case 1-10mm hss 4241 black.Hss 4241 1-10 mm helical drill case.Electric tool accessories.
£73.49
BricoINN
Delivery: in United Kingdom
Report
Buy!
BricoINN
Reisser SPEEDSTER 2-Cutter SDS-plus hammer drill for concrete and hard aggregates For electric hammers utilising the SDS-plus tool holder system. SDS-plus 2-Cutter Speedster Hammer Drill Bit22.0mm DiameterOverall length: 1000mmPTDREIR110221000
£73.49
PowerToolsDirect.com
Delivery: in United Kingdom
Report
Buy!
PowerToolsDirect.com
Sliding T-Bar 2 X Extension Bars: 100 And 200Mm And 495Mm Quick-Release Ratchet Handle. Sockets: 19 22 24 26 27 28 30 32 34 36 38 41 42 45 46 48 And 50Mm. Supplied In Carry Case.PTDTST633663
£73.45
PowerToolsDirect.com
Delivery: in United Kingdom
Report
Buy!
PowerToolsDirect.com
24 more item(s)
1 ... 8 9 10 11 12 ... 747
Filters
Price
from£ up to£ 
Brands
Set
Items in set
Landing square
Bits included
Socket heads included
More features
Bit length
Socket depth
Got ideas or questions about filters? Click here!
Models