Bits & Sockets Sets

The Wiha Collector Standard Bit Set 61 Piece for both machine and hand operation. The robust Collector box is made from high-tensile plastic. The box opens automatically at the press of a button.Bits conform to DIN 3126, ISO 1173, Style C6,3. This 61 Piece Set contains the following: 4 x 25mm Standard Slotted Bits: 4.5, 5.5, 6.5 & 8.0mm. 23 x 25mm Standard Phillips Bits: PH1(x7), PH2(x13) & PH3 (x3). 23 x 25mm Standard Pozidriv Bits: PZ1(x7), PZ2(x13) & PZ3 (x3). 6 x 25mm Standard TORX® Bits: T10, T15, T20, T25, T30 & T40. 4 x 25mm Standard Hexagon Bits: 3.0, 4.0, 5.0 & 6.0mm. 1 x Magnetic CentroFix Force Mechanically Lockable Bit Holder 60mm.

Chrome-vanadium-molybdenum steel
Adjustable blade lengths
Robust roll-up pouches allow space-saving storage of tools

Professional Quality, manufactured from chrome vanadium steel hardened, tempered and chrome plated for corrosion protection. Chamfered end allows positive nut location and entry. Hole for driving accessory with locking pin. Sold loose.

Trend Joinery 3 degree undercut router bit with shank mounted bearing guide. Ideal for routing a leading edge on doors to allow a tight fit against jamb. PTFE coating to minimise heat and resin build up for increased cutter performance and longevity.

A basic no-nonsense 12 piece 1/2" drive set of sockets with an FRP ratchet and an extension bar. The set is supplied in a clip box which stores the sockets and includes a clip rail facility for adding extra sockets. Contents: FRP Ratchet & 5" Extension Bar. Sockets: 8, 10, 12, 13, 14, 15, 17, 18, 19 & 24mm

Lasts up to 3x longer than a standard drill bitDrilling through reinforced concrete is a tough job and it has traditionally taken its toll on hammer drill bits. Even 4-cutters wear out fast, resulting in downtime changing accessories and fetching supplies. The Full Carbide Head on the Expert SDS max-8x is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact.Thanks to Bosch Carbide Technology and the Full Carbide Head, the Expert SDS max-8x lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel.For construction professionals dr…

With a variety of accessories to perform the most common applications, Stanley drill & screwdriver bit sets offer dependable performance to get the job done. The cases are designed to maintain the diferent accessories and keep them within easy reach. Features & Benefits • Masonry drill bits for drilling into bricks and masonry • HSS TiN drill bits for general purpose drilling in soft steel and non-ferrous metal • Brad point drill bits for clean, accurate holes in wood • Nut drivers for hexagonal fasteners • Large selection of 25mm and 50mm screwdriver bits • Magnetic screwdriver bit holder • Countersink for countersinking screws flush with the material surface …

NK.A 3/4" drive impact extensions. For your safety, use impact extensions and accessories with the appropriate rings and pins. Specifications • Drive: 3/4" • Size: 252mm

Trend Letter Templates - 4 Piece Set The ideal routing accessory for making consistent, high quality name plates using a cutter and guide bush. Working conjunction with a 13mm guide bush and cutter the template is fast and easy to use to make impressive, bold and easy to read signs. Clear acrylic design allows easy and fast setup, and full line of sight when routing. Routed letters are uppercase, 57mm high for easy visibility and ideal for many applications including house signs, directional signs and more. Compatible with the Trend TEMP/LN57X1/4 set for flat bottomed 8mm wide letters.

Two Flute Rounding Over Bits To form corner radius to shelves, table tops, etc. With ball bearing guide for curved work.

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Specifications: • Shank Diameter: 1/2 • Dia Metric: 44.5 • Dia Imperial: 1 3/4 • Cut Length Metric: 25 • Cut Length Imperial: 1 • Overall Length Metric: 63

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Specifications: • Shank Diameter: 1/2 • Dia Metric: 47.6 • Dia Imperial: 1 7/8 • Cut Length Metric: 25 • Cut Length Imperial: 1 • Overall Length Metric: 63

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Diameter: 1/2 • Dia Metric: 14 • Dia Imperial: 35/64 • Cut Length Metric: 50 • Overall Length Metric: 95