Bits & Sockets Sets

• Three high-speed HSS M2 spiral flute step drills.• Double spiral flutes for efficient swarf clearance.• Allows clog-free, precision drilling of 18 different size holes with just three bits.• Size #1: ø4-12mm.• Size #2: ø4-22mm in 2mm increments.• Size #3: ø4-30mm in 2mm increments.• Supplied in flip-up metal case.Three high-speed HSS M2 spiral flute step drills. Double spiral flutes for efficient swarf clearance. Allows clog-free, precision drilling of 18 different size holes with just three bits. Supplied in flip-up metal case.• Three high-speed HSS M2 spiral flute step drills. • Double spiral flutes for efficient swarf clearance. • Allows clog-free, precision drilling of 18 diffe…

• Superior quality SDS MAX drill bit suitable for a variety of applications.• Drills are fully hardened and ground.Superior quality SDS MAX drill bit suitable for a variety of applications. Drills are fully hardened and ground.Technical Specification:Size: ø40 x 920mmWeight: 4.44KgWarranty: Consumable

Creates a corner bead with a step. By making a second pass at 90 degrees a full corner bead can be cut. Two flutes give a clean finish to cut edges. Specifications: • Shank Diameter: 1/2 • Dia Metric: 28 • Dia2 Metric: 25.7 • Cut Length Metric: 17 • Overall Length Metric: 66.5 • Bearing Dia Metric: 16 • Bearing Dia Imperial: 5/8 • Radius 1 Metric: 4.8

Bead Cutters are ideally suited to form straight or curved decorative edge mouldings on table tops, chair legs and frames. They can also be used to produce complete round over profiles for window boards and stair tread nosings. Cutters can be combined to form compounded one-off mouldings for individual applications. Tooling T.C.T. 1/4in Shank. R = 4.8 mm D = 28 mm d = 25.7 mm B = 16 mm

The two bearings supplied offer the means of cutting different depths of mouldings. Specifications: • Shank Diameter: 1/2 • Dia Metric: 34.9 • Cut Length Metric: 16 • Overall Length Metric: 64 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 12.7

The two bearings supplied offer the means of cutting different depths of mouldings. Specifications: • Shank Diameter: 1/4 • Dia Metric: 34.9 • Cut Length Metric: 16 • Overall Length Metric: 55 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 12.7

Two Flute Cutter for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips.

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Diameter: 1/2 • Dia Metric: 19.1 • Dia Imperial: 3/4 • Cut Length Metric: 63 • Overall Length Metric: 105

These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut. Specifications: • Dia Metric: 50 • Sawbore: M12 • Saw Kerf Metric: 5 • Saw Teeth: 4

These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut. Specifications: • Dia Metric: 50 • Sawbore: M12 • Saw Kerf Metric: 6 • Saw Teeth: 4

• One of a comprehensive range of Premier Hand Tools, suitable for daily professional use.• Platinum series.• High quality S2 steel bits with a zinc phosphate finish, each size in 30 and 75mm lengths.• Hardened (58-62 HRC) and tempered for added strength.• Includes 3/8" and 1/2"Sq drive to 10mm hex Chrome Vanadium steel bit adaptors.• Contents: TRX-Star* Bits; T20, T25, T30, T40, T45, T50, T55, T60 (1 each 30 and 75mm), Security TRX-Star* Bits; T20H, T25H, T30H, T40H, T45H, T50H, T55H, T60H (1 each 30 and 75mm), Hex Bits; 4, 5, 6, 7, 8, 10, 12mm (1 each 30 and 75mm), Ribe Bits; M5, M6, M7, M8, M9, M10, M12, M14 (1 each 30 and 75mm), Spline Bits; M5, M6, M8, M10, M12 (1 each 30 and 75mm), Drive…

1/2" square drive digital torque adaptor supplied with calibration certificate The Sealey STW290 is designed for use with a standard ratchet or breaker bar, ideal for tightening wheel nuts to factory specifications. This model has a 1/2" square drive and a range of 40-200Nm. The large LCD display with LED/audible alarm indicates achieved and target torque levels. Features:  
- Designed for use with a standard ratchet or breaker bar 
- Ideal for work around the engine bay and the tightening of wheel nuts to factory specifications 
- Large LCD display with LED/audible alarm indicating achieved and target torque levels 
- Selectable readings in Nm, lb.ft, lb.in, kg.cm or kg.m and accur…

Square drive acc. to DIN 3120 - C 12.5, ISO 1174, with ball retention groove Screwdriver bit socket 1/2", TX, with pressed-in, phosphated pin, non-slip knurled head, brightly polished on the drive side Chrome-vanadium steel, matt satin chrome-plated For hand-operated screw work Plastic case in the GEDORE red Design Clamp-secured tools Metal hinges/lock

Lasts up to 3x longer than a standard drill bitDrilling through reinforced concrete is a tough job and it has traditionally taken its toll on hammer drill bits. Even 4-cutters wear out fast, resulting in downtime changing accessories and fetching supplies. The Full Carbide Head on the Expert SDS max-8x is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact.Thanks to Bosch Carbide Technology and the Full Carbide Head, the Expert SDS max-8x lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel.For construction professionals dr…

Dormer 5-piece set HM Bevel milling, ST toothing Specifications: P703 9.6 x 6.0 • Rotary Burr - Cylinder with Endcut • 6mm round shank • Diameter: 9.6mm P705 9.6 x 6.0; • Ball Nosed Cylinder Cut • 6mm round shank • Diameter: 9.6mm P707 9.6 x 6.0; • Rotary Burr - Ball Cut • 6mm round shank • Diameter: 9.6mm P711 9.6 x 6.0 • Ball Nosed Tree Cut • 6mm round shank • Diameter: 9.6mm P721 10.0 x 6.0 • Ball Nosed Cone Cut • 6mm round shank • Diameter: 10mmFeatures & Benefits• ST geometry specifically designed to maximise metal removal rate when machining steel • Special brazing elements provide excellent braze strength,…

The Facom 1/2" Drive Non-Sparking Bi Hexagon Socket Metric is designed for maximum safety and performance in hazardous environments. Ideal for use in industries such as oil and gas, chemical processing, and mining, this socket is crafted from high-quality copper beryllium alloy, ensuring it is non-sparking and safe for use in explosive atmospheres. With its bi-hexagon (12-point) design, this metric socket provides a secure grip on fasteners, reducing the risk of rounding and ensuring efficient torque transfer. The 1/2" drive size is compatible with a wide range of ratchets and torque wrenches, offering versatility and ease of use in various applications. The corrosion-resistant finish enhances …

Facom M.A series 1" drive extensions. Features & Benefits • Safety plunger lock • Satin chrome finish Specifications • Drive: 1” • Size: 400mm

Constructed from high-quality materials, the Facom SV.J5 socket head bits offer exceptional strength and longevity, ensuring reliable performance even under heavy use. The XZN spline design provides a secure grip on fasteners, minimising the risk of slippage and damage during operation. With five different sizes included in the set, you'll have the versatility to tackle various jobs with confidence. From removing stubborn bolts to assembling intricate machinery, these socket head bits are up to the task. Features & Benefits • Supplied on a rack Specifications • Drive: 1/2" Square • Bit Length: 4mm • Total Weight: 670g Contents • SV.14LB Socket Bit • SV.12LB Socket …