Bits & Sockets Sets

Easy wipe clean material and comfortable feel
Drive: Hexagon, Solid 6.3mm (1/4") Output: Slot Profile (Negative), Cross-Recessed Profile (Plus) PH, Posi-Drive Profile PZ, Inner Hex Profile, Inn more→er TORX Profile, Tamper Proof TORX Profile. Wrench Size: ♍ 1,5-6 Ý 0,5 x 4-1,2 x 6,5 Ý PH1-PH3 PZ1 - PZ3 T6-T40 Dimensions/Length: 130mm x 118mm x 50mm
[Set Contents] 1 x HAZET Smart Case Bit Set 2200SC-1|69 Pieces, Manual Operation, Drill and Cordless Driver Adapter, Various Bits in Compact Case | Length: 5.1 x 4.6 x 2.0 inches (130 x 118 x 50 mm)

Silverline Socket Set 3/4" Drive Metric 21pce 633663

79.62Buy!
£

Toolbee.co.uk

Delivery: in United Kingdom

Report

Sliding T-bar, 2 x extension bars: 100 and 200mm, and 495mm quick-release ratchet handle. Sockets: 19, 22, 24, 26, 27, 28, 30, 32, 34, 36, 38, 41, 42, 45, 46, 48 and 50mm. Supplied in carry case.

Reisser 139678 Zentro Sds-Max Hammer Drill Bit 30.0 X 370Mm

79.56Buy!
£

PowerToolsDirect.com

Delivery: in United Kingdom

Report

Reisser ZENTRO 4-Cutter SDS-max hammer drill for reinforced concrete and hard aggregates For electric hammers utilising the SDS-max tool holder system. SDS-max 4-Cutter Hammer Drill Bit30.0mm Diameter more→Overall length: 370mmPTDREI139678

Bosch Expert 7X 4-Cutter Head 3X Life SDS Plus Masonry 10mm 265m

from £68.18 up to £99.95

Compare prices₆→

Lasts up to 3x longer than a standard drill bitDrilling through reinforced concrete is a tough job, and it has traditionally taken its toll on drill bits. Regular two-cutter bits get stuck in rebar an more→d they eventually break. The Full Carbide Head on the Expert SDS plus-7X is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact.Thanks to Bosch Carbide Technology and the Full Carbide Head, the Expert SDS plus-7X lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel.For construction professionals drilling concrete an…

Bosch 25 Piece HSS-TiN Set 2608587019

from £77.55 up to £99.95

Compare prices₇→

The HSS Twist Drill Bit Titanium offers maximum lifetime while drilling holes in metal. When using the appropriate cooling system, the drill bit has the lowest possible level of friction and minimal w more→ear, due to its titanium-nitride coating. The high surface quality of this ground twist drill bit, which is made from HSS (high-speed steel), allows for extended usage. It is suitable for use on alloyed and non-alloyed steel, malleable cast iron, sintered iron, new silver, copper, bronze and hard plastics such as perspex. The HSS Twist Drill Bit Titanium is manufactured to DIN 338. The drill bit is Type N (flute angle) with a 135-degree tip and a diameter tolerance of h8. Active cutting and perfect …

Bosch Sds Max-7: 30x400x520 Mm Wall Drill Silver 2608586790

from £68.99 up to £79.49

Compare prices₂→

DS max-7:30 x 400 x 520.Bosch Accessories.Product net weight (kg):1,248.Electric tool accessories.

JBM 52550

79.49Buy!
£

BricoINN

Report

compare

bits 72 pcs, T, TH, H, M, length 30, 75 mm, in box: adapter

Beta Tools 728 3/4" Square Drive Standard Impact Socket 55mm | 007280055

79.47Buy!
£

Toolbee.co.uk

Delivery: in United Kingdom

Report

Impact sockets, standard series.tg {border-collapse:collapse;border-spacing:0;}.tg td{font-family:Arial, sans-serif;font-size:14px;padding:10px 5px;border-style:solid;border-width:1px;overflow:hidden; more→word-break:normal;border-color:black;}.tg th{font-family:Arial, sans-serif;font-size:14px;font-weight:normal;padding:10px 5px;border-style:solid;border-width:1px;overflow:hidden;word-break:normal;border-color:black;}.tg .tg-s268{text-align:left}.tg .tg-0lax{text-align:left;vertical-align:top} Product Code Part Number Key dimensions L 1 A Weight mm mm mm mm mm g 007280017 728 17 17 30 51 44 14 378 007280018 728 18 18 31 51 44 14 377 007280019 728 19 19 32.5 51 44 14 381 007280021 728 21 21 35 51 …

Beta Tools 728L 3/4" Square Drive Long/Deep Impact Socket 46mm | 007280346

79.47Buy!
£

Toolbee.co.uk

Delivery: in United Kingdom

Report

Impact sockets, long series.tg {border-collapse:collapse;border-spacing:0;}.tg td{font-family:Arial, sans-serif;font-size:14px;padding:10px 5px;border-style:solid;border-width:1px;overflow:hidden;word more→-break:normal;border-color:black;}.tg th{font-family:Arial, sans-serif;font-size:14px;font-weight:normal;padding:10px 5px;border-style:solid;border-width:1px;overflow:hidden;word-break:normal;border-color:black;}.tg .tg-s268{text-align:left}.tg .tg-0lax{text-align:left;vertical-align:top} Product Code Part Number Key dimensions L 1 A mm mm mm mm mm 007280319 728L 19 19 32.5 90 44 26 656 007280321 728L 21 21 35 90 44 26 679 007280322 728L 22 22 36 90 44 26 689 007280324 728L 24 24 38.5 90 44 26 691 …

Beta Tools 728L 44 3/4" Square Drive Long/Deep Impact Socket 44mm 00728034

79.47Buy!
£

Toolbee.co.uk

Delivery: in United Kingdom

Report

Hexagon impact sockets, 3/4" female drive, long series, phosphatized

Draper Expert 63490

from £79.42 up to £117.94

Compare prices₇→

compare

Expert impact

bits 19 pcs, T, H, length over 70 mm, socket heads 9 pcs, Torx, ударные / торсионные

Trend Trend 32/10X1/2TC Stair Trenching Cutter 1/2" Shank

79.30Buy!
£

MachineMart.co.uk

Delivery: to United Kingdom

Report

Purpose made for stair housing jigs. Ensures tight fit of tread in string. D 14 mm C 20 mm OL 65 mm A 95 degrees

Laser Tools 8349 52pc Master Torx Socket & Bit Set

79.29Buy!
£

Toolbee.co.uk

Delivery: in United Kingdom

Report

A comprehensive Torx and Torx Plus socket and bit set, including Torx, Torx Plus and Torx tamperproof bit and socket profiles in 1/4", 3/8" and 1/2" drive sizes. A quality set manufactured from chrome more→vanadium and impact grade S2 steel which is supplied in a sturdy blow-mold case to keep the sockets organised.Includes Torx, Torx tamperproof bits, Torx Plus (6 point) bits and Torx sockets.Torx bits - 1/4"D x 37mm long: T6, T8, T10, T15, T20, T25, T27 and T30; 3/8"D x 48mm long: T40, T45, T47, T50 and T55; 1/2"D x 55mm long: T60 and T70.Torx tamperproof bits - 1/4"D x 37mm long: T8H, T10H, T15H, T20H, T25H, T27H, T30H; 3/8"D x 48mm long: T40H, T45H, T50H and T55H, 1/2"D x 55mm long: T60H.Torx …

Sealey ABS Rotor Socket 3/4"Sq Drive - Jaguar

79.15Buy!
£

Electricalworld.com

Delivery: in United Kingdom

Report

• Specialised socket designed to remove the ABS rotor ring prior to wheel bearing replacement.• Specifically engineered to cope with the high torque settings required to remove/refit the rotor ring.• more→Suitable for XJ8 (97-03), XK8 (96on)Specialised socket designed to remove the ABS rotor ring prior to wheel bearing replacement. Specifically engineered to cope with the high torque settings required to remove/refit the rotor ring. Suitable for XJ8 (97-03), XK8 (96on).• Specialised socket designed to remove the ABS rotor ring prior to wheel bearing replacement. • Specifically engineered to cope with the high torque settings required to remove/refit the rotor ring. • Suitable for XJ8 (97-03), XK8…

Bosch Expert SDS MAX 8X Concrete 4 Cutter Carbide Head SDS Max 1

from £78.99 up to £86.95

Compare prices₆→

Lasts up to 3x longer than a standard drill bitDrilling through reinforced concrete is a tough job and it has traditionally taken its toll on hammer drill bits. Even 4-cutters wear out fast, resulting more→in downtime changing accessories and fetching supplies. The Full Carbide Head on the Expert SDS max-8x is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact.Thanks to Bosch Carbide Technology and the Full Carbide Head, the Expert SDS max-8x lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel.For construction professionals dr…

Wera WE-135918

from £78.99 up to £93.95

Compare prices₄→

compare

bits 14 pcs, PH, PZ, T, H, length 25 mm, socket heads 9 pcs, 6-points, in box: adapter, ratchet wrench

Facom Expert by Facom 1" Drive T Handle

78.98Buy!
£

MachineMart.co.uk

Delivery: to United Kingdom

Report

A 1" drive T handle from the Expert by Facom range, a world leading brand in hand tools which are designed to meet the needs of Industrial and Automotive professionals.

FACOM 1" Drive Hexagon Impact Socket 1" 50mm NM.50A

from £78.95

Compare prices₄→

Facom 1" drive metric six-point sockets. For your safety, use impact sockets with the appropriate rings and pins. Specifications • Drive: 1” • Size: 50mm

FACOM 3/4" Drive Deep Hexagon Impact Socket Metric 3/4" 46mm NK.46LA

from £78.95

Compare prices₄→

Crafted with precision from high-quality materials, this socket delivers exceptional strength and durability to withstand the rigors of professional use in numerous environments. The 3/4" drive size o more→f the socket offers compatibility with a wide range of impact wrenches, providing versatility and flexibility in use across various projects. Featuring a deep hexagon design, these sockets provide ample clearance for accessing recessed fasteners with ease. Its impact-resistant construction ensures reliable performance under high torque conditions, making it suitable for demanding tasks such as fastening or loosening stubborn bolts and nuts. For your safety, always use impact sockets and accessories …

FACOM 1/4" Drive AXS Extension Wrench 1/4" AXS.S

from £78.95

Compare prices₄→

The 1/4" drive of the AXS Extension Wrench provides the additional reach needed for accessing tight spaces and intricate components. Crafted with meticulous attention to detail, this extension wrench more→is made from high-quality materials, ensuring durability and consistent performance in various work settings. The carefully crafted shape ensures efficient use, enabling you to navigate challenging angles with confidence. Features & Benefits • High Access - Designed to swerve the tightening • High Speed – Strongly designed to be used with a power tool • One side is bigger than the other, which allows the user to drive more strength

Sealey 11 Piece 3/8" Drive Bolt Extractor Socket Set Metric 3/8" AK7281

from £78.95 up to £85.85

Compare prices₅→

Drop-forged Chrome Molybdenum steel sockets with a satin finish. Innovative design provides maximum gripping power for the removal of damaged fasteners. Supplied in storage case. Features & Benefits: more→• Drop-forged Chrome Molybdenum steel sockets with a satin finish. • Innovative design provides maximum gripping power for the removal of damaged fasteners. • Sizes: 8-19mm. • Supplied in storage case. • Lifetime guarantee*. • Model No. AK7281 Specifications: Model No AK7281 Brand: Premier Contents: 8, 9, 10, 11, 12, 13, 14, 15, 16, 17, 19mm Nett Weight: 0.75kg

Trend KFP Kitchen Fitters Worktop Cutters KFP/1

from £78.95

Compare prices₄→

Trend Kitchen Fitters Pack - 3 X 50mm x 12.7mm worktop cutters 12.7mm diameter X 50mm cutting depth; the essential cutter for routing post formed joints with worktop jigs in tops up to 40mm thick. C more→ut crisp and clean precision fit joints every time; especially suited for use on abrasive chipboard core laminate faced worktops. Bottom cut feature for plunge work including stopped grooving and morticing applications. Supplied in plastic storage case for protection when not in use. 1/2in shank for use in bigger routers and heavier applications with 'K'mark shank to ensure safe working practices. Specifications: • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • …

Trend Bearing Guided Dual Bead Router Cutter 22mm 19mm 1/4" 9/80X1/4TC

from £78.95

Compare prices₄→

Can be used to make single, double or corner beads. Specifications: • Shank Diameter: 1/4 • Dia Metric: 22 • Cut Length Metric: 19 • Overall Length Metric: 59.3 • Bearing Dia more→Metric: 16 • Radius 1 Metric: 3

Trend Bearing Guided Ovolo and Round Router Cutter 34.9mm 18mm 1/2" 46/145

from £78.95

Compare prices₄→

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can more→be produced. A full round/bullnose for stair treads can also be produced by taking a second pass from the opposite side of the workpiece. Specifications: • Shank Diameter: 1/2 • Dia Metric: 34.9 • Cut Length Metric: 18 • Overall Length Metric: 66 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 11.1 • Radius 1 Imperial: 7/16

24 more item(s)