Bits & Sockets Sets

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can more→be produced. A full round/bullnose for stair treads can also be produced by taking a second pass from the opposite side of the workpiece. Specifications: • Shank Diameter: 1/4 • Dia Metric: 34.9 • Cut Length Metric: 18 • Overall Length Metric: 57 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 11.1 • Radius 1 Imperial: 7/16

To adjust the groove width these tools can be re-assembled with the supplied shims and spacers inserted between the groovers, giving a 0.1mm increment in thickness. Specifications: • Shank Diame more→ter: 1/2 • Dia Metric: 50 • Dia Imperial: 1 31/32 • Cut Length Metric: 03-May • Overall Length Metric: 76 • Bearing Dia Metric: 28 • Rebate Metric: 11

This quarter radius can produce a sunk bead or a nosing mould. The bearing eases setting up & enables curved edges to be profiled. Specifications: • Shank Diameter: 1/4 • Dia Metric: 22 &bu more→ll; Cut Length Metric: 16 • Overall Length Metric: 60 • Bearing Dia Metric: 16 • Radius 1 Metric: 10

Side profile for an attractive handrail. Can be used in conjunction with C191. to produce the handrail top. Specifications: • Shank Diameter: 1/2 • Dia Metric: 32 • Cut Length Metri more→c: 38 • Overall Length Metric: 86.5 • Bearing Dia Metric: 16 • Radius 1 Metric: 9.5 • Radius 2 Metric: 12.5

Classic skirting board mould. Specifications: • Shank Diameter: 1/2 • Dia Metric: 37 • Cut Length Metric: 40 • Overall Length Metric: 88.5 • Bearing Dia Metric: 16 • Ra more→dius 1 Metric: 13.5

A quarter ellipse cutter for architraves and mould finishes. For stationary machines - 12000 RPM recommended speed. Specifications: • Shank Diameter: 1/2 • Dia Metric: 69.2 • Cut Leng more→th Metric: 16 • Overall Length Metric: 78.5 • Bearing Dia Metric: 12.7 • Radius 1 Metric: 44

Panel raiser cutters for producing the panel for cabinet panelled doors, tool matches our range of profile scribers. Suitable for use on natural timber and MDF. For use in a router table only. Take more→several passes, increasing the depth with each pass. Must be used in a stationary variable speed router either mounted overhead or inverted in a router table at a reduced speed. For use on natural timber and MDF. Stationary use only. Specifications: • Shank Diameter: 1/2 • Dia Metric: 67 • Cut Length Metric: 16 • Cut Length Imperial: 5/8 • Overall Length Metric: 78.5 • Bearing Dia Metric: 12.7 • Radius 1 Metric: 17.5

The whole profile edge of the cutter can be used for skirting boards and period style finishes in furniture. Different parts of these cutters can be used to give various profiles. Specifications: &bu more→ll; Shank Diameter: 1/2 • Dia Metric: 27 • Cut Length Metric: 45 • Overall Length Metric: 94 • Bearing Dia Metric: 12.7 • Bearing Dia Imperial: 1/2 • Radius 1 Metric: 3 • Radius 2 Metric: 9

Ideal for shelves. Edge moulding applications only. Specifications: • Shank Diameter: 1/2 • Dia Metric: 22 • Cut Length Metric: 25 • Overall Length Metric: 74 • Bearing Dia M more→etric: 16 • Radius 1 Metric: 3

These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut. Specifications: • Dia Metric: 40 • Sawbore: M12 • Saw Kerf Me more→tric: 10 • Saw Teeth: 2

These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut. Specifications: • Dia Metric: 40 • Sawbore: M12 • Saw Kerf Me more→tric: 15 • Saw Teeth: 2

A range of heavy duty 'T' slot cutters for clamping and hanging applications. Relief cut required. MEC mechanical feed only. Specifications: • Shank Diameter: 1/2 • Dia Metric: 30 • more→Dia2 Metric: 10.5 • Cut Length Metric: 7 • Overall Length Metric: 60 • Radius 1 Metric: 3

A range of heavy duty 'T' slot cutters for clamping and hanging applications. Relief cut required. Specifications: • Shank Diameter: 1/2 • Dia Metric: 35 • Dia Imperial: 1 3/8 • more→Dia2 Metric: 12.7 • Cut Length Metric: 9.5 • Cut Length Imperial: 3/8 • Overall Length Metric: 65

Professional Quality, sockets manufactured from chrome vanadium steel hardened, tempered and chrome plated for corrosion protection. Chamfered end allows positive nut location and entry. Hole for driv more→ing accessory with locking pin. Sold loose.

Sds Plus-5x Drill Bit Offers Highly Efficient Drilling In Reinforced Concrete. As Proof Of Quality, The Drill Bit Bears The Test Mark Of The Pgm Masonry Drill Bit Association Board, Guaranteeing Compl more→iance With Tight Tolerances, Exact Drilling And The Firm Hold Of Fixings. It Is Compatible With Rotary Hammers With Sds Plus Holders.Features:- Geometrical Form Of The 4-Cutter Head Prevents Jamming And Breakage For Optimal Results- Turn-Angle Head And 4-Flute Design Provide Fast Dust Removal For Increased Drilling Speeds And Reduced Wear- Fits All Sds Plus Rotary Hammer Drills.- Centring Tip Guides Drilling From The Start For Efficient Work And Exact Hole Diameters- Pgm Guarantee In Compliance …