Bits & Sockets Sets

Trend Trade Cutter for Worktop Joints - 1/2in diameter 50mm cut length 1/2in diameter cutter for kitchen worktop jointing, cutting the joints and bolt recesses. High quality micro-granular tungsten more→carbide cutting edges for maximum performance and durability on laminate and solid timber worktops for professional results every time. PTFE coating on the bodies minimises heat and resin build up for increased performance and longevity. Etched K mark shank for safe insertion into the router collet. Ideal for standard 40mm deep worktops. Supplied in a storage tube for maximum protection when transporting from job to job. Specifications: • Shank Diameter: 1/2 • Dia Metric: 12.7 • …

Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods. For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the more→most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks. Specifications: • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 50 • Overall Length Metric: 93 • Type or Grade: Centre tip

A one piece bearing guided set. Parts are inter-changed on the arbor to alter the set-up. Specifications: • Shank Diameter: 1/2 • Dia Metric: 41 • Cut Length Metric: 6.35 • Overa more→ll Length Metric: 76 • Rebate Metric: 22

V point through hole slow spiral TCT drills can be used in drilling machines or portable routers. Tungsten Carbide Tipped for long life. Router drilling ensures hole is perpendicular to surface. Sp more→ecifications: • Shank Diameter: 1/4 • Dia Metric: 5 • Cut Length Metric: 39 • Overall Length Metric: 69

Two rounded corners can be cut simultaneously. By adjusting the assembly of spacers on the arbor, timber between 10mm and 32mm thick can be moulded. Central guide bearing can be removed and fitted more→above or below the cutters. Specifications: • Shank Diameter: 1/2 • Dia Metric: 38 • Overall Length Metric: 96 • Bearing Dia Metric: 28 • Radius 1 Metric: 5

These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut. Specifications: • Dia Metric: 40 • Sawbore: M12 • Saw Kerf Me more→tric: 15 • Saw Teeth: 2

These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut. Specifications: • Dia Metric: 50 • Sawbore: M12 • Saw Kerf Me more→tric: 9.5 • Saw Teeth: 4

These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut. Specifications: • Dia Metric: 50 • Sawbore: M12 • Saw Kerf Me more→tric: 2.5 • Saw Teeth: 4

These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut. Specifications: • Dia Metric: 50 • Sawbore: M12 • Saw Kerf Me more→tric: 7 • Saw Teeth: 4

These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut. Specifications: • Dia Metric: 40 • Sawbore: M12 • Saw Kerf Me more→tric: 10 • Saw Teeth: 2

These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut. Specifications: • Dia Metric: 50 • Sawbore: M12 • Saw Kerf Me more→tric: 11 • Saw Teeth: 4

These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut. Specifications: • Dia Metric: 50 • Sawbore: M12 • Saw Kerf Me more→tric: 8 • Saw Teeth: 4

These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut. Specifications: • Dia Metric: 50 • Sawbore: M12 • Saw Kerf Me more→tric: 4 • Saw Teeth: 4

These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut. Specifications: • Dia Metric: 50 • Sawbore: M12 • Saw Kerf Me more→tric: 5 • Saw Teeth: 4

These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut. Specifications: • Dia Metric: 50 • Sawbore: M12 • Saw Kerf Me more→tric: 3 • Saw Teeth: 4

These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut. Specifications: • Dia Metric: 50 • Sawbore: M12 • Saw Kerf Me more→tric: 2 • Saw Teeth: 4

Slotters with M12x1.0 threaded bore enables flush recessing in the corner such as for weather proofing. Spacers are supplied to ensure the minimal threaded arbor protrudes below the slotter. Arbor 3 more→3/20 enables 12mm bore guide bearings to be fitted above slotter for self-guiding work. Specifications: • Shank Diameter: 1/2 • Dia Metric: 18.5 • Overall Length Metric: 50 Contents: 1 x Arbor 1 x Spacer 2mm

A Tapered plug ensures an exceptionally tight fit is achieved. Tapered plug cutters with Tungsten Carbide Tips will produce many hundreds of plugs before resharpening is required. For use in drilling more→machines at a recommended speed of 3000 RPM (max. 6000 RPM). Material must be well clamped. Specifications: • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 15 • Overall Length Metric: 70

These machine bits are typically used by kitchen furniture manufacturers for recessing circular hinges. This type without scribers are for laminate covered boards. Specifications: • Shank Diamet more→er: 3/8 • Dia Metric: 35 • Dia Imperial: 1 3/8 • Overall Length Metric: 65 • Type or Grade: TCT

These machine bits are typically used by kitchen furniture manufacturers for recessing circular hinges. This type without scribers are for laminate covered boards. Specifications: • Shank Diamet more→er: 1/4 • Dia Metric: 35 • Dia Imperial: 1 3/8 • Overall Length Metric: 65 • Type or Grade: TCT

These machine bits are typically used by kitchen furniture manufacturers for recessing circular hinges. This type with scribers is used on veneered and wood finishes. Use with pillar drills only. Sp more→ecifications: • Shank Diameter: 3/8 • Dia Metric: 35 • Dia Imperial: 1 3/8 • Overall Length Metric: 65 • Type or Grade: TCT

These machine bits are typically used by kitchen furniture manufacturers for recessing circular hinges. This type with scribers is used on veneered and wood finishes. Use with pillar drills only. Sp more→ecifications: • Shank Diameter: 1/4 • Dia Metric: 35 • Dia Imperial: 1 3/8 • Overall Length Metric: 65 • Type or Grade: TCT