Bits & Sockets Sets

Classic skirting board mould. Specifications: • Shank Diameter: 1/2 • Dia Metric: 37 • Cut Length Metric: 40 • Overall Length Metric: 88.5 • Bearing Dia Metric: 16 • Ra more→dius 1 Metric: 13.5

A quarter ellipse cutter for architraves and mould finishes. For stationary machines - 12000 RPM recommended speed. Specifications: • Shank Diameter: 1/2 • Dia Metric: 69.2 • Cut Leng more→th Metric: 16 • Overall Length Metric: 78.5 • Bearing Dia Metric: 12.7 • Radius 1 Metric: 44

Panel raiser cutters for producing the panel for cabinet panelled doors, tool matches our range of profile scribers. Suitable for use on natural timber and MDF. For use in a router table only. Take more→several passes, increasing the depth with each pass. Must be used in a stationary variable speed router either mounted overhead or inverted in a router table at a reduced speed. For use on natural timber and MDF. Stationary use only. Specifications: • Shank Diameter: 1/2 • Dia Metric: 67 • Cut Length Metric: 16 • Cut Length Imperial: 5/8 • Overall Length Metric: 78.5 • Bearing Dia Metric: 12.7 • Radius 1 Metric: 17.5

Trend Kitchen Fitters Pack - 3 X 50mm x 12.7mm worktop cutters 12.7mm diameter X 50mm cutting depth; the essential cutter for routing post formed joints with worktop jigs in tops up to 40mm thick. C more→ut crisp and clean precision fit joints every time; especially suited for use on abrasive chipboard core laminate faced worktops. Bottom cut feature for plunge work including stopped grooving and morticing applications. Supplied in plastic storage case for protection when not in use. 1/2in shank for use in bigger routers and heavier applications with 'K'mark shank to ensure safe working practices. Specifications: • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • …

The whole profile edge of the cutter can be used for skirting boards and period style finishes in furniture. Different parts of these cutters can be used to give various profiles. Specifications: &bu more→ll; Shank Diameter: 1/2 • Dia Metric: 27 • Cut Length Metric: 45 • Overall Length Metric: 94 • Bearing Dia Metric: 12.7 • Bearing Dia Imperial: 1/2 • Radius 1 Metric: 3 • Radius 2 Metric: 9

Ideal for shelves. Edge moulding applications only. Specifications: • Shank Diameter: 1/2 • Dia Metric: 22 • Cut Length Metric: 25 • Overall Length Metric: 74 • Bearing Dia M more→etric: 16 • Radius 1 Metric: 3

These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut. Specifications: • Dia Metric: 40 • Sawbore: M12 • Saw Kerf Me more→tric: 10 • Saw Teeth: 2

These slotters have a M12 threaded boss to enable them to be threaded onto the arbor without the need for a securing nut. Specifications: • Dia Metric: 40 • Sawbore: M12 • Saw Kerf Me more→tric: 15 • Saw Teeth: 2

A range of heavy duty 'T' slot cutters for clamping and hanging applications. Relief cut required. MEC mechanical feed only. Specifications: • Shank Diameter: 1/2 • Dia Metric: 30 • more→Dia2 Metric: 10.5 • Cut Length Metric: 7 • Overall Length Metric: 60 • Radius 1 Metric: 3

A range of heavy duty 'T' slot cutters for clamping and hanging applications. Relief cut required. Specifications: • Shank Diameter: 1/2 • Dia Metric: 35 • Dia Imperial: 1 3/8 • more→Dia2 Metric: 12.7 • Cut Length Metric: 9.5 • Cut Length Imperial: 3/8 • Overall Length Metric: 65

covers 10 sizes, 8-24mm
45 tooth ratchet handle
supplied in a plastic container.
Great Quality material

The SDS plus-5X Drill Bit offers highly efficient drilling in reinforced concrete. The geometrical form of the 4-cutter head prevents jamming and breakage for optimal results. The “turn-angle” head an more→d the large and short dust removal channels within the 4-flute design provide fast dust removal so the bit can slice through concrete and rebar quickly with reduced wear. For efficient work and exact hole diameters, the centring tip guides drilling from the start, to prevent wandering, which can falsify the hole diameter. The bit is intended for use on masonry, concrete and reinforced concrete. As proof of quality, the drill bit bears the test mark of the PGM Masonry Drill Bit Association Board, gua…

Professional Quality, socket manufactured from chrome vanadium steel hardened, tempered and chrome plated for corrosion protection. Chamfered end allows positive nut location and entry. Hole for drivi more→ng accessory with locking pin. Manufactured to DIN 3124/ISO 2725 and DIN 3120/ISO 1174 Specifications Contents: 1 x Elora Bi-Hexagon Socket, 1" Sq. Dr., 2.3/16"

The step drill bit is made of HSS (high-speed steel) and offers a long lifetime when using coolant. Easily visible and durable markings of the hole diameter are provided by laser-marked figures in bot more→h spiral flutes. In addition, the 3-flat shank prevents slipping in the chuck and also provides powerful high-torque transmission. The HSS Step Drill Bit performs smooth, burr-free drilling in several diameters with one drill bit. It is ideal for deburring, for drilling round holes and for enlarging existing ones. Pre-punching is not necessary, because the split-point tip allows for an easy start. Its CNC ground spiral flute enables optimised chip removal and less vibration for even drilling. The …