Bits & Sockets Sets

Professional Quality, manufactured from chrome vanadium steel hardened, tempered and chrome plated for corrosion protection. Chamfered end allows positive nut location and entry. Hole for driving acce more→ssory with locking pin. Manufactured to DIN 3124/ISO 2725 and DIN 3120/ISO 1174 Specifications Contents: 1 x Elora Bi-Hexagon Socket, 1" Sq. Dr., 50mm

3 degree undercut router bit with shank mounted bearing guide for routing a leading edge on doors to allow a tight fit against jamb. Specifications: • Shank Diameter: 1/2 • Dia Metric: 24.2 more→• Cut Length Metric: 50 • Overall Length Metric: 100 • Bearing Dia Metric: 19.1 • Angle: 93

Manufactured from Beryllium Copper. Die forged. WallDrive® socket configuration. Features & Benefits: • Manufactured from Beryllium Copper. • Die forged. • WallDrive® 12-point socket configuration. • more→Lifetime guarantee*. • Model No. NS050 Specifications: Model No NS050 Brand: Premier Depth: Standard Drive: 1/2"Sq Material: Beryllium Copper Nett Weight: 0.100kg Size: 17mm

5x Wood tips 3-8mm
5x 4-8mm Masonry tips
0x HSS-TiN metal tips 1.5-4.5mm in 0.5mm increments, 4.5, & 6mm
7x sockets 4-11mm
37x Inserts 25mm
10x 50mm inserts
1 more→x Magnetic adapter for 25mm inserts
1x Countersink

NK.A 3/4" drive impact extensions. For your safety, use impact extensions and accessories with the appropriate rings and pins. Specifications • Drive: 3/4" • Size: 252mm

Trend Letter Templates - 4 Piece Set The ideal routing accessory for making consistent, high quality name plates using a cutter and guide bush. Working conjunction with a 13mm guide bush and cutter more→the template is fast and easy to use to make impressive, bold and easy to read signs. Clear acrylic design allows easy and fast setup, and full line of sight when routing. Routed letters are uppercase, 57mm high for easy visibility and ideal for many applications including house signs, directional signs and more. Compatible with the Trend TEMP/LN57X1/4 set for flat bottomed 8mm wide letters.

TCT cutter with staggered cutting surfaces. Deep mortising and grooving giving good chip clearance. For lock mortising, two width cuts will be needed to achieve the standard 19mm mortise. The loc more→k mortiser will plunge and clear chips to a depth of 70mm in a number of passes. Tool has extra long shanks. Adjust the cutter in the collet to achieve maximum plunge depth. Take several passes to avoid cutter breakage and motor overload. Specifications: • Shank Diameter: 1/2 • Dia Metric: 16 • Dia Imperial: 5/8 • Cut Length Metric: 50 • Overall Length Metric: 103

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can more→be produced. A full round/bullnose for stair treads can also be produced by taking a second pass from the opposite side of the workpiece. Specifications: • Shank Diameter: 1/4 • Dia Metric: 24.7 • Cut Length Metric: 12 • Overall Length Metric: 51 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 6

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Sp more→ecifications: • Shank Diameter: 1/2 • Dia Metric: 44.5 • Dia Imperial: 1 3/4 • Cut Length Metric: 25 • Cut Length Imperial: 1 • Overall Length Metric: 63

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Sp more→ecifications: • Shank Diameter: 1/2 • Dia Metric: 47.6 • Dia Imperial: 1 7/8 • Cut Length Metric: 25 • Cut Length Imperial: 1 • Overall Length Metric: 63

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Dia more→meter: 1/2 • Dia Metric: 14 • Dia Imperial: 35/64 • Cut Length Metric: 50 • Overall Length Metric: 95

The Wiha Collector Standard Bit Set 61 Piece for both machine and hand operation. The robust Collector box is made from high-tensile plastic. The box opens automatically at the press of a button.Bits more→conform to DIN 3126, ISO 1173, Style C6,3. This 61 Piece Set contains the following: 4 x 25mm Standard Slotted Bits: 4.5, 5.5, 6.5 & 8.0mm. 23 x 25mm Standard Phillips Bits: PH1(x7), PH2(x13) & PH3 (x3). 23 x 25mm Standard Pozidriv Bits: PZ1(x7), PZ2(x13) & PZ3 (x3). 6 x 25mm Standard TORX® Bits: T10, T15, T20, T25, T30 & T40. 4 x 25mm Standard Hexagon Bits: 3.0, 4.0, 5.0 & 6.0mm. 1 x Magnetic CentroFix Force Mechanically Lockable Bit Holder 60mm.