Bits & Sockets Sets

The classic method of producing cabinet panelled door and drawer fronts is made easy with these Profile Scriber sets. With the combination type, components are re-arranged on the arbor to cut the prof more→ile or the scribe. Cuts both parts of the joint by reassembly of the tool. Router table use only. 1/4 inch and 8mm shanks should only be used with a medium or heavy duty router. For certain routers the aperture in the base may need to be enlarged. A workholding device should be used when cutting the scribe cut on the rail ends. The cutting edges should be staggered to each other. Specifications: • Shank Diameter: 1/2 • Dia Metric: 41 • Cut Length Metric: 17 • Overall Length …

The classic method of producing cabinet panelled door and drawer fronts is made easy with these Profile Scriber sets. With the combination type, components are re-arranged on the arbor to cut the prof more→ile or the scribe. Cuts both parts of the joint by reassembly of the tool. Router table use only. 1/4 inch and 8mm shanks should only be used with a medium or heavy duty router. For certain routers the aperture in the base may need to be enlarged. A workholding device should be used when cutting the scribe cut on the rail ends. The cutting edges should be staggered to each other. Specifications: • Shank Diameter: 1/2 • Dia Metric: 41 • Cut Length Metric: 17 • Overall Length …

The classic method of producing cabinet panelled door and drawer fronts is made easy with these Profile Scriber sets. With the combination type, components are re-arranged on the arbor to cut the prof more→ile or the scribe. Cuts both parts of the joint by reassembly of the tool. Router table use only. 1/4 inch and 8mm shanks should only be used with a medium or heavy duty router. For certain routers the aperture in the base may need to be enlarged. A workholding device should be used when cutting the scribe cut on the rail ends. The cutting edges should be staggered to each other. Specifications: • Shank Diameter: 8 mm • Dia Metric: 41 • Cut Length Metric: 17 • Overall Length …

The classic method of producing cabinet panelled door and drawer fronts is made easy with these Profile Scriber sets. With the combination type, components are re-arranged on the arbor to cut the prof more→ile or the scribe. Cuts both parts of the joint by reassembly of the tool. Router table use only. 1/4 inch and 8mm shanks should only be used with a medium or heavy duty router. For certain routers the aperture in the base may need to be enlarged. A workholding device should be used when cutting the scribe cut on the rail ends. The cutting edges should be staggered to each other. Specifications: • Shank Diameter: 1/2 • Dia Metric: 41 • Cut Length Metric: 17 • Overall Length …

TCT cutter with staggered cutting surfaces. Deep mortising and grooving giving good chip clearance. For lock mortising, two width cuts will be needed to achieve the standard 19mm mortise. Specific more→ations: • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 50 • Overall Length Metric: 108

Some Ovolo cutters can be used with radius cutters, to make rule joints. Specifications: • Shank Diameter: 1/2 • Dia Metric: 28 • Cut Length Metric: 15 • Overall Length Metric: 6 more→8 • Radius 1 Metric: 8

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Dia more→meter: 1/2 • Dia Metric: 15.9 • Dia Imperial: 5/8 • Cut Length Metric: 63 • Overall Length Metric: 105

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Dia more→meter: 1/2 • Dia Metric: 25.4 • Dia Imperial: 1 • Cut Length Metric: 37 • Overall Length Metric: 79

Purpose made for stair housing jigs. Ensures tight fit of tread in string. Specifications: • Shank Diameter: 1/2 • Dia Metric: 19 • Dia Imperial: 3/4 • Cut Length Metric: 25.5 more→• Cut Length Imperial: 1 • Overall Length Metric: 65 • Type or Grade: RH • Angle: 95

Purpose made for stair housing jigs. Ensures tight fit of tread in string. Specifications: • Shank Diameter: 1/2 • Dia Metric: 22 • Dia Imperial: 7/8 • Cut Length Metric: 26 &b more→ull; Cut Length Imperial: 1 • Overall Length Metric: 65 • Type or Grade: RH • Angle: 95

These machine bits are typically used by kitchen furniture manufacturers for recessing circular hinges. This type with scribers is used on veneered and wood finishes. Use with pillar drills only. Sp more→ecifications: • Shank Diameter: 1/4 • Dia Metric: 35 • Dia Imperial: 1 3/8 • Overall Length Metric: 65 • Type or Grade: TCT

Especially designed bevel cutter for routing Corian and similar luxury 'marble like, material which is used in many bathrooms and kitchens. Specifications: • Shank Diameter: 1/2 • Dia Metri more→c: 24 • Cut Length Metric: 25 • Overall Length Metric: 65 • Angle: 75

Professional Quality, manufactured from chrome vanadium steel hardened, tempered and chrome plated for corrosion protection. Chamfered end allows positive nut location and entry. Hole for driving acce more→ssory with locking pin. Sold loose.