Bits & Sockets Sets

NM.LA 1" drive long reach metric 6-point impact sockets. For your safety, use impact sockets and accessories with the appropriate rings and pins. Specifications • Drive: 1” • Size: 27mm

The RIDGID Screw Feed Tubing and Conduit Cutters provide clean, square cuts. They are fitted with an X-CEL Knob that can cut tubing more quickly and easily thanks to the larger, more ergonomic design. more→They can cut through copper, brass, aluminium and thin-wall steel. Models 10, 15 and 20 feature a convenient fold-away reamer.RIDGID Screw Feed No.15 Tubing and Conduit Cutter Capacity: 5-28mm (3/16 - 1.1/8in).Std. Wheel: F-158.Weight: 0.68kg. Additional Information:• Suitable For: Aluminium/Brass/Copper• Capacity: 5-28mm

• Removes surface dirt and corrosion on hubs that use wheel bolts.• Ideal for preparing wheels, hubs and brake discs or drums for re-assembly.• Use with 1/2"Sq drive adaptor.Removes surface dirt and c more→orrosion on hubs that use wheel bolts. Ideal for preparing wheels, hubs and brake discs or drums for re-assembly. Use with 1/2"Sq drive adaptor.• Removes surface dirt and corrosion on hubs that use wheel bolts. • Ideal for preparing wheels, hubs and brake discs or drums for re-assembly. • Use with 1/2”Sq drive adaptor. • Model No. VS8001Technical Specification:Disc External Diameter: ø150mmDisc Internal Diameter: ø88mmReplacement Parts: VS8001A - Cleaning DiscDimensions: Length: 160mm x …

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can more→be produced. A full round/bullnose for stair treads can also be produced by taking a second pass from the opposite side of the workpiece. Specifications: • Shank Diameter: 1/4 • Dia Metric: 32 • Cut Length Metric: 16 • Overall Length Metric: 55.5 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 9.5 • Radius 1 Imperial: 3/8

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can more→be produced. A full round/bullnose for stair treads can also be produced by taking a second pass from the opposite side of the workpiece. Specifications: • Shank Diameter: 1/2 • Dia Metric: 32 • Cut Length Metric: 16 • Overall Length Metric: 65 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 9.5 • Radius 1 Imperial: 3/8

Recessing cutter for producing double rebates. For producing recesses with a lower rebate. Designed to accept library/bookcase strip. Specifically designed for Tonk Strip. Specifications: • Sh more→ank Diameter: 1/2 • Dia Metric: 9.5 • Cut Length Metric: 13 • Overall Length Metric: 57

Recessing cutter for producing double rebates. For producing recesses with a lower rebate. Designed to accept library/bookcase strip. Specifically designed for Tonk Strip. Specifications: • Sh more→ank Diameter: 1/4 • Dia Metric: 9.5 • Dia2 Metric: 19 • Cut Length Metric: 13 • Overall Length Metric: 47.6

Panel raiser cutters for producing the panel for cabinet panelled doors, tool matches our range of profile scribers. Suitable for use on natural timber and MDF. For use in a router table only. Take more→several passes, increasing the depth with each pass. Must be used in a stationary variable speed router either mounted overhead or inverted in a router table at a reduced speed. For use on natural timber and MDF. Stationary use only. Can be used for curved panels if a copy pin is used. Specifications: • Shank Diameter: 1/4 • Dia Metric: 41 • Dia2 Metric: 7 • Cut Length Metric: 12 • Overall Length Metric: 52 • Radius 1 Metric: 12

Panel raiser cutters for producing the panel for cabinet panelled doors, tool matches our range of profile scribers. Suitable for use on natural timber and MDF. For use in a router table only. Take more→several passes, increasing the depth with each pass. Must be used in a stationary variable speed router either mounted overhead or inverted in a router table at a reduced speed. For use on natural timber and MDF. Stationary use only. Can be used for curved panels if a copy pin is used. Specifications: • Shank Diameter: 8 mm • Dia Metric: 41 • Dia2 Metric: 7 • Cut Length Metric: 12 • Overall Length Metric: 52 • Radius 1 Metric: 12

Panel raiser cutters for producing the panel for cabinet panelled doors, tool matches our range of profile scribers. Suitable for use on natural timber and MDF. For use in a router table only. Take more→several passes, increasing the depth with each pass. Must be used in a stationary variable speed router either mounted overhead or inverted in a router table at a reduced speed. For use on natural timber and MDF. Stationary use only. Can be used for curved panels if a copy pin is used. Specifications: • Shank Diameter: 1/2 • Dia Metric: 41 • Dia2 Metric: 7 • Cut Length Metric: 12 • Overall Length Metric: 50 • Radius 1 Metric: 12

These staff bead are ideal for producing nosings and attractive edges. Edge cut only. Specifications: • Shank Diameter: 1/2 • Dia Metric: 27 • Dia Imperial: 1 1/16 • Cut Length M more→etric: 30 • Cut Length Imperial: 1 3/16 • Overall Length Metric: 68 • Overall Length Imperial: 2 19/32 • Radius 1 Metric: 8 • Radius 1 Imperial: 5/16

Drill bits with a spiral angle of 28 and a point angle of 118. The drill bits have a split point for better positional accuracy. These are standard drill bits to be used in steel and cast iron. DIN 363