Bits & Sockets Sets

Drilling Through Reinforced Concrete Is A Tough Job, And It Has Traditionally Taken Its Toll On Drill Bits. Regular Two-Cutter Bits Get Stuck In Rebar And They Eventually Break. The Full Carbide Head more→On The Expert Sds Plus-7x Is An Advanced 4-Cutter Design Made From A Single Piece Of The Toughest Metal: It Doesn'T Jam And Presents No Weakness On Impact. For Construction Professionals Drilling Concrete And Reinforced Concrete Regularly, For Example For Fixings And Installations, The Bosch Expert Sds Plus-7x Hammer Drill Bit Offers Peerless Performance, Reliability And Longevity. It Is The Expert Accessory For Sds Plus Rotary Hammer Drills.Features: - Long Life Drilling Reinforced Concrete- Exceptionally …

Expansion inserts no. 2 for bearing puller, internal thread M6, maximum tensile force. 30 kN, RFID chip, set, 2 pieces.
Product strengths: tool with an RFID chip so that it can be found in the more→workshop. The Facom integrated chip guarantees you easy to find and maximum durability, without losing the ergonomics of the tool. The radio wave identification requires adequate organisational equipment. Use with the reversible ratchets and drive squares 3/8 inch and 1/2 inch
Technical data: |d [mm]: 6.0|No. : 2|with internal thread: M6|T [kN]: 30|[g]: 27|[kg]: 0.027

NM.LA 1" drive long reach metric 6-point impact sockets. For your safety, use impact sockets and accessories with the appropriate rings and pins. Specifications • Drive: 1” • Size: 27mm

• Removes surface dirt and corrosion on hubs that use wheel bolts.• Ideal for preparing wheels, hubs and brake discs or drums for re-assembly.• Use with 1/2"Sq drive adaptor.Removes surface dirt and c more→orrosion on hubs that use wheel bolts. Ideal for preparing wheels, hubs and brake discs or drums for re-assembly. Use with 1/2"Sq drive adaptor.• Removes surface dirt and corrosion on hubs that use wheel bolts. • Ideal for preparing wheels, hubs and brake discs or drums for re-assembly. • Use with 1/2”Sq drive adaptor. • Model No. VS8001Technical Specification:Disc External Diameter: ø150mmDisc Internal Diameter: ø88mmReplacement Parts: VS8001A - Cleaning DiscDimensions: Length: 160mm x …

Two Flute Rounding Over Bits To form corner radius to shelves, table tops, etc. With ball bearing guide for curved work.

Two Flute Rounding Over Bits To form corner radius to shelves, table tops, etc. With ball bearing guide for curved work.

Recessing cutter for producing double rebates. For producing recesses with a lower rebate. Designed to accept library/bookcase strip. Specifically designed for Tonk Strip. Specifications: • Sh more→ank Diameter: 1/2 • Dia Metric: 9.5 • Cut Length Metric: 13 • Overall Length Metric: 57

Recessing cutter for producing double rebates. For producing recesses with a lower rebate. Designed to accept library/bookcase strip. Specifically designed for Tonk Strip. Specifications: • Sh more→ank Diameter: 1/4 • Dia Metric: 9.5 • Dia2 Metric: 19 • Cut Length Metric: 13 • Overall Length Metric: 47.6

Panel raiser cutters for producing the panel for cabinet panelled doors, tool matches our range of profile scribers. Suitable for use on natural timber and MDF. For use in a router table only. Take more→several passes, increasing the depth with each pass. Must be used in a stationary variable speed router either mounted overhead or inverted in a router table at a reduced speed. For use on natural timber and MDF. Stationary use only. Can be used for curved panels if a copy pin is used. Specifications: • Shank Diameter: 1/4 • Dia Metric: 41 • Dia2 Metric: 7 • Cut Length Metric: 12 • Overall Length Metric: 52 • Radius 1 Metric: 12

Panel raiser cutters for producing the panel for cabinet panelled doors, tool matches our range of profile scribers. Suitable for use on natural timber and MDF. For use in a router table only. Take more→several passes, increasing the depth with each pass. Must be used in a stationary variable speed router either mounted overhead or inverted in a router table at a reduced speed. For use on natural timber and MDF. Stationary use only. Can be used for curved panels if a copy pin is used. Specifications: • Shank Diameter: 8 mm • Dia Metric: 41 • Dia2 Metric: 7 • Cut Length Metric: 12 • Overall Length Metric: 52 • Radius 1 Metric: 12

Panel raiser cutters for producing the panel for cabinet panelled doors, tool matches our range of profile scribers. Suitable for use on natural timber and MDF. For use in a router table only. Take more→several passes, increasing the depth with each pass. Must be used in a stationary variable speed router either mounted overhead or inverted in a router table at a reduced speed. For use on natural timber and MDF. Stationary use only. Can be used for curved panels if a copy pin is used. Specifications: • Shank Diameter: 1/2 • Dia Metric: 41 • Dia2 Metric: 7 • Cut Length Metric: 12 • Overall Length Metric: 50 • Radius 1 Metric: 12

These staff bead are ideal for producing nosings and attractive edges. Edge cut only. Specifications: • Shank Diameter: 1/2 • Dia Metric: 27 • Dia Imperial: 1 1/16 • Cut Length M more→etric: 30 • Cut Length Imperial: 1 3/16 • Overall Length Metric: 68 • Overall Length Imperial: 2 19/32 • Radius 1 Metric: 8 • Radius 1 Imperial: 5/16

Drill bits with a spiral angle of 28 and a point angle of 118. The drill bits have a split point for better positional accuracy. These are standard drill bits to be used in steel and cast iron. DIN 363