Bits & Sockets Sets

Use for bevelling, chamfering and for producing mortar grooves. Approximately 1.0mm flat will be found on the nose. Specifications: • Shank Diameter: 1/4 • Dia Metric: 27.5 • Dia Imp more→erial: 1 • Cut Length Metric: 13 • Overall Length Metric: 59 • Angle: 45

Ideal for following templates when panelling and profiling in furniture manufacture. It is advisable that the template is at least 5mm thicker than the cut length of the cutter. Specifications: &bu more→ll; Shank Diameter: 1/4 • Dia Metric: 22 • Cut Length Metric: 10 • Overall Length Metric: 51 • Bearing Dia Metric: 22 • Radius 1 Metric: 3.5

Shank mounted bearing follows template mounted on board surface. It is advisable that the template is at least 5mm thicker than the cutter. Specifications: • Shank Diameter: 1/4 • Dia Met more→ric: 22 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 52 • Bearing Dia Metric: 22 • Radius 1 Metric: 4 • Radius 2 Metric: 5.5

The classic method of producing cabinet panelled door and drawer fronts is made easy with these Profile Scriber sets. With the combination type, components are re-arranged on the arbor to cut the prof more→ile or the scribe. Cuts both parts of the joint by reassembly of the tool. Router table use only. 1/4 inch and 8mm shanks should only be used with a medium or heavy duty router. For certain routers the aperture in the base may need to be enlarged. A workholding device should be used when cutting the scribe cut on the rail ends. The cutting edges should be staggered to each other. Specifications: • Shank Diameter: 1/4 • Dia Metric: 41 • Cut Length Metric: 17 • Overall Length …

The classic method of producing cabinet panelled door and drawer fronts is made easy with these Profile Scriber sets. With the combination type, components are re-arranged on the arbor to cut the prof more→ile or the scribe. Cuts both parts of the joint by reassembly of the tool. Router table use only. 1/4 inch and 8mm shanks should only be used with a medium or heavy duty router. For certain routers the aperture in the base may need to be enlarged. A workholding device should be used when cutting the scribe cut on the rail ends. The cutting edges should be staggered to each other. Specifications: • Shank Diameter: 1/4 • Dia Metric: 41 • Cut Length Metric: 17 • Overall Length …

The classic method of producing cabinet panelled door and drawer fronts is made easy with these Profile Scriber sets. With the combination type, components are re-arranged on the arbor to cut the prof more→ile or the scribe. Cuts both parts of the joint by reassembly of the tool. Router table use only. 1/4 inch and 8mm shanks should only be used with a medium or heavy duty router. For certain routers the aperture in the base may need to be enlarged. A workholding device should be used when cutting the scribe cut on the rail ends. The cutting edges should be staggered to each other. Specifications: • Shank Diameter: 1/2 • Dia Metric: 41 • Cut Length Metric: 17 • Overall Length …

The classic method of producing cabinet panelled door and drawer fronts is made easy with these Profile Scriber sets. With the combination type, components are re-arranged on the arbor to cut the prof more→ile or the scribe. Cuts both parts of the joint by reassembly of the tool. Router table use only. 1/4 inch and 8mm shanks should only be used with a medium or heavy duty router. For certain routers the aperture in the base may need to be enlarged. A workholding device should be used when cutting the scribe cut on the rail ends. The cutting edges should be staggered to each other. Specifications: • Shank Diameter: 1/2 • Dia Metric: 41 • Cut Length Metric: 17 • Overall Length …

The classic method of producing cabinet panelled door and drawer fronts is made easy with these Profile Scriber sets. With the combination type, components are re-arranged on the arbor to cut the prof more→ile or the scribe. Cuts both parts of the joint by reassembly of the tool. Router table use only. 1/4 inch and 8mm shanks should only be used with a medium or heavy duty router. For certain routers the aperture in the base may need to be enlarged. A workholding device should be used when cutting the scribe cut on the rail ends. The cutting edges should be staggered to each other. Specifications: • Shank Diameter: 8 mm • Dia Metric: 41 • Cut Length Metric: 17 • Overall Length …

The classic method of producing cabinet panelled door and drawer fronts is made easy with these Profile Scriber sets. With the combination type, components are re-arranged on the arbor to cut the prof more→ile or the scribe. Cuts both parts of the joint by reassembly of the tool. Router table use only. 1/4 inch and 8mm shanks should only be used with a medium or heavy duty router. For certain routers the aperture in the base may need to be enlarged. A workholding device should be used when cutting the scribe cut on the rail ends. The cutting edges should be staggered to each other. Specifications: • Shank Diameter: 1/2 • Dia Metric: 41 • Cut Length Metric: 17 • Overall Length …

TCT cutter with staggered cutting surfaces. Deep mortising and grooving giving good chip clearance. For lock mortising, two width cuts will be needed to achieve the standard 19mm mortise. Specific more→ations: • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 50 • Overall Length Metric: 108

Some Ovolo cutters can be used with radius cutters, to make rule joints. Specifications: • Shank Diameter: 1/2 • Dia Metric: 28 • Cut Length Metric: 15 • Overall Length Metric: 6 more→8 • Radius 1 Metric: 8

Two flute straight plunging bits General-purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

Two flute straight cutters produce a cleaner finish than the single flute cutters. Suitable for grooving, rebating, mortising and drilling. Use Tungsten Carbide tooling when working with abrasive mate more→rials such as chipboard, MDF, plywood, certain hardwoods and hard plastic. Two flutes give a clean finish to cut edges. All cutters above and including 9.5mm diameter, have TCT plunge centre tips.

Purpose made for stair housing jigs. Ensures tight fit of tread in string. Specifications: • Shank Diameter: 1/2 • Dia Metric: 19 • Dia Imperial: 3/4 • Cut Length Metric: 25.5 more→• Cut Length Imperial: 1 • Overall Length Metric: 65 • Type or Grade: RH • Angle: 95

Purpose made for stair housing jigs. Ensures tight fit of tread in string. Specifications: • Shank Diameter: 1/2 • Dia Metric: 22 • Dia Imperial: 7/8 • Cut Length Metric: 26 &b more→ull; Cut Length Imperial: 1 • Overall Length Metric: 65 • Type or Grade: RH • Angle: 95

These machine bits are typically used by kitchen furniture manufacturers for recessing circular hinges. This type with scribers is used on veneered and wood finishes. Use with pillar drills only. Sp more→ecifications: • Shank Diameter: 1/4 • Dia Metric: 35 • Dia Imperial: 1 3/8 • Overall Length Metric: 65 • Type or Grade: TCT

Especially designed bevel cutter for routing Corian and similar luxury 'marble like, material which is used in many bathrooms and kitchens. Specifications: • Shank Diameter: 1/2 • Dia Metri more→c: 24 • Cut Length Metric: 25 • Overall Length Metric: 65 • Angle: 75

The BOSCH PROFESSIONAL Expert SDS Max-8x 32x200x320 mm Wall Hammer Drill Bit is a high-quality, durable tool designed for professional use. It is specifically designed to be used with electric tools a more→nd is an essential accessory for any drilling task.Featuring an SDS Max-8x shank, this drill bit offers superior performance and stability during drilling. The shank design ensures a secure fit into the power tool, minimizing the risk of slippage or wobbling. This allows for precise and efficient drilling in various materials, including concrete, masonry, and stone.With a diameter of 32mm, this drill bit is suitable for drilling large holes. Its length of 200mm and total length of 320mm provide …