only bits & sockets setsin all categories
only bits & sockets sets
United Kingdom

Bits & Sockets Sets

 prices on 14146 models  
£30
clear
Save List
Show
Sirius 1/2" Drive Male Torx Socket Bit Extra Long 150mm
from £26.95
Compare prices and buy Sirius 1/2" Drive Male Torx Socket Bit Extra Long 1/2" T47 MTD08T47EL
Tooled-up.com  →
£27.00
Mytoolshed.co.uk (United Kingdom) →
£27.00
Compare prices2→
Sirius 1/2" Drive Male Torx Socket Bit Extra Long 150mm
from £26.95
Compare prices and buy Sirius 1/2" Drive Male Torx Socket Bit Extra Long 1/2" T50 MTD08T50EL
Tooled-up.com  →
£27.00
Mytoolshed.co.uk (United Kingdom) →
£27.00
Compare prices2→
Sirius 1/2" Drive Male Torx Socket Bit Extra Long 150mm
from £26.95
Compare prices and buy Sirius 1/2" Drive Male Torx Socket Bit Extra Long 1/2" T55 MTD08T55EL
Tooled-up.com  →
£27.00
Mytoolshed.co.uk (United Kingdom) →
£27.00
Compare prices2→
Sirius 1/2" Drive Male Torx Socket Bit Extra Long 150mm
from £26.95
Compare prices and buy Sirius 1/2" Drive Male Torx Socket Bit Extra Long 1/2" T60 MTD08T60EL
Tooled-up.com  →
£27.00
Mytoolshed.co.uk (United Kingdom) →
£27.00
Compare prices2→
Sirius 1/2" Drive Male Torx Socket Bit Extra Long 150mm
from £26.95
Compare prices and buy Sirius 1/2" Drive Male Torx Socket Bit Extra Long 1/2" T70 MTD08T70EL
Tooled-up.com  →
£27.00
Mytoolshed.co.uk (United Kingdom) →
£27.00
Compare prices2→
You may be interested in
Sirius 1/2" Drive Male Torx Socket Bit Extra Long 75mm
from £26.95
Compare prices and buy Sirius 1/2" Drive Male Torx Socket Bit Long 1/2" T100 MTD08T100L
Tooled-up.com  →
£27.00
Mytoolshed.co.uk (United Kingdom) →
£27.00
Compare prices2→
Sirius 1/2" Drive Tri-Square Spline Long Socket Bit 140mm Long
from £26.95
Compare prices and buy Sirius 1/2" Drive Tri-Square Spline Socket Bit Extra Long 1/2" XZN 14 TS08
Tooled-up.com  →
£27.00
Mytoolshed.co.uk (United Kingdom) →
£27.00
Compare prices2→
Stahlwille Extension Bars with 1/2in Wobble Drive and a swivel angle of 15° each side. Made from chrome alloy steel and chrome plated. Made in Germany.Size: 250mm (10 in).Max torque load: 200Nm.Additional Information:• Type: Extension• Size: 250mm
from £26.95 up to £30.18 
Compare prices and buy Stahlwille 1/2" Drive Wobble Extension Bar 1/2" 250mm 13010008
Tooled-up.com  →
£27.00
Mytoolshed.co.uk (United Kingdom) →
£27.00
Amazon.co.uk  →
£30.00
Compare prices3→
Bits / Sockets Stanley 1-13-906
Stanley 1-13-906
case
Kit:bit 29 pcs, socket heads 7 pcs
Bits:SL, PH, PZ, T, TH, H, standard
Socket heads:6-points
Landing square:1/4 "
In box:adapter, bit holder, ratchet wrench
Prices 8
Trend Craft Pro 1/4in shank bearing guided flush trimming cutter - 12.7mm diameter Two Flute Carbide tips. Two flute carbide TCT tips for clean, professional finish on timber lippings, plastic laminates and veneers. 12.7mm diameter X 9.5mm cutting depth shank mounted bearing guided trimmer. Ideally suited to flush trim laminate and veneer work. 1/4in shank for smaller routers and easy control for hand held trimming use on curved and straight edge work or to follow templates for shallow rebating. PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. 1/4in shank for easy control in smaller routers with 'K'mark shank to ensure safe working practices.…
from £26.95 up to £26.99 
Compare prices and buy Trend Bearing Guided Template Profiler Router Cutter 12.7mm 9.5mm 1/4" C12
Zoro.co.uk (United Kingdom) →
£27.00
Mytoolshed.co.uk (United Kingdom) →
£27.00
Tooled-up.com  →
£27.00
Compare prices3→
Trend Professional 1/4in shank bearing guided trimming cutter - 9.5mm diameter for laminate and template work 9.5mm diameter X 6.35mm cutting depth bearing guided trimmer for flush trimming of laminate and veneer work. Extra long shank allows the cutter to trim laminate and veneer on the underside of the workpiece. Also to form shallow rebates and slots with a template or guide. Double shank mounted bearings for increased surface contact for additional stability and control. 1/4in shank for easy control in smaller routers with 'K'mark shank to ensure safe working practices. Double bearings for stability. Specifications: • Shank Diameter: 1/4 • Dia Metric: 9.5 • Dia Imperial: …
from £26.95
Compare prices and buy Trend Bearing Guided Template Profiler Router Cutter 9.5mm 6.35mm 1/4" 46/
Mytoolshed.co.uk (United Kingdom) →
£27.00
Tooled-up.com  →
£27.00
Compare prices2→
Trend Craft Pro 1/4in shank bearing guided trimmer cutter - 12.7mm diameter Triple Flute Carbide tips. Triple flute carbide TCT tips ensure the cleanest of finishes on timber, plastic laminates and veneers. 25mm cutting depth, ideal for replicating shallow components with templates. 1/4in shank for smaller routers and easy control for hand held trimming use on curved and straight edge work or to follow patterns and templates. PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. 1/4in shank for easy control in smaller routers with 'K'mark shank to ensure safe working practices. Specifications: • Shank Diameter: 1/4 • Dia Metric: 12.7 …
from £26.95
Compare prices and buy Trend CRAFTPRO 3 Flute Bearing Guided Trimmer Router Cutter 12.7mm 25mm 1/
Mytoolshed.co.uk (United Kingdom) →
£27.00
Tooled-up.com  →
£27.00
Compare prices2→
All articles about bits / sockets
Screwdrivers and drills for dummies
What is the best screwdriver?
Sparks, smoke, crunch and burning smell: what can break in a drill or screwdriver
What to give to a motorist?
Used for trimming plastic or plywood overlays. Also for copy profiling with a template. Specifications: • Shank Diameter: 1/4 • Dia Metric: 15.9 • Dia Imperial: 5/8 • Cut Length Metric: 15.9 • Cut Length Imperial: 5/8 • Overall Length Metric: 67.5 • Overall Length Imperial: 2 41/64 • Bearing Dia Metric: 15.9 • Angle: 90
from £26.95
Compare prices and buy Trend CRAFTPRO Bearing Guided Trimmer Router Cutter 15.9mm 15.9mm 1/4" C11
Mytoolshed.co.uk (United Kingdom) →
£27.00
Tooled-up.com  →
£27.00
Compare prices2→
Used for trimming plastic or plywood overlays. Also for copy profiling with a template. Specifications: • Shank Diameter: 1/4 • Dia Metric: 18.2 • Dia Imperial: 23/32 • Cut Length Metric: 14 • Cut Length Imperial: 35/64 • Overall Length Metric: 54 • Bearing Dia Metric: 18.2 • Bearing Dia Imperial: 23/32 • Angle: 90
from £26.95
Compare prices and buy Trend CRAFTPRO Bearing Guided Trimmer Router Cutter 18.2mm 14mm 1/4" C117C
Mytoolshed.co.uk (United Kingdom) →
£27.00
Tooled-up.com  →
£27.00
Compare prices2→
Two flute TC cutter giving good chip clearance. Ideal for shallow lateral routing cuts such as recessing hinges. Corners will require final trimming square with a hand chisel or a corner chisel. Specifications: • Shank Diameter: 1/4 • Dia Metric: 19.1 • Dia Imperial: 3/4 • Cut Length Metric: 19 • Overall Length Metric: 51
from £26.95
Compare prices and buy Trend CRAFTPRO Hinge Recesser Router Cutter 19.1mm 19mm 1/4" C237X1/4TC
Mytoolshed.co.uk (United Kingdom) →
£27.00
Tooled-up.com  →
£27.00
Compare prices2→
For picture hanging flush to the wall. Plunge cutter & move forward, then retract out from entry hole. A template is recommended. For No8 & No10 screw heads. Not suitable for grooving applications. Specifications: • Shank Diameter: 1/4 • Dia Metric: 9.5 • Dia Imperial: 3/8 • Dia2 Metric: 4.5 • Cut Length Metric: 4.5 • Cut Length Imperial: 11/64 • Overall Length Metric: 53
from £26.95
Compare prices and buy Trend CRAFTPRO Keyhole Router Cutter 9.5mm 4.5mm 1/4" C120X1/4TC
Mytoolshed.co.uk (United Kingdom) →
£27.00
Tooled-up.com  →
£27.00
Compare prices2→
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Specifications: • Shank Diameter: 1/4 • Dia Metric: 6.3 • Dia Imperial: 1/4 • Cut Length Metric: 11 • Overall Length Metric: 44
from £22.99 up to £26.95 
Compare prices and buy Trend Professional Two Flute Straight Router Cutter 6.3mm 11mm 1/4" 3/12X1
Zoro.co.uk (United Kingdom) →
£23.00
Mytoolshed.co.uk (United Kingdom) →
£27.00
Tooled-up.com  →
£27.00
Compare prices3→
TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Specifications: • Shank Diameter: 1/2 • Dia Metric: 4 • Dia Imperial: 5/32 • Cut Length Metric: 11 • Overall Length Metric: 63
from £26.95
Compare prices and buy Trend Professional Two Flute Straight Router Cutter 4mm 11mm 1/2" 3/01X1/2
Mytoolshed.co.uk (United Kingdom) →
£27.00
Tooled-up.com  →
£27.00
Compare prices2→
Ideal for fast chamfering to remove edge on timber or create a decorative edge. Specifications: • Shank Diameter: 1/4 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Overall Length Metric: 53 • Angle: 45
from £26.95
Compare prices and buy Trend TRADE RANGE Chamfer V Grover Router Cutter 12.7mm 1/4" TR22X1/4TC
Mytoolshed.co.uk (United Kingdom) →
£27.00
Tooled-up.com  →
£27.00
Compare prices2→
Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods. For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks. Specifications: • Shank Diameter: 1/4 • Dia Metric: 9.5 • Dia Imperial: 3/8 • Cut Length Metric: 25 • Overall Length Metric: 66
from £26.95
Compare prices and buy Trend Two Flute PTFE Coated Non Stick Router Cutter 9.5mm 25mm 1/4" TR08X1
Mytoolshed.co.uk (United Kingdom) →
£27.00
Tooled-up.com  →
£27.00
Compare prices2→
Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods. For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks. Specifications: • Shank Diameter: 1/2 • Dia Metric: 10 • Dia Imperial: 25/64 • Cut Length Metric: 19 • Overall Length Metric: 63
from £26.95
Compare prices and buy Trend Two Flute PTFE Coated Non Stick Router Cutter 10mm 19mm 1/2" TR09X1/
Mytoolshed.co.uk (United Kingdom) →
£27.00
Tooled-up.com  →
£27.00
Compare prices2→
Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods. For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks. Specifications: • Shank Diameter: 1/4 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 19 • Overall Length Metric: 59
from £26.95
Compare prices and buy Trend Two Flute PTFE Coated Non Stick Router Cutter 12.7mm 19mm 1/4" TR13X
Mytoolshed.co.uk (United Kingdom) →
£27.00
Tooled-up.com  →
£27.00
Compare prices2→
Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods. For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks. Specifications: • Shank Diameter: 1/4 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 25 • Overall Length Metric: 66
from £26.95
Compare prices and buy Trend Two Flute PTFE Coated Non Stick Router Cutter 12.7mm 25mm 1/4" TR14X
Mytoolshed.co.uk (United Kingdom) →
£27.00
Tooled-up.com  →
£27.00
Compare prices2→
Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods. For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks. Specifications: • Shank Diameter: 12 mm • Dia Metric: 10 • Dia Imperial: 25/64 • Cut Length Metric: 19 • Overall Length Metric: 63
from £26.95
Compare prices and buy Trend Two Flute PTFE Coated Non Stick Router Cutter 10mm 19mm 12mm TR09X12
Mytoolshed.co.uk (United Kingdom) →
£27.00
Tooled-up.com  →
£27.00
Compare prices2→
24 more item(s)
1 ... 21 22 23 24 25 ... 590
Filters
Price
from£ up to£ 
Brands
Set
Items in set
Landing square
Bits included
Socket heads included
More features
Bit length
Socket depth
Got ideas or questions about filters? Click here!
Models