Bits & Sockets Sets

Single flute helical for drilling and slotting, cutting aluminium anodised duralium and uPVC plastic. Cutters are designed to plunge and machine or mill lateral slots. All aluminium tooling should more→be used with a coolant, wax stick or lubricant. Material should be securely clamped. Ideal for recessing and slotting extrusions. HSSE is a special grade for machining the most abrasive anodised finishes. Specifications: • Shank Diameter: 1/4 • Dia Metric: 10 • Cut Length Metric: 14 • Overall Length Metric: 80 • Type or Grade: Up-cut

Trend Craft Pro 1/4in shank bearing guided round over router cutter - 6mm radius Two Flute Carbide tips. Two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber more→and timber based materials. Bearing guided classic round over detail for edge detailing on curved and straight work with additional bearing for quirked Ovolo detail option. 6mm radius ideal for lighter round over and Ovolo detail or bullnosing on thinner stock. 1/4in shank for smaller routers and easy control for hand held use. PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. 1/4in shank for easy control in smaller routers with 'K'mark shank to …

Tungsten Carbide Tipped. Two flute cutter with a positive shear angle (down-cut) for fast cutting and fine finish. Ideal for grooving & trimming veneer finishes & laminated boards. Down cut feature more→stops break out on top edge. Has a 4 degree shear. Specifications: • Shank Diameter: 1/2 • Dia Metric: 9.5 • Dia Imperial: 3/8 • Cut Length Metric: 25 • Overall Length Metric: 70

Eccentric single flute cutters. Cutters are chosen for fast free cutting, when cutting speed takes preference over finish. Small diameter tools must be handled with care to avoid breakage. Singl more→e flute cutters should not be used in eccentric chucks. Specifications: • Shank Diameter: 1/4 • Dia Metric: 6.3 • Dia Imperial: 1/4 • Cut Length Metric: 25 • Overall Length Metric: 57

Self-guiding triple flute cutter. Extra fine trimming and longer life. For trimming of laminate or plywood overlay etc. Specifications: • Shank Diameter: 1/4 • Dia Metric: 12.7 • more→Dia Imperial: 1/2 • Cut Length Metric: 25.4 • Overall Length Metric: 66 • Bearing Dia Metric: 12.7 • Bearing Dia Imperial: 1/2 • Angle: 90

Miniature bearing cutters ideal for sign-making, musical instrument building and other small intricate projects. Can be used on wood and plastic. Small bearing allows access to tight spaces and give more→s sharp corners. The unique design delivers a constant cutting edge that eliminates the need for hand sanding or filing. The tools have miniature bearings fitted which have a limited life of approximately 100 linear metres, after which these consumables will need to be replaced. Specifications: • Shank Diameter: 1/4 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 9.5 • Cut Length Imperial: 3/8 • Overall Length Metric: 46 • Bearing Dia Metric: 4.8 …

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Dia more→meter: 1/4 • Dia Metric: 14 • Dia Imperial: 9/16 • Cut Length Metric: 20 • Overall Length Metric: 58

For coves and part of a rule joint. Specifications: • Shank Diameter: 1/4 • Dia Metric: 4.8 • Cut Length Metric: 11 • Overall Length Metric: 60 • Radius 1 Metric: 2.4

A two flute cutters with extra long shanks. Deep grooving, rebating and mortising. Useful for template work when thickness of template restricts depth. Extra care must be taken to avoid breakage more→. Take more passes than usual, and only cut up to half the diameter of the cutter in one pass. Specifications: • Shank Diameter: 1/4 • Dia Metric: 6.3 • Dia Imperial: 1/4 • Cut Length Metric: 19/19 • Overall Length Metric: 70 • Type or Grade: Two flute

Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods. For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the more→most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks. Specifications: • Shank Diameter: 12 mm • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 50 • Overall Length Metric: 93 • Type or Grade: Centre tip

Professional Quality, sockets manufactured from chrome vanadium steel hardened, tempered and chrome plated for corrosion protection. Chamfered end allows positive nut location and entry. Hole for driv more→ing accessory with locking pin. Some socket sizes have knurled band for extra hand grip. Sold loose.

Professional Quality, sockets manufactured from chrome vanadium steel hardened, tempered and chrome plated for corrosion protection. Chamfered end allows positive nut location and entry. Hole for driv more→ing accessory with locking pin. Some socket sizes have knurled band for extra hand grip. Sold loose.

Expert Quality, sockets adaptors forged from chrome molybdenum steel hardened, tempered with black phosphate finish. Packed in blow mould case.