Bits & Sockets Sets

Stahlwille Hexagon Sockets with 3/4in Drive made from HPQ® high performance quality steel and chrome plated. The socket has an extremely high load capacity with exceptionally thin rings and walls. more→It is free from cadmium and therefore suitable for use on titanium alloy parts and titanium fasteners, such as those used in the aerospace industry, where safety is a crucial factor. The socket is equipped with an anti-slip drive to permit high transmission of forces to the lands of the nuts and bolts without damaging them. Manufactured to DIN 3124/ISO 2725-1, ASME B 107.5M. Made in Germany.Stahlwille Hexagon Socket 3/4 in Drive. Size: 38mm.Length: 64mm.Additional Information:• Type: Hex• …

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. S more→pecifications: • Shank Diameter: 1/4 • Dia Metric: 25 • Dia Imperial: 63/64 • Cut Length Metric: 19 • Cut Length Imperial: 3/4 • Overall Length Metric: 59.5

Two flute straight plunging bits General-purpose tool suitable for profiling, rebating and through slotting. Plunge cut when on the move.

Range of small diameter shank cutters for Mini CNC router carving machines. For carving. Two flute upcut spiral. Specifications: • Shank Diameter: 4mm • Dia Metric: 2.5 • Cut Length more→Metric: 12 • Overall Length Metric: 50

Range of small diameter shank cutters for Mini CNC router carving machines. For carving. Two flute upcut spiral. Specifications: • Shank Diameter: 4mm • Dia Metric: 3.96 • Cut Length more→Metric: 15 • Overall Length Metric: 50

Cutter are designed to plunge and machine or mill lateral slots. All aluminium tooling should be used with a coolant, wax stick or lubricant. Material should be securely clamped. Single flute hel more→ical for drilling and slotting, cutting aluminium anodised duralium and uPVC plastic. Ideal for recessing and slotting extrusions. HSSE is a special grade for machining the most abrasive anodised finishes. Specifications: • Shank Diameter: 8 mm • Dia Metric: 5 • Cut Length Metric: 18 • Overall Length Metric: 60 • Type or Grade: Up-cut

Two flute cutters for producing extra clean cut bevelled edges. No plunge cut. Specifications: • Shank Diameter: 1/4 • Dia Metric: 25.4 • Dia Imperial: 1 • Cut Length Metric: 10 more→• Cut Length Imperial: 25/64 • Overall Length Metric: 50 • Angle: 60

These staff bead are ideal for producing nosings and attractive edges. Edge cut only. Specifications: • Shank Diameter: 1/4 • Dia Metric: 13.5 • Cut Length Metric: 12.7 • Cut Len more→gth Imperial: 1/2 • Overall Length Metric: 53 • Radius 1 Metric: 2

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Sp more→ecifications: • Shank Diameter: 1/4 • Dia Metric: 25.4 • Dia Imperial: 1 • Cut Length Metric: 19.1 • Cut Length Imperial: 3/4 • Overall Length Metric: 60

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Sp more→ecifications: • Shank Diameter: 1/2 • Dia Metric: 25.4 • Dia Imperial: 1 • Cut Length Metric: 19.1 • Cut Length Imperial: 3/4 • Overall Length Metric: 58

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Sp more→ecifications: • Shank Diameter: 8 mm • Dia Metric: 25 • Dia Imperial: 63/64 • Cut Length Metric: 19 • Cut Length Imperial: 3/4 • Overall Length Metric: 59.5

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Sp more→ecifications: • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 38 • Cut Length Imperial: 1 1/2 • Overall Length Metric: 81

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. S more→pecifications: • Shank Diameter: 1/2 • Dia Metric: 12 • Dia Imperial: 15/32 • Cut Length Metric: 38 • Cut Length Imperial: 1 1/2 • Overall Length Metric: 80

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Sp more→ecifications: • Shank Diameter: 1/2 • Dia Metric: 16 • Dia Imperial: 5/8 • Cut Length Metric: 19 • Cut Length Imperial: 3/4 • Overall Length Metric: 61

Plastic side fence for straight work on Combination Router Base. Long length for greater support at beginning and end of cut. The fence can be fitted in three positions on the CRB, bridge end, middl more→e or rod end. Can be fitted both vertically or horizontally to base plate, to suit application. Facility to fit a sacrificial fence for edge profiling (user can notch into sacrificial fence). If two fences fitted the CRB can be used as limited ski attachment for relief carving. Made from cast acrylic. Contents: 1 x Side fence 4 x Fixing screws

Tungsten Carbide Tipped for abrasive materials such as Chipboard, MDF, Plywood, Hardwoods and Hard Plastics. Two flutes give a clean finish to the cut edges. All cutters are suitable for plunge router more→s. Cutters above and including 9.5mm have TCT plunge Centre tip

Tungsten Carbide Tipped for abrasive materials such as Chipboard, MDF, Plywood, Hardwoods and Hard Plastics. Two flutes give a clean finish to the cut edges. All cutters are suitable for plunge router more→s. Cutters above and including 9.5mm have TCT plunge Centre tip

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Specifications: • Shank Diameter: 1/4 • Dia Metric: more→2.5 • Cut Length Metric: 8 • Overall Length Metric: 48

Tungsten Carbide Tipped for abrasive materials such as Chipboard, MDF, Plywood, Hardwoods and Hard Plastics. Two flutes give a clean finish to the cut edges. All cutters are suitable for plunge router more→s. Cutters above and including 9.5mm have TCT plunge Centre tip

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Specifications: • Shank Diameter: 1/2 • Dia Metric: more→3.2 • Dia Imperial: 1/8 • Cut Length Metric: 11 • Overall Length Metric: 56

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Specifications: • Shank Diameter: 1/2 • Dia Metric: more→4.7 • Dia Imperial: 3/16 • Cut Length Metric: 11 • Overall Length Metric: 56

Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods. For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the more→most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks. Specifications: • Shank Diameter: 1/4 • Dia Metric: 6.3 • Dia Imperial: 1/4 • Cut Length Metric: 25 • Overall Length Metric: 68.7

Gives a clean finish to abrasive materials such as chipboard, MDF, plywood and certain hardwoods. For housing, grooving and mortising. Features 2mm micrograin Tungsten Carbide tips, for cutting the more→most abrasive materials to give extra long life. PTFE coated, indicated by distinctive black colouring. Can be used on hardwood & softwood, fibreboard, plywood and particle board. Etched dimensions on extra long 40mm shanks. Specifications: • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 25 • Overall Length Metric: 66