Bits & Sockets Sets

Forged and heat treated Chrome Vanadium steel impact grade socket, chemically blackened for corrosion resistance. Malleable steel material makes the socket suitable for use with either hand ratchet wr more→enches or air impact wrenches. Features & Benefits: • Forged and heat treated Chrome Vanadium steel impact grade socket, chemically blackened for corrosion resistance. • Malleable steel material makes the socket suitable for use with either hand ratchet wrenches or air impact wrenches. • Lifetime guarantee*. • Model No. SX010 Specifications: Model No SX010 Application(s): Hub Nuts; Land Rover and Range Rover Brand: Sealey Nett Weight: 0.90kg Size: 52mm 6-point

Sirius 1/2" Drive Male Torx Socket Bit Extra Long 75mm

Sirius 1/2" Drive Male Torx Socket Bit Extra Long 75mm

Stahlwille INHEX Extra long sockets have 1/2in Square Drive and are suitable for hexagon socket head screws. They are manufactured from chrome alloy steel and are chrome plated. Manufactured to DIN 74 more→22 (metric sizes). Made in Germany.Stahlwille INHEX Socket 1/2in Drive Xtra Long. Size: 12mm.Overall Length: 140mm.Additional Information:• Type: In-Hex Extra Long• Size: 12mm• Length: 140mm

Stahlwille Series 40ADL Bi-Hexagon, extra deep sockets have 1/4in Square Drives. They come in AF imperial sizes, and are made from HPQ® high-performance steel, with chrome plating. The sockets hav more→e an extremely high load capacity with exceptionally thin rings and walls. They are free from cadmium and therefore suitable for use on titanium alloy parts and titanium fasteners, such as those used in the aerospace industry, where safety is crucial. The sockets are equipped with anti-slip drives which permit high transmission of forces to the lands of the nuts and bolts without damaging them. Manufactured to DIN 3124/ISO 2725-1 standards.Overall length: 50mm. MADE IN GERMANY.Stahlwille Extra Deep …

VASO 3/4" HEXAGONAL - 55 21

Stahlwille Hexagon Sockets with 3/4in Drive made from HPQ® high performance quality steel and chrome plated. The socket has an extremely high load capacity with exceptionally thin rings and walls. more→It is free from cadmium and therefore suitable for use on titanium alloy parts and titanium fasteners, such as those used in the aerospace industry, where safety is a crucial factor. The socket is equipped with an anti-slip drive to permit high transmission of forces to the lands of the nuts and bolts without damaging them. Manufactured to DIN 3124/ISO 2725-1, ASME B 107.5M. Made in Germany.Stahlwille Hexagon Socket 3/4 in Drive. Size: 24mm.Length: 51mm.Additional Information:• Type: Hex• …

Spray-on resin remover & cutter cleaning liquid. Simply spray on wipe off. Supplied in pump action dispenser. Ideal for sawblades, router bits, planer blades and drill bits etc. Corrosion inhibi more→ting agent prevents rusting of blades whilst being cleaned. Liquid has dissolving properties that quickly and harmlessly removes caked on resin. Specifications: • Type or Grade: 100 ml

Reduction sleeve is used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the the correct size collet is recommended. Should not be used for extensi more→ve periods or heavy work. Specifications: • Dia Metric: 12 • Overall Length Metric: 30 • Sawbore: 6.35 • Sawbore Imperial: 1/4

Single fluted Tungsten Carbide straight cutter for fast free cutting. Single flutes should be chosen where speed and clearance rates are more important than the finish. Depth of cut should not exc more→eed cutter diameter. Specifications: • Shank Diameter: 1/4 • Dia Metric: 4.8 • Dia Imperial: 3/16 • Cut Length Metric: 11.1 • Cut Length Imperial: 7/16 • Overall Length Metric: 56.5

These are made from a single piece of High Speed Steel, ground with a very fine edge. They are only suitable for non abrasive materials, but will give a superior finish in soft timbers. Generally more→HSS cutters are slightly less expensive than their TC grades, but can be more suitable for certain applications. Suitable for general grooving and rebating. Specifications: • Shank Diameter: 1/4 • Dia Metric: 6.3 • Dia Imperial: 1/4 • Cut Length Metric: 28 • Overall Length Metric: 59

Bearing for slotting systems. Ball bearings should be wiped clean, not dipped in solvent. Prevent resin build-up by cleaning with wire brush. Specifications: • Cut Length Metric: 13 • Be more→aring Dia Metric: 43 • Sawbore: 12

Bearing for slotting systems. Ball bearings should be wiped clean, not dipped in solvent. Prevent resin build-up by cleaning with wire brush. Specifications: • Cut Length Metric: 10 • Be more→aring Dia Metric: 42 • Sawbore: 12

Reduction sleeve is used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the the correct size collet is recommended. Should not be used for extensi more→ve periods or heavy work. Specifications: • Dia Metric: 10 • Overall Length Metric: 25 • Sawbore: 8

Reduction sleeve is used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the the correct size collet is recommended. Should not be used for extensi more→ve periods or heavy work. Specifications: • Dia Metric: 12.7 • Dia Imperial: 1/2 • Overall Length Metric: 30 • Sawbore: 6.35 • Sawbore Imperial: 1/4

Reduction sleeve is used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the the correct size collet is recommended. Should not be used for extensi more→ve periods or heavy work. Specifications: • Dia Metric: 12.7 • Dia Imperial: 1/2 • Overall Length Metric: 30 • Sawbore: 8

Reduction sleeve is used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the the correct size collet is recommended. Should not be used for extensi more→ve periods or heavy work. Specifications: • Dia Metric: 12.7 • Dia Imperial: 1/2 • Overall Length Metric: 30 • Sawbore: 9.5 • Sawbore Imperial: 3/8

Reduction sleeve is used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the the correct size collet is recommended. Should not be used for extensi more→ve periods or heavy work. Specifications: • Dia Metric: 12.7 • Dia Imperial: 1/2 • Overall Length Metric: 30 • Sawbore: 6

Reduction sleeve is used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the the correct size collet is recommended. Should not be used for extensi more→ve periods or heavy work. Specifications: • Dia Metric: 12 • Overall Length Metric: 25 • Sawbore: 10

Reduction sleeve is used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the the correct size collet is recommended. Should not be used for extensi more→ve periods or heavy work. Specifications: • Dia Metric: 12 • Overall Length Metric: 30 • Sawbore: 6

Reduction sleeve is used to reduce the collet size to take cutters with smaller shanks. Should only be used as a stop-gap, as the the correct size collet is recommended. Should not be used for extensi more→ve periods or heavy work. Specifications: • Dia Metric: 9.5 • Dia Imperial: 3/8 • Overall Length Metric: 25 • Sawbore: 8

Range of small diameter shank cutters for Mini CNC router carving machines. For carving. Two flute v groove. Specifications: • Shank Diameter: 4mm • Dia Metric: 6.3 • Dia Imperial: 1 more→/4 • Cut Length Metric: 3 • Overall Length Metric: 50 • Type or Grade: Inc 90 deg • Angle: 45

Range of small diameter shank cutters for Mini CNC router carving machines. For carving. Two flute v groove. Specifications: • Shank Diameter: 4mm • Dia Metric: 6.3 • Dia Imperial: 1 more→/4 • Cut Length Metric: 5 • Overall Length Metric: 49 • Type or Grade: Inc 60 deg • Angle: 60

Range of small diameter shank cutters for Mini CNC router carving machines. For carving. Two flute v groove Specifications: • Shank Diameter: 4mm • Dia Metric: 6.3 • Dia Imperial: 1/ more→4 • Cut Length Metric: 9 • Overall Length Metric: 49 • Type or Grade: Inc 30 deg • Angle: 75