Amplifiers

Packaged included: 1 x Audio Power Amplifier 1 x Remote control Specifications: Size: 26 * 29 * 10cm Rated voltage: 220V-240V 50 / 60Hz Rated power: 1200W Peaks: 2000W Rated frequency: 20KH - 20KHz Signal to noise ratio: 90dB Standard impedance: 4 to 16 ohm Type of power amplifier: AV power amplifier Channel: 2.0 channel Total harmonic distortion: ≤ 0.5% Signal input sensitivity: 200mv (± 30mv) Microphone input sensitivity: 9 mv (± 2mv) Recording level output: 1V Auxiliary level output: 1V Support:USB Disk/Max 64GB SD Card(Not included) Colour: Black Features: -Support 4 way microphone input -LED display -2 tack output With EQ -Reverberation, fine tuning, balance, SD, USB interface.

D10s is compatible with 16-32bit/44.1-384kHz and DSD64-DSD256 D10s uses XMOS XU208 for USB interface and uses customized driver which from Thesycon for better compatibility with high resolution audio file especially DSD native. Even some USB port support power after PC has shut down, D10s still will synchronously power on /off with PC. D10s can accurately indicate the audio format (PCM or DSD) and sampling rate of the playing music. Orange LED is soft and not dazzling even at night. D10s has OP amp socket, DIYer could change the OP amp to get different sound.

Four-chip decoding for superior sound：The DL100 is capable of directly sampling 32bit/768kHz PCM digital audio without down sampling. lt also supports DSD256 native DSD playback without conversion.Optical and coaxialinputs support DOP 64. Newly upgraded headphone amplification circuitry：Adopts self-developed independent amplification circuit for excellent performance. Performance compared to the previous generation of CS43131 products, the output power increase of about 16 times at 300Ω. USB Dual Mode 2.0/1.1: There are 2 different USB modes that can be switched within the menu, using USB2.0, driver installation is required to support high sample rate audio files up to 768kHz/32bit. Using USB1.…

RMS-series Multi Zone 100V AmplifiersMulti-channel 100V slave amplifier with independent outputs for 100V or 4-16 Ohm speakers. Each amplifier channel has its own independent line input, which can be switched to a global auxiliary, providing the option of the same input to several of the amplifier channels if required. A paging microphone input is provided for voice alerts and a 24V mute terminal can be connected to an alarm panel for emergency evacuation override. Class D circuit design and efficient toroidal transformers have enabled a design which fits into a 1U rack-mount housing. The RMS-series amplifiers can be applied as high power slave units or equally as a fully independent zoning …

The SMSL M500MK3 DAC uses the high-end ES9038PRO D/A chip from the American ESS company. it uses ES9311, the ES9311 special power supply chip for ESS high-performance DAC, the power supply noise is as low as 1uVrms. The third-generation ES9038PRO circuit design, the distortion is as low as 0.00006% , and more stable. The new PLFC headphone amplifier circuit enables the headphone amplifier to obtain more than 2W output power and less than 0.0001% distortion under a 16 ohm load! The new self-developed CK-03 clock processing circuit greatly reduces clock jitter. Built-in shielded, low-noise power processing, while improving power efficiency and lower power consumption. USB uses XMOS XU-316, a …

【Multi-functional SMSL PL200】 PL200 is an MQA-CD player, Bluetooth receiver and USB DAC. It uses a non-compressed CD solution, can fully decode MQA, and uses a Hi-End level CD solution, which is different from the portable solution. There is no compression, all the signals coming out are original, and the JTTER is very low. 【Precision Acces Servo System】 S.M.S.L has developed its own CD playback system, providing audiophile-level dynamic response and playback stability, accurate reading and other features. Additionally, combined with anti-vibration dampers and shock absorbers, this CD player has high reliability. 【Excellent AK4499EX Chip】 The SMSL PL200 MOA-CD player uses the AK4499EX decoding chi…

Integrated Amplifier / Stereo / Output power per channel 50 Watt

Sanskrit MKIII adopts the latest XMOS XU-316 scheme to support 32-bit 768kHz and DSD512. The latest CK-03 clock system is adopted, greatly reducing the system JITTER. A piece of AKM new AK4493S is adopted and carefully adjusted to reach an unprecedented 0.00013%. Sanskrit MKIII has built-in gravity acceleration sensor, which can automatically rotate and switch the display! Built in high-performance power filter system, so that it can achieve the best performance only using USB interface power supply! Anodized CNC aluminum alloy shell. Ultra small design, and support a variety of placement methods. Equipped with full function remote control function. The perfect key structure, equipped with …