Bits & Sockets Sets

covers 10 sizes, 8-24mm
45 tooth ratchet handle
supplied in a plastic container.
Great Quality material

Lasts up to 3x longer than a standard drill bitDrilling through reinforced concrete is a tough job and it has traditionally taken its toll on hammer drill bits. Even 4-cutters wear out fast, resulting in downtime changing accessories and fetching supplies. The Full Carbide Head on the Expert SDS max-8x is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact.Thanks to Bosch Carbide Technology and the Full Carbide Head, the Expert SDS max-8x lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel.For construction professionals dr…

The Ultimatecut Step Drill Revolutionizes The Work Process And Sets New Standards In Machining Time With Time Savings Of Up To 75%. The Ruko Step Drill Achieves This With Its Revolutionary Cutting Geometry, Combining The Widest Variety Of Applications And Tools. This Translates Into Fewer Tools Required, No Tool Changes And Absolute Flexibility.Features:- 5 Tools In 1.- Up To 75% Time Savings.- Maximum Flexibility.- No Knurling Thanks To The Specially Developed Turbo Tip.- Without Changing Tools Due To Pre-Drilling And Different Diameters Of Drilled Holes.- Easily Reaches Places That Are Difficult To Access, For Example T-Beams, Where The Use Of Hollow Core Drilling Machines Is Problematic.- …

With a variety of accessories to perform the most common applications, Stanley drill & screwdriver bit sets offer dependable performance to get the job done. The cases are designed to maintain the diferent accessories and keep them within easy reach. Features & Benefits • Masonry drill bits for drilling into bricks and masonry • HSS TiN drill bits for general purpose drilling in soft steel and non-ferrous metal • Brad point drill bits for clean, accurate holes in wood • Nut drivers for hexagonal fasteners • Large selection of 25mm and 50mm screwdriver bits • Magnetic screwdriver bit holder • Countersink for countersinking screws flush with the material surface …

NK.A 3/4" drive impact extensions. For your safety, use impact extensions and accessories with the appropriate rings and pins. Specifications • Drive: 3/4" • Size: 252mm

Trend Letter Templates - 4 Piece Set The ideal routing accessory for making consistent, high quality name plates using a cutter and guide bush. Working conjunction with a 13mm guide bush and cutter the template is fast and easy to use to make impressive, bold and easy to read signs. Clear acrylic design allows easy and fast setup, and full line of sight when routing. Routed letters are uppercase, 57mm high for easy visibility and ideal for many applications including house signs, directional signs and more. Compatible with the Trend TEMP/LN57X1/4 set for flat bottomed 8mm wide letters.

TCT cutter with staggered cutting surfaces. Deep mortising and grooving giving good chip clearance. For lock mortising, two width cuts will be needed to achieve the standard 19mm mortise. The lock mortiser will plunge and clear chips to a depth of 70mm in a number of passes. Tool has extra long shanks. Adjust the cutter in the collet to achieve maximum plunge depth. Take several passes to avoid cutter breakage and motor overload. Specifications: • Shank Diameter: 1/2 • Dia Metric: 16 • Dia Imperial: 5/8 • Cut Length Metric: 50 • Overall Length Metric: 103

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can be produced. A full round/bullnose for stair treads can also be produced by taking a second pass from the opposite side of the workpiece. Specifications: • Shank Diameter: 1/4 • Dia Metric: 24.7 • Cut Length Metric: 12 • Overall Length Metric: 51 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 6

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Specifications: • Shank Diameter: 1/2 • Dia Metric: 44.5 • Dia Imperial: 1 3/4 • Cut Length Metric: 25 • Cut Length Imperial: 1 • Overall Length Metric: 63

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Specifications: • Shank Diameter: 1/2 • Dia Metric: 47.6 • Dia Imperial: 1 7/8 • Cut Length Metric: 25 • Cut Length Imperial: 1 • Overall Length Metric: 63

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Diameter: 1/2 • Dia Metric: 14 • Dia Imperial: 35/64 • Cut Length Metric: 50 • Overall Length Metric: 95

The Wiha Collector Standard Bit Set 61 Piece for both machine and hand operation. The robust Collector box is made from high-tensile plastic. The box opens automatically at the press of a button.Bits conform to DIN 3126, ISO 1173, Style C6,3. This 61 Piece Set contains the following: 4 x 25mm Standard Slotted Bits: 4.5, 5.5, 6.5 & 8.0mm. 23 x 25mm Standard Phillips Bits: PH1(x7), PH2(x13) & PH3 (x3). 23 x 25mm Standard Pozidriv Bits: PZ1(x7), PZ2(x13) & PZ3 (x3). 6 x 25mm Standard TORX® Bits: T10, T15, T20, T25, T30 & T40. 4 x 25mm Standard Hexagon Bits: 3.0, 4.0, 5.0 & 6.0mm. 1 x Magnetic CentroFix Force Mechanically Lockable Bit Holder 60mm.

Professional Quality, sockets manufactured from chrome vanadium steel hardened, tempered and chrome plated for corrosion protection. Chamfered end allows positive nut location and entry. Hole for driving accessory with locking pin. Sold loose.