Bits & Sockets Sets

This Trend 46/44 Rebater includes different size bearings for a choice of rebates, they provide easy set up and, accurate, depth of cut. This set is ideal for rebating straight and shaped work pieces, particularly with delicate applications such as musical instrument production when a small rebate is required for insertion of purfling. Specifications Tooling TCT. 1/4in Shank. By changing the bearing, the size of the rebate can be altered, It is supplied with 3 bearings. 22.0 mm bearing gives rebate of 1 mm. 19 mm bearing gives rebate of 2.5 mm. 16 mm bearing gives rebate of 4 mm. D = 24 mm. C = 12.7 mm.

Popular rebate sets which include different size bearings for a choice of rebates. Ease of setting-up and accurate depth of cut. Ideal for rebating straight and shaped work pieces. Ideal with delicate applications such as musical instrument production, when a small rebate is required for insertion of purfling. When using bearing Ref. B95A, make two passes when a full depth of cut is required by using a larger bearing first. Specifications: • Shank Diameter: 8 mm • Dia Metric: 24 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 56.5 • Bearing Dia Metric: 22 • Rebate Metric: 4

A bearing guided reversible finger jointer, to increase the gluing area for edge to edge joints. Specifications: • Shank Diameter: 1/4 • Dia Metric: 24.6 • Cut Length Metric: 18.5 • Overall Length Metric: 58 • Bearing Dia Metric: 12.7

Supplied with alternative bearings to produce a rounding over and two sizes of ovolo moulding. The smaller bearing gives a 3.2mm quirk. Specifications: • Shank Diameter: 1/2 • Dia Metric: 44 • Cut Length Metric: 19 • Overall Length Metric: 67 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 12.7 • Radius 1 Imperial: 1/2

Some Ovolo cutters can be used with radius cutters, to make rule joints. Specifications: • Shank Diameter: 1/2 • Dia Metric: 38 • Cut Length Metric: 18 • Overall Length Metric: 56.1 • Radius 1 Metric: 12.7

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Diameter: 1/2 • Dia Metric: 28.5 • Dia Imperial: 1 1/8 • Cut Length Metric: 25 • Overall Length Metric: 67

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Diameter: 1/2 • Dia Metric: 28 • Dia Imperial: 1 7/64 • Cut Length Metric: 25 • Overall Length Metric: 66

Template thickness should be 5mm thicker than cut length of cutter. Specifications: • Shank Diameter: 1/2 • Dia Metric: 19 • Cut Length Metric: 32 • Overall Length Metric: 80 • Bearing Dia Metric: 19 • Radius 1 Metric: 9.5

These cutters are used extensively for routing edge moulds, face grooves, columns, fluting, water slots, engraving and panel moulds in products such as desk tops, fire surrounds, draining boards and picture frames. These cutters are suitable for use on all natural timbers and man-made boards. TC. 1/2in Shank R = 12.7 mm D = 25.4 mm C = 15.9 mm

The Wiha Collector Standard Bit Set 61 Piece for both machine and hand operation. The robust Collector box is made from high-tensile plastic. The box opens automatically at the press of a button.Bits conform to DIN 3126, ISO 1173, Style C6,3. This 61 Piece Set contains the following: 4 x 25mm Standard Slotted Bits: 4.5, 5.5, 6.5 & 8.0mm. 23 x 25mm Standard Phillips Bits: PH1(x7), PH2(x13) & PH3 (x3). 23 x 25mm Standard Pozidriv Bits: PZ1(x7), PZ2(x13) & PZ3 (x3). 6 x 25mm Standard TORX® Bits: T10, T15, T20, T25, T30 & T40. 4 x 25mm Standard Hexagon Bits: 3.0, 4.0, 5.0 & 6.0mm. 1 x Magnetic CentroFix Force Mechanically Lockable Bit Holder 60mm.

Lasts up to 3x longer than a standard drill bitDrilling through reinforced concrete is a tough job and it has traditionally taken its toll on hammer drill bits. Even 4-cutters wear out fast, resulting in downtime changing accessories and fetching supplies. The Full Carbide Head on the Expert SDS max-8x is an advanced 4-cutter design made from a single piece of the toughest metal: It doesn’t jam and presents no weakness on impact.Thanks to Bosch Carbide Technology and the Full Carbide Head, the Expert SDS max-8x lasts far longer than regular hammer drill bits. It punches through rebar effectively so there is no need to stop, re-target or change bits when you strike steel.For construction professionals dr…

The BOSCH PROFESSIONAL Expert SDS Max-8x 22x600x720 mm Wall Hammer Drill Bit is a high-quality tool designed for professional use in heavy-duty applications. This drill bit is a part of the BOSCH PROFESSIONAL range, which is known for its exceptional performance and durability.The drill bit features an SDS Max shank, which ensures a secure and firm fit in the chuck of compatible tools. This design eliminates the risk of slippage or wobbling during operation, allowing for precise and efficient drilling. With a diameter of 22 mm, the drill bit is ideal for drilling large holes in various materials, including concrete, masonry, and stone.The length of the drill bit is 600 mm, making it suitable …