Bits & Sockets Sets

• Fully ground HSS with 5% Cobalt makes these ideal for drilling extra hard materials.• 135° Split point tip enables bits to bite workpiece quickly reducing the need for centre mark.• Drills can be resharpened without affecting their performance.• Sizes: ø1-13mm in 0.5mm increments.• Supplied in metal storage case.Fully ground HSS with 5% Cobalt makes these ideal for drilling extra hard materials. 135° Split point tip enables bits to bite workpiece quickly reducing the need for centre mark. Drills can be resharpened without affecting their performance. Supplied in metal storage case.• Fully ground HSS with 5% Cobalt makes these ideal for drilling extra hard materials. • 135°…

Drilling Through Reinforced Concrete Is A Tough Job, And It Has Traditionally Taken Its Toll On Drill Bits. Regular Two-Cutter Bits Get Stuck In Rebar And They Eventually Break. The Full Carbide Head On The Expert Sds Plus-7x Is An Advanced 4-Cutter Design Made From A Single Piece Of The Toughest Metal: It Doesn'T Jam And Presents No Weakness On Impact.For Construction Professionals Drilling Concrete And Reinforced Concrete Regularly, For Example For Fixings And Installations, The Bosch Expert Sds Plus-7x Hammer Drill Bit Offers Peerless Performance, Reliability And Longevity. It Is The Expert Accessory For Sds Plus Rotary Hammer Drills.Features: - Long Life Drilling Reinforced Concrete- Exceptionally …

M.HA series 1" drive metric 6-point sockets. Features & Benefits • Thinner, lighter body • Secure attachment of plunger lock accessories • Push-button release • Satin chrome finish Specifications • Drive: 1” • Size: 55mm

Drop-forged, 8-point, steel impact socket designed for the removal of front hub nut found on Scania trucks. Features & Benefits: • Drop-forged, 8-point, steel impact socket designed for the removal of front hub nut found on Scania trucks. • Model No. CV001 Specifications: Model No CV001 Brand: Sealey Nett Weight: 1.70kg Drive: 3/4"Sq Size: 80mm Application(s): Scania Truck

Access to pipes & cables beneath chipboard floors in seconds. For builders, plumbers & electricians. A 250mm diameter opening can be cut and made good in seconds. Designed for use in new or existing 22mm chipboard or similar floors. Cuts only the thickness of the board. No waste, the piece cut out is used to make good the floor. All you need is a plunge router (750 watts or above). A Unibase may be required for certain makes and models of router. Supplied with three floor rings Specifications: • Shank Diameter: 1/4 • Cut Length Metric: 22 Contents: 1 x Routabout template 3 x Spacer rings 1 x Special TCT router cutter 1 x 30mm Plastic guide bush

Access to pipes & cables beneath chipboard floors in seconds. For builders, plumbers & electricians. A 250mm diameter opening can be cut and made good in seconds. Designed for use in new or existing 22mm chipboard or similar floors. Cuts only the thickness of the board. No waste, the piece cut out is used to make good the floor. All you need is a plunge router (750 watts or above). A Unibase may be required for certain makes and models of router. Supplied with three floor rings. Specifications: • Shank Diameter: 1/2 • Cut Length Metric: 22 Contents: 1 x Routabout template 3 x Spacer rings 1 x Special TCT router cutter 1 x 30mm Plastic guide bush

Solid Carbide replaceable blades. Tool body remains in place when changing blades, thus reducing down-time. Straight cutters have blades with two or four cutting edges, allowing them to be rotated and locked in identical positions. 1/2 inch shank tools are ideal for use in production applications. Clear economical advantage over conventional brazed tip tooling. The single blade can be rotated 180 degrees to give double the life of a conventional tool. Ideally suited for use with Trend Combi worktop jigs. Suitable for plunge cutting. Use on chipboard only. Specifications: • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 49.5 …

For architraves, framing as well as edge moulding. Specifications: • Shank Diameter: 1/2 • Dia Metric: 35 • Dia Imperial: 1 3/8 • Dia2 Metric: 26 • Cut Length Metric: 38 • Overall Length Metric: 87 • Bearing Dia Metric: 16 • Radius 1 Metric: 7 • Radius 2 Metric: 5

Bearing guided intumescent strip cutter for routing the groove for intumescent strip in a frame or door. A range of sizes available to suit 4mm thick strip from 10mm to 25mm width. Intumescent strip is used to create an effective barrier to both fire and smoke. Choose alternative bearings to suit other thicknesses of intumescent strip. Specifications: • Shank Diameter: 1/2 • Dia Metric: 40 • Cut Length Metric: 10 • Overall Length Metric: 60 • Bearing Dia Metric: 32 • Rebate Metric: 4 • Type or Grade: 10mm strip

Bearing guided intumescent strip cutter for routing the groove for intumescent strip in a frame or door. A range of sizes available to suit 4mm thick strip from 10mm to 25mm width. Intumescent strip is used to create an effective barrier to both fire and smoke. Choose alternative bearings to suit other thicknesses of intumescent strip. Specifications: • Shank Diameter: 1/2 • Dia Metric: 40 • Cut Length Metric: 15 • Overall Length Metric: 70 • Bearing Dia Metric: 32 • Rebate Metric: 4 • Type or Grade: 15mm strip

Bearing guided intumescent strip cutter for routing the groove for intumescent strip in a frame or door. A range of sizes available to suit 4mm thick strip from 10mm to 25mm width. Intumescent strip is used to create an effective barrier to both fire and smoke. Choose alternative bearings to suit other thicknesses of intumescent strip. Specifications: • Shank Diameter: 1/2 • Dia Metric: 40 • Cut Length Metric: 20 • Overall Length Metric: 70 • Bearing Dia Metric: 32 • Rebate Metric: 4 • Type or Grade: 20mm strip

Especially designed bevel cutter for routing Corian and similar luxury 'marble like, material which is used in many bathrooms and kitchens. Designed to trim surface to an undermount bowl. Specifications: • Shank Diameter: 1/2 • Dia Metric: 32 • Cut Length Metric: 25 • Overall Length Metric: 76.87 • Bearing Dia Metric: 21.8 • Angle: 78

Self-guiding cutters with the facility to change the profile by fitting a larger bearing & varying the depth. Supplied with two bearings. The larger bearing removes the bottom quirk. Specifications: • Shank Diameter: 1/2 • Dia Metric: 51 • Cut Length Metric: 24 • Overall Length Metric: 72 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 9.5

An initial cut with a straight cutter is required to produce the drawer pull profile. Specifications: • Shank Diameter: 1/4 • Dia Metric: 19 • Cut Length Metric: 13 • Overall Length Metric: 48 • Radius 1 Metric: 4

Use in two passes from left & right to cut a protruding grip handle. Specifications: • Shank Diameter: 1/2 • Dia Metric: 22 • Cut Length Metric: 17 • Overall Length Metric: 60 • Radius 1 Metric: 1.5 • Radius 2 Metric: 2

Bearing guided tool to rout stepped groove for espagnolette lock recess. Two flute for clean finish. Specifications: • Shank Diameter: 1/2 • Dia Metric: 40.05 • Cut Length Metric: 16.3/12.3 • Overall Length Metric: 85 • Bearing Dia Metric: 19.1 • Bearing Dia Imperial: 3/4

Four fluted TCT trimmer/profiler. Super fine finish. Ball bearings fitted to both nose and shank. Allows templates to be placed either on top or the bottom of the material, for ease of routing. Allows for irregular grained timber to be profiled more easily, by turning component other way up. Light passes, maximum 2mm trimming. Specifications: • Shank Diameter: 1/2 • Dia Metric: 19.1 • Dia Imperial: 3/4 • Cut Length Metric: 50 • Cut Length Imperial: 1 31/32 • Overall Length Metric: 114.5 • Bearing Dia Metric: 19.1

This Raised Panel cutter runs best at lower speeds between 12,000 and 18,000 RPM. Matches our range of profile scribers. Suitable for use on natural timber and MDF. When joining sections to produce solid wood panels, alternate the growth ring direction of adjacent boards to prevent cupping. When moulding the panel, cut across the end grain first. Any break out will then be removed when cutting with the grain. Suitable panel mould for use with Ref. PSC/5. Specifications: • Shank Diameter: 1/2 • Dia Metric: 50 • Dia2 Metric: 16 • Cut Length Metric: 17 • Overall Length Metric: 55.1 • Angle: 10

Flat Roman Ogee, for raised panelling or edge moulding. Used for decorative capping on hand rails. Specifications: • Shank Diameter: 1/2 • Dia Metric: 41.5 • Cut Length Metric: 8 • Overall Length Metric: 56 • Radius 1 Metric: 19 • Radius 2 Metric: 11

Flat Roman Ogee, for raised panelling or edge moulding. Used for decorative capping on hand rails. Specifications: • Shank Diameter: 1/2 • Dia Metric: 50 • Cut Length Metric: 6.5 • Overall Length Metric: 51.8 • Radius 1 Metric: 20 • Radius 2 Metric: 12

A popular variety, the Modern Torus skirting board mould. Specifications: • Shank Diameter: 1/2 • Dia Metric: 35 • Dia Imperial: 1 3/8 • Cut Length Metric: 39 • Overall Length Metric: 88 • Bearing Dia Metric: 16 • Radius 1 Metric: 9.5

The whole profile edge of the cutter can be used for skirting boards and period style finishes in furniture. Different parts of these cutters can be used to give various profiles. Specifications: • Shank Diameter: 1/2 • Dia Metric: 35 • Dia Imperial: 1 3/8 • Cut Length Metric: 42 • Overall Length Metric: 90.5 • Bearing Dia Metric: 12.7 • Bearing Dia Imperial: 1/2 • Radius 1 Metric: 3.2 • Radius 2 Metric: 6.5

Machining of traditional panels and frame doors, formerly done on spindle moulders, can now be performed with heavy duty routers mounted in fixed positions, either overhead or inverted. These Raised Panel cutters run best at lower speeds and match our range of profile scribers. All are suitable for use on natural timber and MDF. 8mm hank tools are for use with medium and heavy duty routers only. Suitable panel mould for use with Refs. PSC/2 & PSC/20. Specifications: • Shank Diameter: 1/2 • Dia Metric: 50 • Dia2 Metric: 22 • Cut Length Metric: 14 • Overall Length Metric: 52 • Radius 1 Metric: 14