Bits & Sockets Sets

Trend Snappy Robertson Driver Bits - No1, 2 and 3 sizes Set of three driver bits with Square Drive (Robertson) profiles. Covers all three head sizes of Robertson fixings: No1, 2 and 3. For use with more→Robertson screws; the ideal fixing for maximum driving performance without cam out issues. 50mm long bits with 1/4in hex shank for a direct fit for impact drivers or all Trend Snappy chucks ensuring fast swapping between accessories. Bit sizes of (2.38 mm), 1/8in (3.2 mm) & 9/64in (3.6 mm) covering all popular screw sizes. Specifications: • Shank Diameter: 1/4 hex • Dia Imperial: 3/32-9/64 • Overall Length Metric: 50 • Type or Grade: R1,2,3 • Pack Qty: 3 pack Contents: …

Trend Snappy Screwdriver bit and holder set - 15pc set Multi-profile bit set covering a wide range of screwdriving applications and screw head types. Ideal for the workshop or toolkit. Colour coded more→rings on each bit shank ensures correct, quick and easy bit selection every time. Each bit has a reduced shank torsion zone area to reduce strain on the bit as it drives, minimising breakage under heavy load and reducing cam out for superior torque transmission. Set contains fourteen 25mm insert bits and a magnetic bit holder with sleeve chuck in a flip lid storage container with belt clip, keeping everything close to hand as you work. Each bit is made from High grade hardened tool steel and …

These slotters have a 12mm clear bore to enable them to be mounted at any position on the arbor in combination with spacers, with or without a bearing. Requires heavy duty arbor accessory. Recommend more→ed used in a fixed head router at 12,000 rpm. Specifications: • Dia Metric: 86 • Sawbore: 12 • Saw Kerf Metric: 2 • Saw Plate Thick Metric: 1 • Saw Teeth: 12

These slotters have a 12mm clear bore to enable them to be mounted at any position on the arbor in combination with spacers, with or without a bearing. Specifications: • Dia Metric: 50 • S more→awbore: 12 • Saw Kerf Metric: 10 • Saw Teeth: 4

These slotters have a 12mm clear bore to enable them to be mounted at any position on the arbor in combination with spacers, with or without a bearing. Specifications: • Dia Metric: 50 • S more→awbore: 12 • Saw Kerf Metric: 8 • Saw Teeth: 4

These slotters have a 12mm clear bore to enable them to be mounted at any position on the arbor in combination with spacers, with or without a bearing. Specifications: • Dia Metric: 50 • S more→awbore: 12 • Saw Kerf Metric: 4 • Saw Teeth: 4

Two part portable hinge jig fully adjustable for recessing hinges in wooden doors and frames Minimal setting up time Easy to use on site or in the workshop Fully adjustable apertures for fire door req more→uirements and renovation work Can be used on internal and external doors and maximum 25mm thick stops Ideal for fitting a new door in an old frame

Especially designed for routing Corian which is used in many bathrooms and kitchens. For trimming bowls, trepanning and face milling. Can also be used for trimming and face milling of timber. Specif more→ications: • Shank Diameter: 1/2 • Dia Metric: 52.3 • Cut Length Metric: 6.5 • Overall Length Metric: 83

Profilers with shank mounted bearings for guidance, for use with router mounted above or below a table when following a template. Bearing guided cutters are suitable for both straight and curved work. more→For profiling and rebating applications only. NOT for plunge, cutting or grooving. A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing.

Scribing cutter to suit glazing bar ovolo. Designed for sash bar window construction. Specifications: • Shank Diameter: 1/4 • Dia Metric: 25 • Cut Length Metric: 20 • Overall Leng more→th Metric: 48.6 • Radius 1 Metric: 10

Router Pod universal router safety stand. For use with jigs and templates when a guide bush is fitted to the router base. Prevents laying of router on side or head. Ideal for use when cutter depth more→is set with a fine height adjuster. U-shape design to allow easier router fitting. Rubber feet for anti slip. Stack double for extra long cutters. Prevents cutter damage to workbench. Made from ABS plastic. Contents: 1 x Router Pod

These plug cutters are designed to exactly fit the counterbored holes produced by group 62 and 63 Trend cutters. Recommended speed - 1,000-20,000 /min. TCT for use with drilling machines or routers. H more→.S.S. 1/4in Shank. C = 9.5 mm D = 16 mm Plug Body Diameter. 16 mm

These plug cutters are designed to exactly fit the counterbored holes produced by group 62 and 63 Trend cutters. Recommended speed - 1,000-20,000 /min. H.S.S. 1/4in Shank. C = 16 mm D = 12 mm Plug Bod more→y Diameter. 22 mm

These plug cutters produces plugs to exactly fit counterbored holes produced by Ref. 62 & 63 group tools. Use at recommended speeds of 1000-20000 RPM. Specifications: • Shank Diameter: 1/4 &bul more→l; Dia Metric: 12 • Cut Length Metric: 16 • Overall Length Metric: 55

For abrasive materials. Tools will drill, countersink and finally counterbore a parallel hole. Designed to receive plug produced by maker Ref. 24 group. The drill diameter sizes are for a clearance ho more→le only. Specifications: • Shank Diameter: 1/4 • Dia Metric: 9.5 • Dia Imperial: 3/8 • Dia2 Metric: 4.8 • Cut Length Metric: 20 • Overall Length Metric: 62

For abrasive materials. Tools will drill, countersink and finally counterbore a parallel hole. Designed to receive plug produced by maker Ref. 24 group. The drill diameter sizes are for a clearance ho more→le only. Specifications: • Shank Diameter: 1/4 • Dia Metric: 12 • Dia2 Metric: 5.5 • Cut Length Metric: 20 • Overall Length Metric: 62

Lip and Spur - Short series. These slow spiral TCT drills can be used in drilling machines or portable routers. Suitable for use in the DeWalt DE6252 Dovetail Jig. For drilling machines or routers. more→Specifications: • Shank Diameter: 1/4 • Dia Metric: 8 • Cut Length Metric: 35 • Overall Length Metric: 70

Lip and Spur - Short series. These slow spiral TCT drills can be used in drilling machines or portable routers. Suitable for use in the DeWalt DE6252 Dovetail Jig. For drilling machines or routers. S more→pecifications: • Shank Diameter: 1/4 • Dia Metric: 10 • Overall Length Metric: 70

With bearing guided ogees, change profile by using a larger bearing and vary the depth. Specifications: • Shank Diameter: 1/4 • Dia Metric: 34.9 • Cut Length Metric: 20 • Overall more→Length Metric: 58 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 6.3

With bearing guided ogees, change profile by using a larger bearing and vary the depth. Specifications: • Shank Diameter: 1/2 • Dia Metric: 34.9 • Cut Length Metric: 20 • Overall more→Length Metric: 67.5 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 6.3

With bearing guided ogees, change profile by using a larger bearing and vary the depth. Specifications: • Shank Diameter: 1/4 • Dia Metric: 25.4 • Dia Imperial: 1 • Cut Length Met more→ric: 15.9 • Cut Length Imperial: 5/8 • Overall Length Metric: 54 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 4

With bearing guided ogees, change profile by using a larger bearing and vary the depth. Specifications: • Shank Diameter: 1/2 • Dia Metric: 25.4 • Dia Imperial: 1 • Cut Length Met more→ric: 15.9 • Cut Length Imperial: 5/8 • Overall Length Metric: 63 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 4

Bearings are shielded to prevent penetration of dust and grease packed for life. They should not be cleaned with solvent or lubricated as this will dissolve the grease and cause premature bearing fa more→ilure. Scrape off any resin build-up. Always check the tightness of the fixing screw before using cutter. Specifications: • Cut Length Metric: 6 • Bearing Dia Metric: 18 • Sawbore: 8

Bearing for slotting systems. Ball bearings should be wiped clean, not dipped in solvent. Prevent resin build-up by cleaning with wire brush. Specifications: • Cut Length Metric: 9.3 • B more→earing Dia Metric: 32.9 • Sawbore: 12.7 • Sawbore Imperial: 1/2