Batteries for Drones & RC models

Mini 4WD upgrade parts High-performance motor with carbon brushes for increased durability In addition to outstanding top speed growth, the high-performance motor delivers sharp dashing power even on consecutive corners and steep climbs. High durability using carbon brushes is also attractive. Appropriate voltage: 2.4-3.0V, rotation speed: 24000-27500r/min, current consumption: 4-5A *Cannot be used for Tamiya official races.

2.4G FS-GT2 2CH Radio Model RC Transmitter & Receiver Car Boat Features: Super active and passive anti-jamming capabilities. Very low power consumption. High receiving sensitivity. Work between 2.400GHz to 2.4835GHz frequencies, divide into 160 frequency points. Use a linear spread of fine paragraph by an excess antenna. It covers the entire band width of the antenna bandwidth range. Has its own unique ID, increase the anti-jamming capability and stability. Specifications: Transmitter: Channels: 2 Channels Model Type: Car/Boat RF Power: Less than 20dbm Modulation: GFSK Code Type: Digital Sensitivity: 1024 Low Voltage Warning: Yes (less than 9v) DSC Port: Yes Charger Port: Yes Power: 12V DC …

Mini 4WD upgrade parts Light and strong 17mm aluminum roller with a nimble 3-spoke design Attractive smooth rotation with ball bearings incorporated in the bearing part Comes with a plastic ring that shows its power in high-speed corners

Mini 4WD upgrade parts Tune-up motor for advanced users for Mini 4WD PRO Adopts a high-efficiency brush that combines high durability and excellent conductivity. Demonstrates high performance on all courses, from high-speed courses to technical courses Rotation speed at proper load 17200r/min Proper load 0.98mN・m (10g・cm) *To use this motor, installation of the separately sold 8T pinion gear (ITEM.15289 8T pinion gear set), maintenance of the counter gear and pinion gear, and high-level machine settings are required.

Mini 4WD upgrade parts Torque type with excellent acceleration and little loss of power even on curves and uphill slopes Double shaft motor suitable for technical courses Basic specifications: Appropriate voltage: 2.4~3.0V Recommended load torque: 1.7~2.1mN・m Rotation speed: 12200~14400r/min Current consumption: 1.7~2.0A At recommended load torque Available machines: Mini 4WD PRO cars

Mini 4WD upgrade parts Roller with built-in ball bearings for smooth rotation Comes with a rubber ring to reduce impact with the course and stabilize your ride. Lightweight and strong aero spoke type

Mini 4WD upgrade parts A roller with a tapered bottom surface that makes it easier to return to the course. Basic specifications: 2 all-aluminum rollers, 2 2×8 round screws, 4 roller spacers Available machines: Mini 4WD PRO, Mini 4WD cars

Items useful for machine maintenance Maintenance oil for mini 4WD used for metal parts such as bearings and eyelets. Features a viscosity that prevents oil from running out and does not cause rotational resistance. Adopts a safe tapered nozzle made of resin Contents: 5ml

Mini 4WD upgrade parts Machined aluminum roller with a diameter of 19mm that expands the range of roller settings A 520 bearing is embedded in the main body to achieve smooth rotation. There is no rubber or plastic ring around the outer circumference of the roller, so it can be attached to the front or rear. Can be installed on various Mini 4WD cars including Mini 4WD PRO

Target gender: Unisex Main country of manufacture: Japan

Main country of manufacture: Japan

Mini 4WD upgrade parts Used for bearing part of radio 4WD Reduces rotational resistance to transmit power without waste, increases top speed, and extends running time. Outer diameter 6mm / thickness 2.5mm

------------------------------------------------------------------------- Adult products cannot be purchased by people under 18 years of age. ------------------------------------------------------------------------- *This product does not include fuel, batteries, or charger.

Features: Reliable, interference-free 2.4GHz AFHDS signal operation. Easy to bind and very fast link-up, quick and extremely stable in performance. AFHDS 3CH Receiver. Only 6.5g in weight and 37.6*22.3*13mm, Ultra-lightweight design. Suit for FS-GT2 FS-GT2B FS-GT3B FS-GT3C FZ-IT4S transmitter, great for RC cars/Boats. Specifications: Brand: Flysky Product Model: FS-GR3E PWM channels: 3 Wireless frequency: 2.4GHz Wireless protocol: AFHDS Range: 100～200m (ground) Antenna type: single antenna (150mm) Failsafe: yes (channel 2) Bind port: yes (channel 3) Power port: yes (VCC) Power: 4.5-6.5V DC Model type: car/boat Temperature range: 0 ℃ — + 60 ℃ Size: 37.6*22.3*13mm Weight: 6.5g Package information…

Diameter 4mm Inner diameter 2mm 4 types of length: 12, 6, 3, 1.4mm 4 each mini 4 parts

For boys Target age: From 15 years old

---------------------------------------------------------------------- 【Cautions for using electrical products】 When using electrical appliances, please note that the voltage is different from that of Japan, which may cause malfunctions. Since the plug type is Japan type(A or B type), please check the voltage and use a transformer. Please note that a transformer is different from a conversion adapter. We are not responsible for malfunctions caused by use without a transformer. ---------------------------------------------------------------------- For boys Target age: From 15 years old

Optional parts for PLAZMA MK3.

Mini 4WD upgrade parts High-quality machined aluminum wheels High precision and high strength are also attractive, with less vibration during rotation and less deformation even in the unlikely event of a crash. Available machines: Mini 4WD PRO and Mini 4WD cars with small diameter low height tires (some bodies require processing)

Case for 10 AA batteries In addition to 10 AA batteries, the interior partitions have been designed to accommodate 4 AA batteries and 10 AAA batteries, or 7 AA batteries and 5 AAA batteries. It's about the same size as the parts case and motor case 2, so it's easy to store them together. Translucent natural color, Tamiya logo printed on the lid Body size: 90mm long x 120mm wide x 22mm high. Made of polypropylene

Mini 4WD upgrade parts HG Heavy Aluminum Wheel , popular among racers, has been renewed. Reversible type that can be used on X/XX chassis by turning it upside down and installing it. Contains 4 hexagonal wheel bushes for easy shaft orientation

[Parts useful for improving the performance and setting of RC cars] A brush that cleans the commutator part of the motor to increase the efficiency of current flow. Cleaning is completed in 2 to 3 minutes by connecting 7.2V with no load. Bring out the original performance of the motor. [Basic specifications] Set of 2 cleaning brushes.

These parts are useful for improving the performance and setting of RC cars. Adapted to DF-02. Available wheels: 53089 53728.

Parts useful for setting up and dressing up your machine High-quality machined aluminum wheels Features a design with a thick rim and a sense of solidity and depth. Set includes 2 machined aluminum wheels and 4 wheel bushes.