Sealants & Adhesives Loctite

Liquid thread sealant; replaces hemp, pastes and PTFE tape. Features and Benefits Clean and easy to apply Instant low pressure seal Conforms with DVGW approval (gas) Low strength and easily dismantled more→, seals and locks in any position Contains teflon to prevent galling Notes Coarse Threads Fast cure version of 572

Liquid thread sealant; replaces hemp, pastes and PTFE tape. Features and Benefits Clean and easy to apply Instant low pressure seal Conforms with DVGW approval (gas) Low strength and easily dismantled more→, seals and locks in any position Contains teflon to prevent galling Notes Coarse Threads Fast cure version of 572

Non-Corrosive Silicone Sealant Tempflex is a non-corrosive single part RTV silicone sealant specifically designed for use on corrosion sensitive metallic surfaces. Features and Benefits Skin over time more→30 minutes. Non-corrosive curing mechanism. Does not corrode or tarnish tracks. Meets MIL A46/46B Group II Type I. Hardness (BS Shore A) 33. Elongation at break 750%. Maximum performance capability reached after 72 hours. Maximum operating temperature +175C. Tensile strength 7N/mm2 (1000 Psi). Typical applications: Protecting corrosion sensitive parts. Sealing cover/inspection/access coverings. Waterproofing high voltage components.

Flexible Gasket Fast Cure B5205 - Red (300ml). Medium strength. High resistance to solvents. Resists high pressure when fully cures. Service Range: -50C - +150C. Tensile Sheer Strength: 3 N/mm. Max Gap: 0.125mm

Low viscosity silicone, thread sealer. Good on plastic and plastic to metal. Drinking water WRAS approved and NSF food approved. Features: - Thread sealant for fittings carrying hot or cold water. - L more→ocks connection against vibration induced loosening. Maximum pipe size: 3". Comment: for plastic and metal threaded fittings.

A 1-part, white industrial acetoxy silicone sealant/adhesive which has been designed specifically to ensure perfect sealing, as well as bonding and protection. Typical applications Sealing side window more→s in trains, sealing heat sources (ovens, heat exchangers, steam circuits, water heaters), providing protection/insulation of electrical boxes, bonding of HCR silicones and general maintenance. Features and Benefits It offers high elongation at break of 500% Suitable for glass, metal, ceramics, composites, and most plastics

A 1-part black, industrial acetoxy silicone sealant which has been formulated as a general purpose sealant, but can also be used for bonding applications. Features and Benefits The product becomes tac more→k free on exposure to atmospheric moisture within 5 min Requires no mixing Seals/bonds most substrates Typical Applications Typical sectors to benefit from the product include automotive, household electrical appliances and aerospace

High temperature, low viscosity, red adhesive/sealant. Suitable for temperatures up to 350C. Suitable for most substrates. Features and Benefits Temperature resistant Bonds almost all substrates Notes more→Strength: 2N/mm. Sealant type: silicone. Temperature: -40 to +300C. Comment: high temperature resistance, flowable.

General purpose. No hazard symbols, no risk phrases. White Material Safety Data Sheet - no need for COSHH assessment. Features and Benefits Drinking water WRAS approved Oil and vibration resistant Not more→es Maximum pipe size: 3in. Comment: No labelling, white MSDS.

General purpose. No hazard symbols, no risk phrases. White Material Safety Data Sheet - no need for COSHH assessment. Features and Benefits Drinking water WRAS approved Oil and vibration resistant Not more→es Maximum pipe size: 3in. Comment: No labelling, white MSDS.

Medium strength, For fine threaded fittings (up to 3/4 BSP). Used in hydraulic and pneumatic installations. Drinking water WRAS approved. Features: Instant low-pressure seal Resistant to fuel, oil, co more→olants and hydraulic fluids Locks connection against vibration loosening Maximum pipe size: 3/4". Comment: for small fine threaded metal fittings, especially hydraulic fittings.

Medium strength, For fine threaded fittings (up to 3/4 BSP). Used in hydraulic and pneumatic installations. Drinking water WRAS approved. Features: Instant low-pressure seal Resistant to fuel, oil, co more→olants and hydraulic fluids Locks connection against vibration loosening Maximum pipe size: 3/4". Comment: for small fine threaded metal fittings, especially hydraulic fittings.

Medium strength, For fine threaded fittings (up to 3/4 BSP). Used in hydraulic and pneumatic installations. Drinking water WRAS approved. Features: Instant low-pressure seal Resistant to fuel, oil, co more→olants and hydraulic fluids Locks connection against vibration loosening Maximum pipe size: 3/4". Comment: for small fine threaded metal fittings, especially hydraulic fittings.

545 Hydraulic, Pneumatic Sealant Thread Sealant is a pipe sealant designed for the locking and sealing of metal pipes and fittings. This product is specially formulated to offer high lubricity for eas more→y assembly and removal. Recommended for fine threaded fittings as used in hydraulic and pneumatic installations and small fittings in general. It contains no fillers or particles that could contaminate system fluids, foul valves, or clog fine filters and screens. Suitable for fittings up to 2 in. (50 mm) in diameter including pneumatic and hydraulic fittings. Excellent solvent resistance. ABSSM Approved. CFIA Approved. Applications: For Metal Parts Agency Approvals / Specifications: ABS, CFIA

LOCTITE 55 are thread sealing cords that are designed to seal off metal and plastic pipes and fittings. Features and Benefits It needs no cure time and results in an immediate, full pressure seal The more→product is quick and easy to apply and allows for reliable readjustments Typical Applications Thread sealing Gas fitting Food equipment Notes The product has approval for gas and potable water and is certified to NSF/ANSI, Standard 61

LOCTITE 55 are thread sealing cords that are designed to seal off metal and plastic pipes and fittings. Features and Benefits It needs no cure time and results in an immediate, full pressure seal The more→product is quick and easy to apply and allows for reliable readjustments Typical Applications Thread sealing Gas fitting Food equipment Notes The product has approval for gas and potable water and is certified to NSF/ANSI, Standard 61

Two part, very fast cure silicone that provides excellent bond strength to glass, metals and Ceran. Excellent temperature resistance - up to 180 C with the capability to resist higher temperatures for more→short-term exposure. Features and Benefits Extremely resistant to temperature Incredibly strong - shear strength (GBMS) N/mm: 1.35 Elongation at break: 210% Typical applications Sealing/bonding glass stove top assemblies, weld and rivet reduction in high temperature applications, and other high temperature bonding applications

Loctite 561 pipe sealant stick is a single component, semi-solid anaerobic pipe sealant compound supplied in a self feeding applicator stick that facilitates application of the material where a conven more→tional liquid or paste product would be difficult to use. Features and Benefits Semi-solid formula, ideal to pre-apply NSF food approved Doesn't creep, shrink or block systems Ideal for maintenance applications Notes Maximum pipe size: 3 in.

Threadsealer for all coarse metal threads. Slow cure allows for adjusting the alignment of valves and fittings. Offers a breakaway torque of 7 Nm. Features and Benefits Designed for the locking and se more→aling of metal pipes and fittings Cures when confined in the absence of air between close fitting metal surfaces and prevents loosening and leakage from shock and vibration The thixotropic nature of LOCTITE 572 reduces the migration of liquid product after application to the substrate Notes Maximum pipe size: 3 in. Comment: for metal coarse threads, slow curing, low strength.

Threadsealer for all coarse metal threads. Slow cure allows for adjusting the alignment of valves and fittings. Offers a breakaway torque of 7 Nm. Features and Benefits Designed for the locking and se more→aling of metal pipes and fittings Cures when confined in the absence of air between close fitting metal surfaces and prevents loosening and leakage from shock and vibration The thixotropic nature of LOCTITE 572 reduces the migration of liquid product after application to the substrate Notes Maximum pipe size: 3 in. Comment: for metal coarse threads, slow curing, low strength.

Superfast sealing product especially developed for sealing pipe connections with relatively coarse threads and flanges. Allows instant start up of fluid systems when threads are tightened up as specified.

For all coarse metal threads, especially nuclear power plants. Fast cure suitable for applications at low temperature. Features and Benefits Medium strength, methacrylate-based thread sealant well sui more→ted to the locking and sealing of metal threaded pipes and fittings up to 3" in diameter With PMUC approval, the product has low halogen and sulphur content and is designed for use in the nuclear industry on sensitive metals such as titanium Also suitable for stainless steel without the need for surface activation Thixotropic to reduce sealant migration.

Loxctite 5920 Copper High Temp RTV Silicone Gasket Maker is a one part RTV silicone that has superior flexibility and adhesion. Excellent high temperature resistance. Medium body and easy to dispense. more→Non-corrosive, low odor, low volatility. Copper in color. Typical Applications: Valve covers, oil pans, timing covers, water pumps and thermostat housings. Applications: Gasket Sealant Dressings Industrial Gasketing Industrial Moisture Cure Industrial Silicone (Flexible) - RTV Non-Rigid Flange (Silicone and Polyacrylate) Agency Approvals / Specifications: CFIA Listed Color: Copper Cure Type: Moisture Cure Extrusion Rate (g/min.): >300 Fixture Time: 60 min. Full Cure Temperature (C): 25 Full Cure …