Diamond Core Bits & Milling Cutters

Expert Tough Material For Long Life Cutting Holes In Multi Material:- Most hole saws for wood and metal seem to work fine - until you hit a hardened nail or screw. Then they scream and smoke and grind more→until their teeth are torn off, and you still only have half a hole. With its carbide teeth, the EXPERT Tough Material barely slows down when it hits metal – it cuts neatly through and keeps on cutting holes, time and again.Features:- Exceptional durability is built in with Bosch Carbide Technology.- Individually ground teeth made from fine, hard Carbide.- Special slot design for better view and plug ejection.Specifications:- Diameter mm: 83- Diameter inches: 3 1/4- Working length mm: 60Materials:- Wo…

Hollow Drill Bits Depth 30 Mm. Cbn (Polycrystalline Cubic Boron Nitride) Grinding. For Use In Magnetic Base Drill Presses And Foot Drills With Morse Taper Connection, Using Adapter 108 302 / 108 303. more→Direct Connection To Ruko Rs 10 Type Drills. Suitable For Drilling Steel Beams And Sheets, Cast Steel, Light Metals And Non-Ferrous. Great Cutting Power And Long Life. Presented In A Translucent Plastic Case With Hanger.Specifications:- Ø (Mm): 25 - Ø Stem (Mm): 19- Number Of Teeth: 6

Carbide tipped fast cutting multi-purpose holesaws suitable for most construction materials including timber, MDF, blueboard, villa board, hardiplank, plastics, fibreglass etc. 54mm depth of cut allow more→ing easy slug removal. 44 sizes available from 19 to 159mm. Suitable for use in mains and battery powered tools.

Diamond coated cutting edge permanently bonded to tough steel body provides necessary clearance for cutting at high speed. Rapidly cuts through reinforced plastic, germanium and other abrasive materia more→ls. Holesaw and Arbor sizes: 14-30mm - use Arbor XA1. 32-210mm - use Arbor XA2.

Diamond coated cutting edge permanently bonded to tough steel body provides necessary clearance for cutting at high speed. Rapidly cuts through reinforced plastic, germanium and other abrasive materia more→ls. Holesaw and Arbor sizes: 14-30mm - use Arbor XA1. 32-210mm - use Arbor XA2.

Manufactured from a Cobalt-based HSS (M42), a premium grade high speed tool steel, heat treated to surpass the hardness of other HSS materials. The increased cobalt content helps retain hardness at el more→evated temperatures. This increased hot hardness makes the material especially suited for machining stainless steels and temperature resistant alloys. It also gives the material increased wear resistance needed for machining in highly abrasive cutting applications. M42 is also a very tough grade and can therefore cope with the most aggressive applications in most materials. The Aluminium Titanium Carbo-Nitride (AlTiCN) multilayer coating has a hardness of 3700HV which surpasses many other nitride …

Features:Smooth Cutting:- Bi-metal Hole Saw offers smooth cutting through various materials- Made of bi-metal HSS containing 8% cobalt alloy for long-lasting cutting- Tooth configuration (Vario tooth more→strip) is ideal for gliding through material to provide smooth cuts- Fits threaded standard adapter.Specifications:- Diameter mm: 168- Diameter inches: 6 5/8- Working length mm: 44Materials:- Softwood- Drywall- Metal pipes and profiles- Non-ferrous metals- Plastics

Lasts up to 50x longer than HCS hole saw in tough materials - Cutting holes in brick, soft tiles and drywall is essential for plumbers and electricians on a building site or during renovation work. Fe more→w hole saws can withstand this kind of work in a mixture of tough construction materials, but the EXPERT Construction Material can. This one hole saw serves, and lasts, for many jobs. With just a few huge carbide teeth on its steel body, the EXPERT Construction Material delivers a real bite. Its large slots are optimised for fast chip removal, so it eats through anything from brick to wood and particle boards, fast. Bosch Carbide Technology is an optimum mix of the hardest metals, and ensures an …

The strong, high performance triple chip Tungsten Carbide Tipped hole saw provides long life when cutting difficult and abrasive materials, such as wood and PVC. It offers a cost effective solution fo more→r cutting through nail embedded wood, or virtually any wood and metal combination, reinforced concrete and fibreglass. Leaves high quality surface finish on entry and exit and provides a smooth cut when cutting traditional lathe and plaster. Tungsten Carbide Tipped teeth for outstanding cutting performance and product durability. Will cut nail embedded wood or virtually and wood and metal combination, such as wooden doors with metal fascia panels. Cutting depth of 41mm (1.5/8""). Suitable for use …

Diamond For Hard Ceramics Hole Saw Cuts Through The Hardest Tiles Thin Cutting Edge Allows For Rapid, Clean Cuts In Hard Ceramic Unique Power-Change Adapter With The Fastest Arbour System For Locking/ more→Unlocking Hole Saw And Pilot Drill In One Click The Diamond For Hard Ceramics Hole Saw Features Bosch´S Unique Power-Change Adapter With The Fastest Arbour System On The Market. It Allows For Locking And Unlocking The Hole Saw And Pilot Drills In One Click. It Is Suitable For Use With Corded And Cordless Drill Drivers. Diamond Coating Gives This Hole Saw Durability On Very Strong Tiles For Use With The Bosch Power Change Plus Keyless Arbor: Offering Accuracy And Robustness.Specifications:- Materials: H…

HSSCo 3 Flute 90° countersink. Specifications • Nominal Diameter: 25.0mm • Shank Diameter: 10mm • Overall Length: 67mm • Capacity: 3.8mm - 25.0mm Features and Benefits • more→Produces countersinks for cap screws • Self centering and chatter free • Can be used for chamferring • DIN 335C

The Diamond For Hard Ceramics Hole Saw Features Bosch´S Unique Power-Change Adapter With The Fastest Arbour System On The Market. It Allows For Locking And Unlocking The Hole Saw And Pilot Drills In O more→ne Click.It Is Suitable For Use With Corded And Cordless Drill Drivers.Features:- Thin Cutting Edge Allows For Rapid, Clean Cuts In Hard Ceramic- Unique Power-Change Adapter With The Fastest Arbour System For Locking/Unlocking Hole Saw And Pilot Drill In One Click- Diamond Coating Gives This Hole Saw Durability On Very Strong Tiles- Thin Cutting Edge Allows For Rapid, Clean Cuts In Hard Ceramic- For Use With The Bosch Power Change Plus Keyless Arbor: Offering Accuracy And Robustness.Specifications:- H…

Tungsten Carbide Tipped (TCT) Multi Purpose hole saws feature a unique tooth set for an ultra-aggressive, high performance cutting of non-metallics. Rapid, heat-free stock removal of wood, MDF, plasti more→cs, and ceramic tiles, with a 54mm (2.1/8") cutting depth. Power through wood, MDF, plastics, plasterboard and ceramic wall tiles up to five times faster than a bi-metal hole saw. Carbide Tipped teeth for outstanding cutting performance and product durability. Cutting depth of 54mm (2.1/8”). Smooth cut with minimal heat build up. Suitable for use in mains and battery powered tools. Special arbors featuring extended length pilot drills are availableTeeth per Inch (25mm): 1Teeth Type: Tungsten Carbide Ti…

HSSCo 3 Flute 90° countersink. Specifications • Nominal Diameter: 23.0mm • Shank Diameter: 10mm • Overall Length: 67mm • Capacity: 3.8mm - 23.0mm Features and Benefits • more→Produces countersinks for cap screws • Self centering and chatter free • Can be used for chamferring • DIN 335C

For use in magnetic-stand and pillar drilling machines with morse taper retainer. In connection with RUKO arbor holders no. 108 302 / 108 303, with RUKO EasyLock no. 108 312 / 108 313 or a weldon dire more→ct shank such as the RUKO magnetic-stand A10 drill.Core drills made of cobalt alloyed heavy-duty high speed steel with increased heat resistance. Ideal for drilling materials that are difficult to cut and for the highest demands. Suitable for working with unalloyed and alloyed steel (up to a strength of 1200 N/mm²), hot and cold-working steel and also for reinforced and case-hardened steel.Specifications:- Ø: 19,0 mm- Total length L1 63,0 mm- Shank Ø 19,0 mm- For machines: A10 / RU25 / RU40- Mat…

For use in magnetic-stand and pillar drilling machines with morse taper retainer. In connection with RUKO arbor holders no. 108 302 / 108 303, with RUKO EasyLock no. 108 312 / 108 313 or a weldon dire more→ct shank such as the RUKO magnetic-stand A10 drill.Core drill made of heavy-duty high speed steel. Suitable for steel (such as T-brackets, large sheets), cast iron, non-ferrous and light metals.Specifications:- Ø: 26,0 mm- Total length L1: 63,0 mm- Shank: Ø 19,0 mm- For machines A10 / RU25 / RU40- Material HSS- Surface Bright- Cutting direction right hand cut- Shank Weldon shank- Cutting depth 30,0 mm- Weight: 0,12200 KG

Bahco Sandflex® holesaws are made for high precision cutting of holes from 14 mm to 152 mm diameter in all sawable materials up to 38 mm thick. Suitable for use in portable electric or pneumatic t more→ools, and in a wide variety of drilling, boring, milling and other machine tools. All saws have varipitch (4-6tpi) blades.Cutting edges are in high speed steel for extra hardness, with welded seams for accuracy of cut, and heat-treated bodies for maximum strength.Size: 121 mm. Arbors to suit (available separately). Code Holesaw Size ShankBAH3834930 930 14-30 mm 3/8 Inch (8.5mm).BAH38341130 1130 14-30 mm 7/16 Inch (11.1mm).BAH38349100 9100 32-100 mm 3/8 Inch (8.5mm).BAH383411152 11152 32-210 mm 1/2 …

The Starrett Kwik-Change Arbor System offers fast, tool-free changes between different sizes and types of hole saws, plus provides a simple method for core ejection and hole enlargement. Kwik-Change i more→s an invaluable addition for any regular hole saw user. Features and Benefits • Cuts Stainless Steel, Metal, Mild Steel Sheet, Wood, Plastic & Plaster • Steel Slotted Barrel to Aid Removal of Debris • For Use with 3-Jaw Chuck Machines on Rotary Action Contents • 3 Fast Cut Hole Saws: 20, 25, 32mm • Accessories: A6, A6-2 (x2), A6-3, A015C

The Deep Cut Bi-Metal Hole saws combine the aggressive tooth form from our previous Dual Pitch Hole Saws, with the new extra cobalt HSS teeth to provide enhanced heat and wear resistance. Featuring a more→10mm increase in hole saw depth and aggressive material penetration and kerf clearance, it is the complete multi-purpose hole saw to penetrate deep into metals, wood, plastic, plaster and other materials. Aggressive material penetration and kerf clearance. Ideal for solid materials or tubes of a wall thickness greater than 3mm. 51mm hole saw depth improves cutting performance on tubes, particularly where there is a need to cut through both sides of the tube. New tooth material for enhanced heat …

The CorePlus Diamond Holesaw provides professional, fast, clean cutting on a wide range of materials, from hard porcelain tile and stone to cement board and fibreglass. Leading-edge vacuum brazing tec more→hnology ensures the diamonds stay bonded for extremely long life. Minimal water cooling is required when cutting hard tile, stone and glass. Use fully dry on other materials. Fluid, snag-free cutting, no secondary finishing required. The ultra-thin kerf generates a low amount of torque for faster cutting and extended battery life. Use with an arbor on a cordless drill or with an adaptor nut on an angle grinder.1 x CorePlus DMPHS83 Diamond Holesaw 83mm.Additional Information:• Size (mm): 83• …

Crafted from solid carbide, it offers exceptional hardness and wear resistance, making it suitable for milling a wide range of materials including stainless steel, cast steel, cast aluminium, and copp more→er. The TiALN (Titanium Aluminium Nitride) coating enhances the end mill's performance by reducing friction and heat, allowing for faster cutting speeds and extended tool life. The Weldon shank design provides increased stability and secure grip in tool holders, ensuring precise and efficient milling operations. Product Operations • Shallow shoulder milling • Deep shoulder milling • Plunge milling • Shallow slot milling • Ramping • Progressive Plunging Features & Benefits …

The strong, high performance triple chip Tungsten Carbide Tipped hole saw provides long life when cutting difficult and abrasive materials, such as wood and PVC. It offers a cost effective solution fo more→r cutting through nail embedded wood, or virtually any wood and metal combination, reinforced concrete and fibreglass. Leaves high quality surface finish on entry and exit and provides a smooth cut when cutting traditional lathe and plaster. Tungsten Carbide Tipped teeth for outstanding cutting performance and product durability. Will cut nail embedded wood or virtually and wood and metal combination, such as wooden doors with metal fascia panels. Cutting depth of 41mm (1.5/8""). Suitable for use …