Diamond Core Bits & Milling Cutters

Long Life Hole Saw and Super Fast Arbor - Most hole saws for wood and metal seem to work fine - until you hit a hardened nail or screw. Then they scream and smoke and grind until their teeth are torn more→off, and you still only have half a hole. With its carbide teeth, the EXPERT Tough Material barely slows down when it hits metal – it cuts neatly through and keeps on cutting holes, time and again. Made with Bosch Carbide Technology, each tooth is an optimum grade of the hardest metal, laser welded and ground six times for the perfect cutting shape. This makes the Bosch EXPERT Tough Material Hole Saw ideal for tough jobs and all-round trades work: As well as wood and metal, it’s a good hole saw …

Durable in Sheet Metal - The Special for Sheet Metal Hole Saw offers durability while cutting holes through metal. Made of bi-metal HSS (high-speed steel) containing 8% cobalt alloy, this hole saw has more→less risk of tooth breakage and higher heat resistance for extreme resilience and a long product lifetime. The configuration of the teeth on the Vario tooth strip is ideal for sawing through thin material with reduced wear on the cutting edge. Furthermore, a depth-stop feature prevents breakthroughs to protect the work surface. Use this hole saw when cutting through sheet metal with a thickness of less than 5 mm, such as mild steel and stainless steel. It is suitable for use with all corded and …

They are designed to drill and coutersink simultaneously, a wide variety of materials. Supplied with a HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. The TCT version is used more→for plywood, particle boards and plastics (abrasive). Use at drilling speeds only. Not suitable for ferrous or non ferrous metals. Please ensure drill flutes are aligned with flutes of countersink. For replacement Twist Drills, use slow spiral type e.g. Refs 501/18 to 501/716. Specifications • Dia Metric: 15.9 • Dia Imperial: 5/8 • Dia2 Metric: 5.55 • Overall Length Metric: 90

BiM Progressor Hole Saw offers 2x longer lifetime than predecessorFeatures:- Redesigned with Bi-Metal with 8% cobalt alloy for increased durability- Enhanced progressive tooth strip enables faster cut more→s- For use with the Bosch Power Change Plus keyless arbor: offering accuracy and robustness.- Suitable for multipurpose useSpecifications:- Diameter mm: 127- Diameter inches: 5- Working length mm: 44

Lenox Diamond hole saws are designed to cut more holes in less time. They are durable and long lasting, with oversized slots for quick removal of waste material. Specifications • Diameter: 29mm & more→bull; Compatible Arbors: 2L, 3L, 6L, 7L Features and Benefits • Brazed edge lasts longer in tiles and stone • Robust design for greater durability in tough applications • Low torque, little pressure required • Oversized slots for easy plug removal Contents • Hole Saw only • No Arbor or Pilot Drill (see specifications for compatible arbors)

They are designed to drill and coutersink simultaneously, a wide variety of materials. Supplied with a HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. The TCT version is used more→for plywood, particle boards and plastics (abrasive). Use at drilling speeds only. Not suitable for ferrous or non ferrous metals. Please ensure drill flutes are aligned with flutes of countersink. For replacement Twist Drills, use slow spiral type e.g. Refs 501/18 to 501/716. Specifications • Dia Metric: 12.7 • Dia Imperial: 1/2 • Dia2 Metric: 3.2 • Overall Length Metric: 65

They are designed to drill and coutersink simultaneously, a wide variety of materials. Supplied with a HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. The TCT version is used more→for plywood, particle boards and plastics (abrasive). Use at drilling speeds only. Not suitable for ferrous or non ferrous metals. Please ensure drill flutes are aligned with flutes of countersink. For replacement Twist Drills, use slow spiral type e.g. Refs 501/18 to 501/716. Specifications • Dia Metric: 15.9 • Dia Imperial: 5/8 • Dia2 Metric: 6.35 • Overall Length Metric: 102

The Deep Cut Bi-Metal Hole saws combine the aggressive tooth form from our previous Dual Pitch Hole Saws, with the new extra cobalt HSS teeth to provide enhanced heat and wear resistance. Featuring a more→10mm increase in hole saw depth and aggressive material penetration and kerf clearance, it is the complete multi-purpose hole saw to penetrate deep into metals, wood, plastic, plaster and other materials. Aggressive material penetration and kerf clearance. Ideal for solid materials or tubes of a wall thickness greater than 3mm. 51mm hole saw depth improves cutting performance on tubes, particularly where there is a need to cut through both sides of the tube. New tooth material for enhanced heat …

Bahco Superior™ Multi Construction Holesaws have carbide tips and are capable of cutting through brick and ceramic tiles, laminate, fibreglass and hardwood. The tooth tips consist of a carbide r more→ound rod which is fusion welded to the back material, the tip is then ground to its final shape with a 5° positive cutting angle. They have a low friction coating that minimises heat generation and wide gullets for effective chip removal. They fit all power drills, both stationary and portable.Bahco Multi Construction Holesaw 3833-111-C Carded Size: 111mm.Additional Information:• Size (mm): 111• Material: TCT

This Starrett Holesaw Kit is ideal for cutting stainless and mild steel sheeting, plasterboard, wood and thin plastics. The holesaws are constructed from heat-resistant, hardened steel with constant p more→itch teeth for exceptionally smooth cuts. Completely assembled ready for use. A safety stop collar at the base of the holesaw prevents travel beyond the holesaw depth. Supplied in a plastic carry case with the following sizes: 20, 25 and 32mm.Additional Information:• Material: Bi-Metal• Pitch: Constant Features and Benefits • Integrated hex shank arbors • Optimised for cordless tools • Requires less energy and saves battery power • Safety stop prevents drilling beyond …

Cuts the Hardest Tiles - The Diamond for Hard Ceramics Hole Saw cuts through the hardest tiles. Its diamond coating gives this hole saw durability on very strong tiles made from all types of ceramic m more→aterials. In addition, the thin cutting edge allows for rapid, clean cuts. Use this hole saw when cutting through wall and floor tiles. It is suitable for use with corded and cordless drill drivers. The Diamond for Hard Ceramics Hole Saw features Bosch´s unique power-change adapter with the fastest arbour system on the market. It allows for locking and unlocking the hole saw and pilot drills in one click. For use with the Bosch Power Change Plus keyless arbor: offering accuracy and robustness. …

Lasts up to 50x longer than HCS hole saw in tough materials - Cutting holes in brick, soft tiles and drywall is essential for plumbers and electricians on a building site or during renovation work. Fe more→w hole saws can withstand this kind of work in a mixture of tough construction materials, but the EXPERT Construction Material can. This one hole saw serves, and lasts, for many jobs. With just a few huge carbide teeth on its steel body, the EXPERT Construction Material delivers a real bite. Its large slots are optimised for fast chip removal, so it eats through anything from brick to wood and particle boards, fast. Bosch Carbide Technology is an optimum mix of the hardest metals, and ensures an …

Diamond Ceramic Mini Holesaws have a tough braze bonded diamond edge and durable alloy body, this gives these holesaws an extremely long lifespan. The round shank is suitable for use with cordless pow more→er drills only. Minimal water cooling is needed, simply dip in water before starting cut. Dip in water every 5 seconds during cutting for optimal life. Easy to start with no guide drill required. They will easily cut through porcelain tile, ceramic tile, granite, marble, slate, glass, cast iron, brick/block (lightweight), plasterboard, cement board, fibreglass, carbon fibre, composites and stucco.FAITDSETPRO, 4 Piece: 5, 6, 8 and 10mm. Features: Round shank for use with cordless power drills only …

• Supplied with hex drive adaptor for matched balance and extractor drift. • Thick wall body with multi slot extraction and 8mm high diamond segments. • High-speed drilling when used on lightweight bu more→ilding material such as; soft stone, facing bricks, breeze blocks and insulation blocks. (Not suitable for reinforced or non-reinforced concrete.) • For dry drilling only. • Supplied with integral hex shanks.Supplied with hex drive adaptor for matched balance and extractor drift. Thick wall body with multi slot extraction and 8mm high diamond segments. High-speed drilling when used on lightweight building material such as; soft stone, facing bricks, breeze blocks and insulation blocks. (Not suit…

The IRWIN bi-metal holesaws have been designed for the professional and made to provide long-lasting performance for use in general construction, electrical installation, plumbing, heating, ventilatio more→n, and remodelling applications. The sharp, variable tooth (4-6 pitch) design provides a faster cutting action and enhanced performance in a variety of materials and cutting applications. The bi-metal construction and the electron beam welded teeth give the user a stronger, longer-lasting blade. The IRWIN holesaw range is available from sizes 14 mm (9/16in) to 152 mm (6in), with a line up of high-quality arbors and a pilot drill to cover all application requirements. Cuts a variety of materials …

Core Drill Made Of Heavy-Duty High Speed Steel. Suitable For Steel (Such As T-Brackets, Large Sheets), Cast Iron, Non-Ferrous And Light Metals.For Use In Magnetic-Stand And Pillar Drilling Machines Wi more→th Morse Taper Retainer. In Connection With Ruko Arbor Holders No. 108 302 / 108 303, With Ruko Easylock No. 108 312 / 108 313 Or A Weldon Direct Shank Such As The Ruko Magnetic-Stand A10 Drill.Specifications:- Material: Hss- Surface: Bright- Cutting Direction: Right Hand Cut- Shank Weldon: Shank- Cutting: Depth 30,0 Mm- Total Length: L1 63,0 Mm- Shank Ø: 19,0 Mm- For Machines: A10 / Ru25 / Ru40

Bahco Sandflex® holesaws are made for high precision cutting of holes from 14 mm to 152 mm diameter in all sawable materials up to 38 mm thick. Suitable for use in portable electric or pneumatic t more→ools, and in a wide variety of drilling, boring, milling and other machine tools. All saws have varipitch (4-6tpi) blades.Cutting edges are in high speed steel for extra hardness, with welded seams for accuracy of cut, and heat-treated bodies for maximum strength.Size: 111 mm. Arbors to suit (available separately). Code Holesaw Size ShankBAH3834930 930 14-30 mm 3/8 Inch (8.5mm).BAH38341130 1130 14-30 mm 7/16 Inch (11.1mm).BAH38349100 9100 32-100 mm 3/8 Inch (8.5mm).BAH383411152 11152 32-210 mm 1/2 …

C Form shank
Suitable for use on wood, ferrous and non-ferrous
3 cutters and large flutes
6.3 x 45 5nn shank, 8.3 x 50 6mm shank, 10.4 x 50 6mm shank, 12.4 x 56 8mm shank, 16.5 x more→60 10mm shank, 20.5 x 63 10mm shank

This diamond core drill bit has been manufactured for heavy duty drilling applications through the toughest construction materials, including brick, masonry & concrete. Precision machined to withstand more→immense stress, the bit features highly concentrated diamonds & an extremely tough premium grade solid steel barrel, for increased drilling speed & an extended lifetime. This drill bit can be used in conjunction with SDS Plus machines & other fitting systems if used with the appropriate adaptor. Use a professional standard electric drill with a motor of at least 850W for heavy duty drilling applications - cordless models are not suitable. Applications:Recommended for the following materials: Medium …

High performance hole saws for drilling small diameter holes in non-metallics. The ideal solution for the toughest cutting situations. Featuring a diamond coated cutting edge permanently bonded to a t more→ough steel body, the Starrett Diamond Grit hole saw provides the necessary clearance for cutting at high speeds. Rapid cutting solution for non-metallics. Small diameter hole saws are perfect for kitchen and bathroom installations. Smooth surface finish, ideal when cutting glass and ceramics. Supported by a comprehensive range of arbors with carbide tipped pilot drills. The ultimate hole saw for hard-to-cut materialsTeeth Type: Synthetic diamond gritCountry of Origin: CN Specifications Diameter …

Clarkson 02PM/04PM long series multi flute end mills. Made from M42 High Speed Steel with 8% cobalt. Sizes 3.0mm - 20.0mm: Four Flutes Sizes 22.0mm - 38.0mm: Six Flutes Sizes 40.0mm - 50.00mm: Eight F more→lutes BS 122/4. Specifications • Milling Diameter: 18mm • Shank Diameter: 16mm • Length of Cut: 70mm • Overall Length: 115mm • Square End Helix Angle: 30° Features and Benefits • Premium grade M24 High Speed Steel with 8% cobalt (HSS Co8) • Screwed shank to BS122/4 • Multidirectional

Cuts the Hardest Tiles - The Diamond for Hard Ceramics Hole Saw cuts through the hardest tiles. Its diamond coating gives this hole saw durability on very strong tiles made from all types of ceramic m more→aterials. In addition, the thin cutting edge allows for rapid, clean cuts. Use this hole saw when cutting through wall and floor tiles. It is suitable for use with corded and cordless drill drivers. The Diamond for Hard Ceramics Hole Saw features Bosch´s unique power-change adapter with the fastest arbour system on the market. It allows for locking and unlocking the hole saw and pilot drills in one click. For use with the Bosch Power Change Plus keyless arbor: offering accuracy and robustness. …

Clarkson 02PM/04PM long series multi flute end mills. Made from M42 High Speed Steel with 8% cobalt. Sizes 3.0mm - 20.0mm: Four Flutes Sizes 22.0mm - 38.0mm: Six Flutes Sizes 40.0mm - 50.00mm: Eight F more→lutes BS 122/4. Specifications • Milling Diameter: 17mm • Shank Diameter: 16mm • Length of Cut: 67mm • Overall Length: 115mm • Square End Helix Angle: 30° Features and Benefits • Premium grade M24 High Speed Steel with 8% cobalt (HSS Co8) • Screwed shank to BS122/4 • Multidirectional

Tungsten Carbide Tipped (TCT) Multi Purpose hole saws feature a unique tooth set for an ultra-aggressive, high performance cutting of non-metallics. Rapid, heat-free stock removal of wood, MDF, plasti more→cs, and ceramic tiles, with a 54mm (2.1/8") cutting depth. Power through wood, MDF, plastics, plasterboard and ceramic wall tiles up to five times faster than a bi-metal hole saw. Carbide Tipped teeth for outstanding cutting performance and product durability. Cutting depth of 54mm (2.1/8”). Smooth cut with minimal heat build up. Suitable for use in mains and battery powered tools. Special arbors featuring extended length pilot drills are availableTeeth per Inch (25mm): 1Teeth Type: Tungsten Carbide Ti…