Diamond Core Bits & Milling Cutters

These two wing Tungsten Carbide Tipped slotting cutters are ideal for grooving and rebating operations. A 12.7mm diameter bearing is supplied with every cutter giving a 9.5mm groove depth. Depth of cu more→t can be changed by purchasing alternative bearing sizes. Easy to set-up and use. Hex key is supplied. N.B. The grooving section of this tool cannot be detached from the shank. Specifications • Shank Diameter: 1/4 • Dia Metric: 31.8 • Dia Imperial: 1 1/4 • Cut Length Metric: 3.2 • Cut Length Imperial: 1/8 • Overall Length Metric: 62.5 • Bearing Dia Metric: 12.7 • Rebate Metric: 10

Lip and Spur - Short series. These slow spiral TCT drills can be used in drilling machines or portable routers. Suitable for use in the DeWalt DE6252 Dovetail Jig. For drilling machines or routers. S more→pecifications • Shank Diameter: 1/4 • Dia Metric: 10 • Overall Length Metric: 70

Tungsten Carbide Tipped (TCT) Multi Purpose hole saws feature a unique tooth set for an ultra-aggressive, high performance cutting of non-metallics. Rapid, heat-free stock removal of wood, MDF, plasti more→cs, and ceramic tiles, with a 54mm (2.1/8") cutting depth. Power through wood, MDF, plastics, plasterboard and ceramic wall tiles up to five times faster than a bi-metal hole saw. Carbide Tipped teeth for outstanding cutting performance and product durability. Cutting depth of 54mm (2.1/8”). Smooth cut with minimal heat build up. Suitable for use in mains and battery powered tools. Special arbors featuring extended length pilot drills are availableTeeth per Inch (25mm): 1Teeth Type: Tungsten Carbide Ti…

These two wing Tungsten Carbide Tipped slotting cutters are ideal for grooving and rebating operations. A 12.7mm diameter bearing is supplied with every cutter giving a 9.5mm groove depth. Depth of cu more→t can be changed by purchasing alternative bearing sizes. Easy to set-up and use. Hex key is supplied. N.B. The grooving section of this tool cannot be detached from the shank. Specifications • Shank Diameter: 8 mm • Dia Metric: 31.8 • Dia Imperial: 1 1/4 • Cut Length Metric: 4 • Cut Length Imperial: 5/32 • Overall Length Metric: 63 • Bearing Dia Metric: 12.7 • Rebate Metric: 10

Precise fit and long service life thanks to high-grade carbide tips, optimised cutting geometry and a precision-ground finish. Features and Benefits • For routing with all common power tool bran more→ds. • Safety note: Please always wear protective goggles, a dust mask and hearing protection when using these sheets. Specifications Contents: 1 rounding over bit with ball bearing: Ø 21.8, R 6.3, L 13.5 mm 1 core box bit: Ø 12.7, R 6.3, L 12.7 mm 3 straight bits: Ø 8 / 12 / 12.7, L 19.7 mm 1 edge forming bit with ball bearing: Ø 25, R 4.5, L 16.3 mm Packaging: Plastic box with sticker with Euro hole Dimensions (lxwxh): 188 x 108,6 x 48,4mm Weight: 0,3kg

Lasts up to 50x longer than HCS hole saw in tough materials - Cutting holes in brick, soft tiles and drywall is essential for plumbers and electricians on a building site or during renovation work. Fe more→w hole saws can withstand this kind of work in a mixture of tough construction materials, but the EXPERT Construction Material can. This one hole saw serves, and lasts, for many jobs. With just a few huge carbide teeth on its steel body, the EXPERT Construction Material delivers a real bite. Its large slots are optimised for fast chip removal, so it eats through anything from brick to wood and particle boards, fast. Bosch Carbide Technology is an optimum mix of the hardest metals, and ensures an …

Rotabroach mini cutters are designed for use in standard drill chucks and deliver clean, burr-free holes with minimum power consumption, making them ideal for use with cordless machines. Sizes 6mm to more→20mm are suitable for use in 3/8" or 1/2" drill chucks. Sizes 21mm and above are suitable for 1/2" drill chucks only. For information on the arbor & pilot drill assembly needed for your requirements, please see the attached PDF below. Complete kits are also available (RK604 and RK603) Features & Benefits • Rotabroach Mini Cutters cut clean, burr-free holes in seconds • The professional solution for cutting holes in sheet metal, pipes and plastics • Precision ground teeth and flutes …

Trend Snappy 12.7mm diameter TCT countersink - with adjustable drill 12.7mm diameter countersink with clearance drill designed for Metric screws up to 6mm diameter shank. The perfect, fast swap acc more→essory for clean, consistent finishes." TCT cutting tips for assured, long life performance in all timbers and abrasive timber based materials including ply, MDF and chipboard. Fitted with high quality 5mm diameter replaceable HSS (High Speed Steel) drill Ideal for clearance holes in metric screws up to 6mm gauge. Easily adjustable drill length for different timber thicknesses and fast alignment. Can be used to make countersinks and can also be used for counterbores; ideal for use with Trend …

Assortment of router bits with T.C.T. heads to suit most applications. Supplied in display case.

The IRWIN bi-metal holesaws have been designed for the professional, and made to provide long lasting performance for use in general construction, electrical installation, plumbing, heating and ventil more→ation, and remodelling applications. The sharp, variable tooth (4-6 pitch) design provides a faster cutting action and enhanced performance in a variety of materials and cutting applications. The bi-metal construction and the electron beam welded teeth give the user a stronger, longer lasting blade. The IRWIN holesaw range is available from sizes 14 mm (9/16 Inch) to 152 mm (6 Inch), with a line up of high quality arbors and a pilot drill to cover all application requirements. Cuts a variety of …

For use with the Leigh Dovetail Jig. This cutter has an extra long shank for cutting dovetail pins. Specifications • Shank Diameter: 1/4 • Dia Metric: 8 • Cut Length Metric: 26 • more→Overall Length Metric: 70

Tungsten carbide tipped dowel drill with V point . Suitable for drilling tear free through holes in natural wood and man-made boards (including paper/plastic coated and veneered). Drills have a cylind more→rical shank with flat and length adjusting screw. For use on automatic and point-to-point boring machines. Specifications • D=8 mm • C=25 mm • OL=57.5 mm • Shank Diameter=10x25 mm • Rotation=Right hand

The CorePlus Diamond Holesaw provides professional, fast, clean cutting on a wide range of materials, from hard porcelain tile and stone to cement board and fibreglass. Leading-edge vacuum brazing tec more→hnology ensures the diamonds stay bonded for extremely long life. Minimal water cooling is required when cutting hard tile, stone and glass. Use fully dry on other materials. Fluid, snag-free cutting, no secondary finishing required. The ultra-thin kerf generates a low amount of torque for faster cutting and extended battery life.

Trend Snappy 12.7mm diameter TCT countersink - with adjustable drill 12.7mm diameter countersink with clearance drill designed for Metric screws up to 5mm diameter shank. The perfect, fast swap acc more→essory for clean, consistent finishes." TCT cutting tips for assured, long life performance in all timbers and abrasive timber based materials including ply, MDF and chipboard. Fitted with high quality 5mm diameter replaceable HSS (High Speed Steel) drill Ideal for clearance holes on metric screws up to 6mm gauge. Easily adjustable drill length for different timber thicknesses and fast alignment. Can be used to make countersinks and can also be used for counterbores; ideal for use with Trend …

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Sp more→ecifications • Shank Diameter: 1/2 • Dia Metric: 20 • Cut Length Metric: 25 • Cut Length Imperial: 1 • Overall Length Metric: 66.5

Smooth Cutting - The bi-metal Hole Saw offers smooth cutting through various materials. The tooth configuration (Vario tooth strip) is ideal for gliding through material to provide smooth cuts. Made o more→f bi-metal HSS (high-speed steel) containing 8% cobalt alloy, this hole saw has less risk of tooth breakage and higher heat resistance for long-lasting cutting. Use this hole saw when cutting through wood, metal and plastics The bi-metal Hole Saw fits all standard adapters on the market. Fits threaded standard adapter. Features and Benefits • Smooth Cutting • Bi-metal Hole Saw offers smooth cutting through various materials • Tooth configuration (Vario tooth strip) is ideal for gliding …

Core drill made of heavy-duty high speed steel. Suitable for steel (such as T-brackets, large sheets), cast iron, non-ferrous and light metals.For use in magnetic-stand and pillar drilling machines wi more→th morse taper retainer. In connection with RUKO arbor holders no. 108 302 / 108 303, with RUKO EasyLock no. 108 312 / 108 313 or a weldon direct shank such as the RUKO magnetic-stand A10 drill.Specifications: - Ø: 20,0 mm- Total length L1: 63,0 mm- Shank Ø: 19,0 mm- for machines: A10 / RU25 / RU40- Material: HSS- Cutting direction: right hand cut- Shank: Weldon shank- Cutting depth: 30,0 mm- Weight: 0,11200 KG

By overseeing the entire manufacturing process from start to finish, Freud guarantees the highest quality, most advanced products in the industry. Precise shear and hook angles give a smooth cut End o more→f bit relief allows for fast plunging Cuts all composite materials, plywoods, hardwoods, and softwoods. Micrograin carbide tips with titanium ensure a razor-sharp, high durability router bit.

Used for trimming plastic or plywood overlays. Also for copy profiling with a template. Specifications • Shank Diameter: 1/2 • Dia Metric: 19.1 • Dia Imperial: 3/4 • Cut Length M more→etric: 25 • Cut Length Imperial: 1 • Overall Length Metric: 76.5 • Bearing Dia Metric: 15.9 • Angle: 90

The Lenox T3 Bi Metal Speed Slot Hole Saw features a patented vari-tooth design which optimises cutting for fast cuts and long tool life. The increased wall thickness improves durability and minimises more→tooth loss, optimised tooth design penetrates metal with ease. Features & Benefits • 50% longer life. 2X more durable • 10% thicker wall adds strength and durability • Improved metal cutting performance • Increased wall thickness improves durability and minimizes tooth loss • Optimized tooth design penetrates metal with ease • Fast, efficient cutting in wood • Larger, sharper teeth remove more wood for fast cutting • Easy plug removal • Speed Slot staircase …

Used for trimming plastic or plywood overlays. Also for copy profiling with a template. Specifications • Shank Diameter: 1/4 • Dia Metric: 19.1 • Dia Imperial: 3/4 • Cut Length M more→etric: 25 • Cut Length Imperial: 1 • Overall Length Metric: 78.5 • Overall Length Imperial: 3 7/64 • Bearing Dia Metric: 15.9 • Angle: 90

Two flutes give a clean finish to cut edges. Specifications • Shank Diameter: 1/4 • Dia Metric: 2 • Dia Imperial: 5/64 • Cut Length Metric: 5 • Overall Length Metric: 43