Diamond Core Bits & Milling Cutters

Used to slot and trim low melting point plastics such as ABS, Styrene and PVC. For maximum life these cutters are Solid Carbide. Two flute for fine finish. Specifications • Shank Diameter: 1 more→/4 • Dia Metric: 6.3 • Dia Imperial: 1/4 • Cut Length Metric: 25 • Cut Length Imperial: 63/64 • Overall Length Metric: 65

Bi-Metal Cobalt Holesaws with precision set teeth for aggressive material penetration and swarf clearance. This also provides a smooth, fast cutting action. Manufactured from bi-metal material with a more→8% cobalt content for increased heat and wear resisitance for greater product life. Ideal for use on a wide variety of materials including: stainless steel, steel, aluminium, sheet metal, mild metal, non-ferrous metals, cast iron, soft/hard wood and PVC. Suitable for use in most variable speed power drills. Cutting Depth: 38mm Features: Variable pitch with HSS teeth Ideal for cutting wood, chipboard, plywood, plastics, plasterboard & non-ferrous metal Ideal for cutting wood, chipboard, plywood, …

Expert Construction Material For Long Life Cutting Brick And Particle Board Cutting Holes In Brick, Soft Tiles And Drywall Is Essential For Plumbers And Electricians On A Building Site Or During Renov more→ation Work. Few Hole Saws Can Withstand This Kind Of Work In A Mixture Of Tough Construction Materials, But The Expert Construction Material Can. This One Hole Saw Serves, And Lasts, For Many Jobs. The Bosch Expert Construction Material Hole Saw Is A Robust Hole Saw That Is Very Useful On The Building Site And Offers Great Value To Professionals Because It Is So Long-Lasting.Features:- Long Life Cutting Holes In Brick And Particle Board- Extreme Durability Is Built In With Bosch Carbide Technology- …

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications • Shank Diam more→eter: 1/4 • Dia Metric: 12.55 • Dia Imperial: 31/64 • Cut Length Metric: 25.4 • Overall Length Metric: 67

HSS Cobalt Hole Saw 127mm 5in~ Premium grade 8 % Cobalt alloy steel construction for an extended working life~ Excellent wear resistance even at high temperatures~ For fast and clean cutting of metal, more→wood, aluminium, steel, cast iron, brass and plastics~ Variable pitch teeth for rapid cutting action, efficient swarf removal and reduced vibrationTechnical Specification:CE Certified: NoConflict Materials Content : NoREACH Content Status SVHC Free or Contains SVHC: SVHC freeRoSH Regs Within Scope: NoBatteries Included: NoBattery Powered: NoCharger Included: NoMains Powered: NoDimensions: Length: 127mm x Height: 43mmWeight: 0.613KgWarranty: 12 months. C.K products are guaranteed for 1year against …

HSS Three Flute 90° Countersink. Specifications • Nominal Diameter: 31.0mm • Shank Diameter: 12mm • Overall Length: 71mm • Capacity: 4.2mm - 31.0mm Features and Benefits &bull more→; Produces countersinks for cap screws • Self centering and chatter free • Can be used for chamferring • DIN 335C

Smooth Cutting - The bi-metal Hole Saw offers smooth cutting through various materials. The tooth configuration (Vario tooth strip) is ideal for gliding through material to provide smooth cuts. Made o more→f bi-metal HSS (high-speed steel) containing 8% cobalt alloy, this hole saw has less risk of tooth breakage and higher heat resistance for long-lasting cutting. Use this hole saw when cutting through wood, metal and plastics The bi-metal Hole Saw fits all standard adapters on the market. Fits threaded standard adapter. Features and Benefits • Smooth Cutting • Bi-metal Hole Saw offers smooth cutting through various materials • Tooth configuration (Vario tooth strip) is ideal for gliding …

Template thickness should be 5mm thicker than cut length of cutter. Can be used to rout both tenons and housings. Specifications • Shank Diameter: 1/2 • Dia Metric: 19.1 • Dia Imperi more→al: 3/4 • Cut Length Metric: 11.1 • Overall Length Metric: 55 • Bearing Dia Metric: 19.1

Template thickness should be 5mm thicker than cut length of cutter. Can be used to rout both tenons and housings. Specifications • Shank Diameter: 1/4 • Dia Metric: 19.1 • Dia Imperi more→al: 3/4 • Cut Length Metric: 11.1 • Overall Length Metric: 59 • Bearing Dia Metric: 19.1

The strong, high performance triple chip Tungsten Carbide Tipped hole saw provides long life when cutting difficult and abrasive materials, such as wood and PVC. It offers a cost effective solution fo more→r cutting through nail embedded wood, or virtually any wood and metal combination, reinforced concrete and fibreglass. Leaves high quality surface finish on entry and exit and provides a smooth cut when cutting traditional lathe and plaster. Tungsten Carbide Tipped teeth for outstanding cutting performance and product durability. Will cut nail embedded wood or virtually and wood and metal combination, such as wooden doors with metal fascia panels. Cutting depth of 41mm (1.5/8""). Suitable for use …

Purpose made for stair housing jigs. Ensures tight fit of tread in string. Specifications • Shank Diameter: 1/2 • Dia Metric: 13.5 • Cut Length Metric: 20 • Overall Length Metr more→ic: 65 • Angle: 95

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications • Shank Diam more→eter: 1/2 • Dia Metric: 12 • Dia Imperial: 15/32 • Cut Length Metric: 38 • Overall Length Metric: 80

Self-guiding cutters for rounding over edges do not require a side fence. They are supplied with two bearings. Use the larger bearing for a round-over. If the cutter is lowered, a top quirk can more→be produced. Bullnose mouldings can also be produced by taking a second pass from the opposite side of the workpiece. Specifications • Shank Diameter: 8 mm • Dia Metric: 22 • Dia Imperial: 7/8 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 64.5 • Bearing Dia Metric: 9.5 • Radius 1 Metric: 4.8 • Radius 1 Imperial: 3/16

High performance hole saws for drilling small diameter holes in non-metallics. The ideal solution for the toughest cutting situations. Featuring a diamond coated cutting edge permanently bonded to a t more→ough steel body, the Starrett Diamond Grit hole saw provides the necessary clearance for cutting at high speeds. Rapid cutting solution for non-metallics. Small diameter hole saws are perfect for kitchen and bathroom installations. Smooth surface finish, ideal when cutting glass and ceramics. Supported by a comprehensive range of arbors with carbide tipped pilot drills. The ultimate hole saw for hard-to-cut materialsTeeth Type: Synthetic diamond gritCountry of Origin: CN Specifications Diameter …

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications • Shank Diam more→eter: 1/4 • Dia Metric: 14 • Dia Imperial: 35/64 • Cut Length Metric: 25 • Overall Length Metric: 56

HSS Three Flute 90° Countersink. Specifications • Nominal Diameter: 30.0mm • Shank Diameter: 12mm • Overall Length: 71mm • Capacity: 4.2mm - 30.0mm Features and Benefits &bull more→; Produces countersinks for cap screws • Self centering and chatter free • Can be used for chamferring • DIN 335C

Shank mounted bearing profilers are ideal for template guidance. Use for rebating and trimming edges only. Extra care must be taken to avoid cutter breakage. Specifications • Shank Diameter: more→1/4 • Dia Metric: 15.9 • Dia Imperial: 5/8 • Cut Length Metric: 25 • Cut Length Imperial: 1 • Overall Length Metric: 71 • Bearing Dia Metric: 16 • Bearing Dia Imperial: 5/8 • Angle: 90

They are designed to drill and coutersink simultaneously, a wide variety of materials. Supplied with a HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. The TCT version is used more→for plywood, particle boards and plastics (abrasive). Use at drilling speeds only. Not suitable for ferrous or non ferrous metals. Please ensure drill flutes are aligned with flutes of countersink. For replacement Twist Drills, use slow spiral type e.g. Refs 501/18 to 501/716. Specifications • Dia Metric: 15.9 • Dia Imperial: 5/8 • Dia2 Metric: 4.76 • Overall Length Metric: 85

Profiler with shank mounted bearing guides. For use with router mounted above or below a table when following a template. For profiling and rebating applications only. Not for plunge cutting/groo more→ving. A 3mm maximum overlap should be left before trimming. They are ideal for template making. Has a shorter cutter length for use on thin boards. Specifications • Shank Diameter: 1/4 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 6.35 • Overall Length Metric: 60 • Bearing Dia Metric: 12.7

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications • Shank Diam more→eter: 1/2 • Dia Metric: 12 • Dia Imperial: 15/32 • Cut Length Metric: 32 • Overall Length Metric: 73

Trend Craft Pro 1/4in shank bearing guided round over router cutter - 3/16in radius Two Flute Carbide tips. Bearing guided classic round over detail for edge detailing on curved and straight work wit more→h additional bearing for quirked Ovolo detail option. Two flute carbide TCT tips for cleaner cutting edges and fast clearance of waste in all timber and timber based materials. 3/16in radius for matched imperial replication work, ideal for lighter roundover, Ovolo or bullnosing detail work on smaller furniture work. PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. 1/4in shank for easy control in smaller routers with 'K'mark shank to ensure safe …

• One of a comprehensive range of Premier Hand Tools, suitable for daily professional use.• Manufactured from Chrome Vanadium steel with a fully polished finish for corrosion resistance.• Twelve 3/8"S more→q drive sockets and four double end spanners covering TRX-Star* fixings E6-E24.• Knurled ring on sockets for extra grip with greasy fingers.• Supplied in storage tray.• Lifetime guarantee*.Manufactured from Chrome Vanadium steel with a fully polished finish for corrosion resistance. Four double end spanners and 12 3/8"Sq drive sockets covering TRX-Star* fixings E6-E24. Knurled ring on sockets for extra grip with oily fingers. Supplied in storage tray.• Manufactured from Chrome Vanadium steel with a f…