Diamond Core Bits & Milling Cutters

A one piece set. Parts are inter-changed on the arbor to alter the set-up. For use with router table only. Specifications • Shank Diameter: 1/2 • Dia Metric: 41 • Cut Length Metric: 6. more→35 • Overall Length Metric: 75 • Bearing Dia Metric: 22

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications • Shank Diam more→eter: 1/4 • Dia Metric: 13 • Dia Imperial: 33/64 • Cut Length Metric: 26 • Overall Length Metric: 57

HSSCo 3 Flute 90° countersink. Specifications • Nominal Diameter: 31.0mm • Shank Diameter: 12mm • Overall Length: 71mm • Capacity: 4.2mm - 31.0mm Features and Benefits • more→Produces countersinks for cap screws • Self centering and chatter free • Can be used for chamferring • DIN 335C

High performance hole saws for drilling small diameter holes in non-metallics. The ideal solution for the toughest cutting situations. Featuring a diamond coated cutting edge permanently bonded to a t more→ough steel body, the Starrett Diamond Grit hole saw provides the necessary clearance for cutting at high speeds. Rapid cutting solution for non-metallics. Small diameter hole saws are perfect for kitchen and bathroom installations. Smooth surface finish, ideal when cutting glass and ceramics. Supported by a comprehensive range of arbors with carbide tipped pilot drills. The ultimate hole saw for hard-to-cut materialsTeeth Type: Synthetic diamond gritCountry of Origin: CN Specifications Diameter …

Two fluted tungsten carbide weatherseal groover for use on natural timbers and manmade boards. The cutter is non stick coated to reduce resin build up. Neatly cuts grooves on doors or frames to accep more→t a weatherseal. Specifications • Shank Diameter: 1/2 • Dia Metric: 36 • Cut Length Metric: 2.5 • Overall Length Metric: 80 • Bearing Dia Metric: 22

Supplied with extra 1/2 inch bearing for removing the lower quirk. Specifications • Shank Diameter: 1/4 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metri more→c: 64.5 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 5 • Radius 2 Metric: 4

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications • Shank Diam more→eter: 1/4 • Dia Metric: 15.9 • Dia Imperial: 5/8 • Cut Length Metric: 25 • Overall Length Metric: 57

Two fluted tungsten carbide weatherseal groover for use on natural timbers and manmade boards. The cutter is non stick coated to reduce resin build up. Neatly cuts grooves on doors or frames to accep more→t a weatherseal. Specifications • Shank Diameter: 1/2 • Dia Metric: 36 • Cut Length Metric: 2 • Overall Length Metric: 80 • Bearing Dia Metric: 22

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications • Shank Diam more→eter: 1/2 • Dia Metric: 15.9 • Dia Imperial: 5/8 • Cut Length Metric: 25 • Overall Length Metric: 66

HSSCo 3 Flute 90° countersink. Specifications • Nominal Diameter: 30.0mm • Shank Diameter: 12mm • Overall Length: 71mm • Capacity: 4.2mm - 30.0mm Features and Benefits • more→Produces countersinks for cap screws • Self centering and chatter free • Can be used for chamferring • DIN 335C

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications • Shank Diam more→eter: 1/2 • Dia Metric: 25.4 • Dia Imperial: 1 • Cut Length Metric: 19 • Overall Length Metric: 60

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications • Shank Diam more→eter: 1/2 • Dia Metric: 13 • Dia Imperial: 33/64 • Cut Length Metric: 26 • Overall Length Metric: 72

Attractive edge moulds. A full corner bead can be produced by making a second pass at 90 degrees. Specifications • Shank Diameter: 1/2 • Dia Metric: 31.9 • Dia2 Metric: 28.6 • C more→ut Length Metric: 22.5 • Overall Length Metric: 71 • Bearing Dia Metric: 16 • Radius 1 Metric: 7

The CB counterbores are extensively used for recessing bolt and screw heads. Supplied with a HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. TCT version is used for plywood, partic more→le boards and plastics (abrasive). Use a drilling speeds only. Not suitable for ferrous and non-ferrous metals. When setting-up, ensure flutes of drill are aligned with flute of counterbore. For replacement Twist Drills, use slow spiral type e.g 501/532 to 501/012. Specifications • Dia Metric: 12.7 • Dia Imperial: 1/2 • Dia2 Metric: 4.76 • Dia2 Imperial: 3/16 • Overall Length Metric: 84 • Type or Grade: TCT

A one piece set. Parts are inter-changed on the arbor to alter the set-up. For use with router table only. Specifications • Shank Diameter: 8 mm • Dia Metric: 41 • Cut Length Metric: 6 more→.35 • Overall Length Metric: 75 • Bearing Dia Metric: 22

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications • Shank Diam more→eter: 1/4 • Dia Metric: 25.4 • Dia Imperial: 1 • Cut Length Metric: 19 • Overall Length Metric: 51

Tungsten Carbide Tipped. Two flute cutter with a positive shear angle (down-cut) for fast cutting and fine finish. Ideal for grooving & trimming veneer finishes & laminated boards. Down cut feature more→stops break out on top edge. Has a 3 degree shear. Specifications • Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 50 • Overall Length Metric: 107

Ideally suited for cutting radiused edges at speed, as a side fence can be dispensed with. The guide bearing follows the vertical edge or template. Alternative bearing Ref. B127A creates a shallow ra more→dius. Specifications • Shank Diameter: 1/4 • Dia Metric: 28.5 • Cut Length Metric: 14.3 • Cut Length Imperial: 9/16 • Overall Length Metric: 64 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 9.5 • Radius 1 Imperial: 3/8

Rotabroach mini cutters are designed for use in standard drill chucks and deliver clean, burr-free holes with minimum power consumption, making them ideal for use with cordless machines. Sizes 6mm to more→20mm are suitable for use in 3/8" or 1/2" drill chucks. Sizes 21mm and above are suitable for 1/2" drill chucks only. For information on the arbor & pilot drill assembly needed for your requirements, please see the attached PDF below. Complete kits are also available (RK604 and RK603) Features & Benefits • Rotabroach Mini Cutters cut clean, burr-free holes in seconds • The professional solution for cutting holes in sheet metal, pipes and plastics • Precision ground teeth and flutes …

For veining, panelling, 'V' grooving, bevelling & chamfering. Specifications • Shank Diameter: 1/2 • Dia Metric: 38 • Dia Imperial: 1 1/2 • Cut Length Metric: 27 • Overall Le more→ngth Metric: 64 • Angle: 45

Attractive edge moulds. A full corner bead can be produced by making a second pass at 90 degrees. Specifications • Shank Diameter: 1/4 • Dia Metric: 31.9 • Dia2 Metric: 28.6 • C more→ut Length Metric: 22.5 • Overall Length Metric: 72.5 • Bearing Dia Metric: 16 • Radius 1 Metric: 7

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications • Shank Diam more→eter: 1/4 • Dia Metric: 20 • Dia Imperial: 25/32 • Cut Length Metric: 20 • Overall Length Metric: 53