Diamond Core Bits & Milling Cutters

The CB counterbores are extensively used for recessing bolt and screw heads. Supplied with a HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. TCT version is used for plywood, partic more→le boards and plastics (abrasive). Use a drilling speeds only. Not suitable for ferrous and non-ferrous metals. When setting-up, ensure flutes of drill are aligned with flute of counterbore. For replacement Twist Drills, use slow spiral type e.g 501/532 to 501/012. Specifications • Dia Metric: 12.7 • Dia Imperial: 1/2 • Dia2 Metric: 6.35 • Dia2 Imperial: 1/4 • Overall Length Metric: 100 • Type or Grade: TCT

Clarkson 10PM/13PM standard series two flute slot drills. Made from M42 High Speed Steel with 8% cobalt. Specifications • Milling Diameter: 23mm • Shank Diameter: 25mm • Length of Cut: more→25.5mm • Overall Length: 101.5mm • Square End Helix Angle: 30°

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications • Shank Diam more→eter: 1/2 • Dia Metric: 12 • Dia Imperial: 15/32 • Cut Length Metric: 63 • Overall Length Metric: 114

Ideally suited for cutting radiused edges at speed, as a side fence can be dispensed with. The guide bearing follows the vertical edge or template. Alternative bearing Ref. B127A creates a shallow ra more→dius. Specifications • Shank Diameter: 1/4 • Dia Metric: 34.9 • Cut Length Metric: 19.1 • Cut Length Imperial: 3/4 • Overall Length Metric: 69 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 12.7 • Radius 1 Imperial: 1/2

These specially designed machine bits have a specially designed form of scriber to allow use at high speeds. For recessing circular hinges. For accurate repetitive routing, a template and guide bush f more→itted to the router base should be used. Specifications • Shank Diameter: 1/2 • Dia Metric: 35 • Dia Imperial: 1 3/8 • Overall Length Metric: 60

Ideal for following template. It is advisable that the template is at least 5mm thicker than the cut length of the tool. Specifications • Shank Diameter: 1/4 • Dia Metric: 22 • Cut Len more→gth Metric: 10 • Cut Length Imperial: 25/64 • Overall Length Metric: 61.5 • Bearing Dia Metric: 22 • Radius 1 Metric: 2.4

RA116 Arbor for using Rotabroach mini cutters in standard jawed drill chucks. Includes pilot drill and washers. Specifications • Model; RA116 • Chuck Size: 1/2" • Cutter Diameters 6mm - 20mm

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Sp more→ecifications • Shank Diameter: 1/2 • Dia Metric: 28.5 • Dia Imperial: 1 1/8 • Cut Length Metric: 25 • Cut Length Imperial: 1 • Overall Length Metric: 67

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Sp more→ecifications • Shank Diameter: 1/2 • Dia Metric: 28 • Dia Imperial: 1 7/64 • Cut Length Metric: 25 • Cut Length Imperial: 1 • Overall Length Metric: 64

Shank mounted bearing profilers are ideal for template guidance. Use for rebating and trimming edges only. Extra care must be taken to avoid cutter breakage. Specifications • Shank Diameter: more→12 mm • Dia Metric: 19.1 • Dia Imperial: 3/4 • Cut Length Metric: 50 • Cut Length Imperial: 1 31/32 • Overall Length Metric: 94.5 • Bearing Dia Metric: 19.1 • Bearing Dia Imperial: 3/4 • Angle: 90

Bosch 2608584670 HSS-Bimetal Progressor Holesaw Kit 9 Piece The Bosch 9 Piece HSS-Bimetal Progressor Holesaw Kit contains 6 holesaws in sizes from 20mm to 64mm or 25/32 inch to 2.1/2 inch. Suited to c more→utting both wood and metal they are made with 8% Cobalt Alloy. Features:
- Progressor holesaw kit for wood and metal
- For the toughest demands - quickly and steadily through a wide variety of materials
- Progressive tooth strip for high performance and fast chip clearance
- HSS bi-metal with 8% cobalt alloy for extreme resilience and a long lifetime
- Power change adapter for a fast and safe attachment and release of the pilot drill bit and holesaw, with just one click
- The cutting …

Holesaws HSS, Bimetal.tg {border-collapse:collapse;border-spacing:0;}.tg td{font-family:Arial, sans-serif;font-size:14px;padding:10px 5px;border-style:solid;border-width:1px;overflow:hidden;word-break more→:normal;border-color:black;}.tg th{font-family:Arial, sans-serif;font-size:14px;font-weight:normal;padding:10px 5px;border-style:solid;border-width:1px;overflow:hidden;word-break:normal;border-color:black;}.tg .tg-s268{text-align:left}.tg .tg-0lax{text-align:left;vertical-align:top} Product Code Part Number A Weight mm " mm g 004500016 450 16 16 (5/8) 57 21 004500017 450 17 17 (11/16) 57 32 004500019 450 19 19 (3/4) 51 30 004500020 450 20 20 - 51 29 004500021 450 21 21 (13/16) 51 37 004500022 450 …

Lenox Diamond hole saws are designed to cut more holes in less time. They are durable and long lasting, with oversized slots for quick removal of waste material. Specifications • Diameter: 32mm & more→bull; Compatible Arbors: 2L, 3L, 6L, 7L Features and Benefits • Brazed edge lasts longer in tiles and stone • Robust design for greater durability in tough applications • Low torque, little pressure required • Oversized slots for easy plug removal Contents • Hole Saw only • No Arbor or Pilot Drill (see specifications for compatible arbors)

For accurate guiding of router, saws and jigsaws. Integral clamping jaws and a locking lever provide a quick way of clamping the guide batten. Ideal for holding and clamping work pieces. Aluminium more→extrusion incorporating T-slots. The clamps are fitted with a metric/imperial scale for setting lengths and stop positions. Scale can be positioned by removing 20mm of the self adhesive backing. Three lengths of clamp available 24 inch, 36 inch and 50 inch. Router not included. Patent No. US7,007,731. Specifications • Cut Length Metric: 915 • Cut Length Imperial: 36 • Type or Grade: Max clamp 915 mm

Bahco Sandflex® holesaws are made for high precision cutting of holes from 14 mm to 152 mm diameter in all sawable materials up to 38 mm thick. Suitable for use in portable electric or pneumatic t more→ools, and in a wide variety of drilling, boring, milling and other machine tools. All saws have varipitch (4-6tpi) blades.Cutting edges are in high speed steel for extra hardness, with welded seams for accuracy of cut, and heat-treated bodies for maximum strength.Size: 168 mm. Arbors to suit (available separately). Code Holesaw Size ShankBAH3834930 930 14-30 mm 3/8 Inch (8.5mm).BAH38341130 1130 14-30 mm 7/16 Inch (11.1mm).BAH38349100 9100 32-100 mm 3/8 Inch (8.5mm).BAH383411152 11152 32-210 mm 1/2 …

Lasts up to 50x longer than a BiMetal hole saw in tough materials - Most hole saws for wood and metal seem to work fine - until you hit a hardened nail or screw. Then they scream and smoke and grind u more→ntil their teeth are torn off, and you still only have half a hole. With its carbide teeth, the EXPERT Tough Material barely slows down when it hits metal – it cuts neatly through and keeps on cutting holes, time and again. Made with Bosch Carbide Technology, each tooth is an optimum grade of the hardest metal, laser welded and ground six times for the perfect cutting shape. This makes the Bosch EXPERT Tough Material Hole Saw ideal for tough jobs and all-round trades work: As well as wood and me…

For coves and part of a rule joint. Specifications • Shank Diameter: 1/2 • Dia Metric: 14 • Cut Length Metric: 18 • Overall Length Metric: 60 • Radius 1 Metric: 7

For drilling and slotting uPVC plastic. Cutters are designed to plunge and machine or mill lateral slots. Material should be securely clamped. Single flute straight. The long shanks are ideal for more→water slot routing. Specifications • Shank Diameter: 8 mm • Dia Metric: 5 • Cut Length Metric: 30 • Overall Length Metric: 100

Heavy duty padded bag for use with KWJ700, KWJ700S and KWJ750P worktop jigs 600 Denier Heavy Duty Polyester Coated Waterproof Nylon Outer PU Coated Waterproof Nylon Inner Closed Cell Polyethylene J more→iffy Foam Padding Polypropylene Webbing Straps Polypropylene Herringbone Webbing Edge Reinforcement Hook and Loop Flap Tool not included

Cutter is turned, milled and ground from a solid piece of Tungsten Carbide and provide the greatest durability when used under stress load conditions. Offers better plunge cutting characteristics tha more→n TCT. Many more re-sharpenings can be obtained from STC tools. A harder grade of carbide is used as the tool is not brazed. Single flute - faster feed rates. Single flute cutters should not be used in eccentric chucks. Specifications • Shank Diameter: 1/4 • Dia Metric: 6.3 • Dia Imperial: 1/4 • Cut Length Metric: 10

Worktop Jig Accessory for making fast, accurate angled worktop joints to accommodate out of square walls ADAPTABLE ANGLE RANGE Can be used for acute and obtuse wall angles up to 25 degrees out of squ more→are COMPATABILITY Works with Trend KWJ 750P Pro, KWJ 900P Pro, KWJ 700, KWJ 700S, KWJ 900 worktop jigs and jigs up to 12mm thick EASY SETUP Fast alignment to the worktop edge ensures correct backset position SIMPLE FOUR STEP PROCEDURE Measure, Mark, Clamp, Cut PRECISION FIT Front edge pivot point alignment ensures the backset is correctly set to match the female cut MULTI-PROFILE Works with any worktop edge profile from square edge to full bullnose QUALITY CONSTRUCTION Made from solid aluminium …

The CB counterbores are extensively used for recessing bolt and screw heads. Supplied with a HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. TCT version is used for plywood, partic more→le boards and plastics (abrasive). Use a drilling speeds only. Not suitable for ferrous and non-ferrous metals. When setting-up, ensure flutes of drill are aligned with flute of counterbore. For replacement Twist Drills, use slow spiral type e.g 501/532 to 501/012. Specifications • Dia Metric: 16 • Dia Imperial: 5/8 • Dia2 Metric: 6.35 • Dia2 Imperial: 1/4 • Overall Length Metric: 100 • Type or Grade: TCT

A range of small sized panelling cutters. Ideal for veining and fluting applications. Specifications • Shank Diameter: 1/4 • Dia Metric: 13 • Cut Length Metric: 12.5 • Overall Len more→gth Metric: 52.5 • Radius 1 Metric: 6

High performance hole saws for drilling small diameter holes in non-metallics. The ideal solution for the toughest cutting situations. Featuring a diamond coated cutting edge permanently bonded to a t more→ough steel body, the Starrett Diamond Grit hole saw provides the necessary clearance for cutting at high speeds. Rapid cutting solution for non-metallics. Small diameter hole saws are perfect for kitchen and bathroom installations. Smooth surface finish, ideal when cutting glass and ceramics. Supported by a comprehensive range of arbors with carbide tipped pilot drills. The ultimate hole saw for hard-to-cut materialsTeeth Type: Synthetic diamond gritCountry of Origin: CN Specifications Diameter …