Diamond Core Bits & Milling Cutters

Bosch 2608580804 HSS Electricians Holesaw Set 9 Piece Bosch has released this new high speed steel holesaw set specifically for Electricians. It features the sizes they use every day and come in a stu more→rdy plastic carry case. HSS Bi-Metal With 8% cobalt alloy for extreme resilience and long lifetime. For Drilling in steel and cast iron, structural steel, alloyed and unalloyed aluminium, bronze, copper, PVC, acrylic glass and wood. The cutting quality depends on the correct speed and the coolant used. Features:
- 9 piece holesaw set
- For the toughest demands
- Quickly and steadily through a wide variety of materials
- Designed to cut metal, mild steel, aluminium, plastic and plasterboard …

Regular length end mill with 3 flutes

Trend Two Flute Straight Cutters produce a cleaner finish than single flute cutters. Suitable for grooving, rebating, morticing, drilling and shallow lateral routing cuts such as recessing hinges. Cor more→ners will require a final trimming square with a hand chisel or a corner chisel. Suitable for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics.

Trend Bearing Guided Ovolo & Round Over Cutters are ideal for curved work. They can be used on natural timber, man-made particleboard and fibreboard. Popular uses include edging window frames, glazing more→bars, cabinets, tabletops, pencil rounds, trophies, shelves and fire surrounds. They can also be used to produce bullnose edge moulds. Supplied with two bearings 9.5mm and 12.7mm diameter. The larger bearing removes the quirk producing a round over profile.

Profilers with shank mounted bearings for guidance, for use with router mounted above or below a table when following a template. Bearing guided cutters are suitable for both straight and curved work. more→For profiling and rebating applications only. NOT for plunge, cutting or grooving. A 3 mm approximate overlap should be left before copy profiling, also when using plastic laminate always allow laminate adhesive to dry before trimming. This avoids clogging the guide bearing.

Self-guiding triple flute cutter. Extra fine trimming and longer life. For trimming of laminate or plywood overlay etc. A 2mm maximum overlap should be left before trimming. Specifications &bu more→ll; Shank Diameter: 1/2 • Dia Metric: 12.7 • Dia Imperial: 1/2 • Cut Length Metric: 51 • Cut Length Imperial: 2 • Overall Length Metric: 116 • Bearing Dia Metric: 12.7 • Angle: 90

Attractive edge moulds. A full corner bead can be produced by making a second pass at 90 degrees. Specifications • Shank Diameter: 1/4 • Dia Metric: 26 • Dia Imperial: 1 1/32 • more→Dia2 Metric: 22 • Cut Length Metric: 16 • Cut Length Imperial: 5/8 • Overall Length Metric: 70.5 • Bearing Dia Metric: 15.9 • Radius 1 Metric: 4.8

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Sp more→ecifications • Shank Diameter: 1/2 • Dia Metric: 28 • Dia Imperial: 1 7/64 • Cut Length Metric: 25 • Cut Length Imperial: 1 • Overall Length Metric: 64

RA116 Arbor for using Rotabroach mini cutters in standard jawed drill chucks. Includes pilot drill and washers. Specifications • Model; RA116 • Chuck Size: 1/2" • Cutter Diameters 6mm - 20mm

Self guiding cavetto style cutter, which follow the board edges for straight or curved work radius. Specifications • Shank Diameter: 1/4 • Dia Metric: 38.6 • Cut Length Metric: 15.9 &b more→ull; Cut Length Imperial: 5/8 • Overall Length Metric: 68 • Bearing Dia Metric: 12.7 • Bearing Dia Imperial: 1/2 • Radius 1 Metric: 7.9 • Radius 1 Imperial: 5/16

Shank mounted bearing profilers are ideal for template guidance. Use for rebating and trimming edges only. Extra care must be taken to avoid cutter breakage. Specifications • Shank Diameter: more→12 mm • Dia Metric: 19.1 • Dia Imperial: 3/4 • Cut Length Metric: 50 • Cut Length Imperial: 1 31/32 • Overall Length Metric: 94.5 • Bearing Dia Metric: 19.1 • Bearing Dia Imperial: 3/4 • Angle: 90

The CB counterbores are extensively used for recessing bolt and screw heads. Supplied with a HSS slow spiral drill bit. Fully adjustable, a hex key is supplied. TCT version is used for plywood, partic more→le boards and plastics (abrasive). Use a drilling speeds only. Not suitable for ferrous and non-ferrous metals. When setting-up, ensure flutes of drill are aligned with flute of counterbore. For replacement Twist Drills, use slow spiral type e.g 501/532 to 501/012. Specifications • Dia Metric: 12.7 • Dia Imperial: 1/2 • Dia2 Metric: 6.35 • Dia2 Imperial: 1/4 • Overall Length Metric: 100 • Type or Grade: TCT

Trend Craft Pro 1/2in shank bearing guided flush trimming cutter - 19.1mm diameter Two Flute Carbide tips. Two flute carbide TCT tips for clean, professional finish on timber, plastic laminates and v more→eneers. Shank mounted bearing allows good vision of templates for easy and accurate following when hand held routing. 1/2in shank, 50mm cutting depth for bigger routers. Perfect for replicating deeper workpieces including heavier joinery and furniture making work. PTFE coating to minimise heat and resin build up for increased cutter performance and longevity. 1/2in shank for use in bigger routers and heavier applications with 'K'mark shank to ensure safe working practices. Specifications • …

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications • Shank Diam more→eter: 1/2 • Dia Metric: 12 • Dia Imperial: 15/32 • Cut Length Metric: 63 • Overall Length Metric: 114

Ideally suited for cutting radiused edges at speed, as a side fence can be dispensed with. The guide bearing follows the vertical edge or template. Alternative bearing Ref. B127A creates a shallow ra more→dius. Specifications • Shank Diameter: 1/4 • Dia Metric: 34.9 • Cut Length Metric: 19.1 • Cut Length Imperial: 3/4 • Overall Length Metric: 69 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 12.7 • Radius 1 Imperial: 1/2

These specially designed machine bits have a specially designed form of scriber to allow use at high speeds. For recessing circular hinges. For accurate repetitive routing, a template and guide bush f more→itted to the router base should be used. Specifications • Shank Diameter: 1/2 • Dia Metric: 35 • Dia Imperial: 1 3/8 • Overall Length Metric: 60

Ideal for following template. It is advisable that the template is at least 5mm thicker than the cut length of the tool. Specifications • Shank Diameter: 1/4 • Dia Metric: 22 • Cut Len more→gth Metric: 10 • Cut Length Imperial: 25/64 • Overall Length Metric: 61.5 • Bearing Dia Metric: 22 • Radius 1 Metric: 2.4

Self guiding cavetto style cutter, which follow the board edges for straight or curved work radius. Specifications • Shank Diameter: 1/4 • Dia Metric: 34.5 • Cut Length Metric: 15.9 &b more→ull; Cut Length Imperial: 5/8 • Overall Length Metric: 67.5 • Bearing Dia Metric: 12.7 • Radius 1 Metric: 7.9

Suitable for a wide range of applications such as engraving, grooving, rebating and shallow mortising. Use on softwoods, hardwoods, MDF, plywood and chipboard. Cutter has a bottom cut feature. Sp more→ecifications • Shank Diameter: 1/2 • Dia Metric: 28.5 • Dia Imperial: 1 1/8 • Cut Length Metric: 25 • Cut Length Imperial: 1 • Overall Length Metric: 67

By raising the cutter, the top quirk is removed. Specifications • Shank Diameter: 1/4 • Cut Length Metric: 20 • Cut Length Imperial: 25/32 • Overall Length Metric: 69.5 • Bea more→ring Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 6.3

Lasts up to 50x longer than HCS hole saw in tough materials - Cutting holes in brick, soft tiles and drywall is essential for plumbers and electricians on a building site or during renovation work. Fe more→w hole saws can withstand this kind of work in a mixture of tough construction materials, but the EXPERT Construction Material can. This one hole saw serves, and lasts, for many jobs. With just a few huge carbide teeth on its steel body, the EXPERT Construction Material delivers a real bite. Its large slots are optimised for fast chip removal, so it eats through anything from brick to wood and particle boards, fast. Bosch Carbide Technology is an optimum mix of the hardest metals, and ensures an …

Supplied with extra 1/2 inch bearing for removing the lower quirk. Specifications • Shank Diameter: 1/4 • Cut Length Metric: 17.5 • Cut Length Imperial: 11/16 • Overall Length Met more→ric: 69 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 6.3 • Radius 2 Metric: 4.8

Alternative bearing B127A removes the lower quirk. Specifications • Shank Diameter: 1/4 • Cut Length Metric: 12.7 • Cut Length Imperial: 1/2 • Overall Length Metric: 64.5 • B more→earing Dia Metric: 9.5 • Radius 1 Metric: 4 • Radius 2 Metric: 4