1/2" square drive sockets

The two bearings supplied offer the means of cutting different depths of mouldings. Specifications: • Shank Diameter: 1/2 • Dia Metric: 41.3 • Dia Imperial: 1 5/8 • Cut Length Met more→ric: 18 • Overall Length Metric: 65 • Bearing Dia Metric: 9.5 • Bearing Dia Imperial: 3/8 • Radius 1 Metric: 16

The classic method of producing cabinet panelled door and drawer fronts is made easy with these Profile Scriber sets. With the combination type, components are re-arranged on the arbor to cut the prof more→ile or the scribe. Cuts both parts of the joint by only changing the cutter height. No reassembly of the tool is required so saving time. Router table use only. 1/4 inch and 8mm shanks should only be used with a medium or heavy duty router. For certain routers the aperture in the base may need to be enlarged. A workholding device should be used when cutting the scribe cut on the rail ends. The cutting edges should be staggered to each other. When using Easyset cutters take several passes. Specifications: …

The classic method of producing cabinet panelled door and drawer fronts is made easy with these Profile Scriber sets. With the combination type, components are re-arranged on the arbor to cut the prof more→ile or the scribe. Cuts both parts of the joint by only changing the cutter height. No reassembly of the tool is required so saving time. Router table use only. 1/4 inch and 8mm shanks should only be used with a medium or heavy duty router. For certain routers the aperture in the base may need to be enlarged. A workholding device should be used when cutting the scribe cut on the rail ends. The cutting edges should be staggered to each other. When using Easyset cutters take several passes. Specifications: …

One piece tool to increase glueing area for edge to edge joint. Specifications: • Shank Diameter: 1/2 • Dia Metric: 35 • Dia Imperial: 1 3/8 • Cut Length Metric: 38.1 • Overa more→ll Length Metric: 90

This cutter can be used to form the top portion of a handrail moulding when used in conjunction with Ref. C218X1/2TC. For stationary machines - 12000 RPM recommended speed. Specifications: • Sh more→ank Diameter: 1/2 • Dia Metric: 82.7 • Cut Length Metric: 19 • Overall Length Metric: 81.5 • Bearing Dia Metric: 12.7 • Radius 1 Metric: 51

Panel raiser cutters for producing the panel for cabinet panelled doors, tool matches our range of profile scribers. Suitable for use on natural timber and MDF. For use in a router table only. Take more→several passes, increasing the depth with each pass. Must be used in a stationary variable speed router either mounted overhead or inverted in a router table at a reduced speed. For use on natural timber and MDF. Stationary use only. Specifications: • Shank Diameter: 1/2 • Dia Metric: 85.7 • Cut Length Metric: 15.9 • Overall Length Metric: 78.5 • Bearing Dia Metric: 12.7 • Radius 1 Metric: 22.2

The long cut depth of these cutters allows them to produce under-cut finger grooves. Specifications: • Shank Diameter: 1/2 • Dia Metric: 25 • Cut Length Metric: 32 • Overall Lengt more→h Metric: 70 • Radius 1 Metric: 12.5

A large version of a classic moulding for glazing bars, also popular for table and dresser top edge finishes. Specifications: • Shank Diameter: 1/2 • Dia Metric: 36 • Cut Length Metric more→: 33 • Overall Length Metric: 71.1 • Radius 1 Metric: 20

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Dia more→meter: 1/2 • Dia Metric: 50.8 • Dia Imperial: 2 • Cut Length Metric: 25 • Overall Length Metric: 66

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Dia more→meter: 1/2 • Dia Metric: 44.5 • Dia Imperial: 1 3/4 • Cut Length Metric: 32 • Overall Length Metric: 73

TCT for abrasive materials such as chipboard, MDF, plywood, hardwoods and hard plastics. Two flutes give a clean finish to cut edges. Has a TCT plunge centre tip. Specifications: • Shank Dia more→meter: 1/2 • Dia Metric: 50 • Dia Imperial: 1 31/32 • Cut Length Metric: 25 • Overall Length Metric: 63

Ideal for producing nosings and attractive edges. Specifications: • Shank Diameter: 1/2 • Dia Metric: 35.2 • Cut Length Metric: 35 • Overall Length Metric: 83 • Bearing Dia M more→etric: 16 • Radius 1 Metric: 9.5

Bit socket set TORX®, with holding function for especially convenient screwdriving and a reduced risk of losing the screw when approaching the workpiece. Features and Benefits: • Compact textile more→box with high robustness, low weight and volume • Bit socket (non-impact) for manual or power tool operations • The holding function holds screws securely on the tool • Knurling on lower socket end for more grip when used manually • With Take it easy tool finder: colour coding by size Contents: 1x 8767 C TORX® HF 2 Zyklop bit socket set with 1/2" drive, with holding function, 6 pieces; 6x 8767 C HF TORX® Zyklop bit socket with 1/2" drive with holding function: TX 20x140.0, …

The Facom 1/2" Drive Non-Sparking Bi Hexagon Socket Metric is designed for maximum safety and performance in hazardous environments. Ideal for use in industries such as oil and gas, chemical processin more→g, and mining, this socket is crafted from high-quality copper beryllium alloy, ensuring it is non-sparking and safe for use in explosive atmospheres. With its bi-hexagon (12-point) design, this metric socket provides a secure grip on fasteners, reducing the risk of rounding and ensuring efficient torque transfer. The 1/2" drive size is compatible with a wide range of ratchets and torque wrenches, offering versatility and ease of use in various applications. The corrosion-resistant finish enhances …

• NON-SPARKING SAFETY TOOLS – Part of the Sealey Premier Range of Non-Sparking tools suitable for professional daily use.• BERYLLIUM COPPER – Manufactured from non-sparking but physically tough and no more→n-magnetic copper meeting requirements of ATEX Directive for zones 0, 1 and 2.• FOR USE IN ENVIRONMENTS OF RISK – Beryllium copper is resistant to non-oxidising acids making it resistant to abrasive wear and galling.• DIE FORGED – Heat treated for increased strength, durability, and electrical conductivity.• 12PT WALLDRIVE SOCKET – Designed to grip the flats of the fixing allowing for 30% more torque to be applied than traditional hex sockets without causing damage.• 1/2”SQ DRIVE – 22mm Socket with…

One blade. Blades can be rotated in 90 degree increments, giving three new edges. Specifically designed for CNC machines. Specifications: • Shank Diameter: 1/2 • Dia Metric: 17 • C more→ut Length Metric: 8 • Overall Length Metric: 60 • Angle: 45

Self-guiding trimmers with bearings mounted on end of cutter. For trimming plastic or plywood overlay. For copy profiling, use the bearing to follow a template or base edge of board. An approxim more→ate 3mm overlap should be left before copy profiling. When using plastic laminate adhesive to dry before trimming. This avoids clogging the guide bearing. Specifications: • Shank Diameter: 1/2 • Dia Metric: 19.1 • Dia Imperial: 3/4 • Cut Length Metric: 51 • Cut Length Imperial: 2 • Overall Length Metric: 116 • Bearing Dia Metric: 19.1 • Bearing Dia Imperial: 3/4