Nails, Screws, Fasteners

Manufactured with a large flat head, which distributes the load across the fixing to increase the clamping effectiveness. Making it ideal for clamping thin sheet metal, plastic and wood. Features & Benefits • Dome head • Carbon steel • Fully threaded Specifications • Diameter: M6 • Length: 50mm • Quantity: 8

These Set Screws and Hex Nuts are fully threaded and used in a variety of applications. Manufactured from A2 Stainless Steel offering superior corrosion resistance, perfect for external applications. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak. Specifications • Thread Diameter: M10 • Thread Pitch: 1.5mm • Socket Size: 17mm • Point Type: B Point • Nut Type: Hex Full • Nut Socket Size: 17mm • Size: M10 x 40mm • Thread Type: Metric • Head Type: Hex • Pack Quantity: 2

Pan head machine screws with metric thread commonly used in pre-drilled and threaded holes. Features & Benefits • Pan head for extra clamping • Metric thread Specifications • Material: Carbon Steel • Driver Bit Size: PZ2 • Finish: Zinc and Clear Cr3 • Point Type: B Point • Size: M5 x 12mm • Thread Type: Metric • Head Type: Pan • Pack Quantity: 100

These Set Screws and Hex Nuts are fully threaded and used in a variety of applications. Manufactured from A2 Stainless Steel offering superior corrosion resistance, perfect for external applications. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak. Specifications • Thread Diameter: M8 • Thread Pitch: 1.25mm • Socket Size: 13mm • Point Type: B Point • Nut Type: Hex Full • Nut Socket Size: 13mm • Size: M8 x 50mm • Thread Type: Metric • Head Type: Hex • Pack Quantity: 2

These dowels are made from beech and provide secure joints for applications such as furniture building. Available in three sizes. Features & Benefits • Wooden dowels for joinery applications • Made from beech for strength and durability • Ideal for furniture building Specifications • Diameter: 6mm • Length: 30mm • Pack Quantity: 50

Cup square coach bolts (DIN603). Mostly used in wood, these coach bolts are fully threaded up to 150mm and have domed heads. A square under the head grips into the part being fixed, preventing the bolt from turning when the nut is tightened. Manufactured from A2 Stainless Steel offering superior corrosion resistance, perfect for external applications. Specifications • Size(mm): M6 x 25 • Thread Coverage: Fully Threaded • Material: Austenitic Stainless Steel • Thread Type: Metric • Head Type: Dome • Point Type: B Point • Substrates: Hardwood, Softwood, Corrosive Wood • Pack Quantity: 10

Engineered with precision, these screws feature fine threads for a tight, secure fit, ensuring your drywall installations are robust and long-lasting. The black phosphate coating provides exceptional corrosion resistance, making these screws durable and reliable in various environments. The sharp point design allows for quick and easy self-drilling, significantly reducing installation time. The bugle head ensures a smooth, flush finish, making it easy to apply joint compound for a seamless and professional appearance. Their sleek black finish not only enhances durability but also provides a professional look to your work. Features & Benefits • Bugle head to reduce likelihood of damaging …

The unique patented Velocity screw has been specifically designed to give rapid installation into many different materials whilst achieving exceptional pull out resistance. The Velocity screw is designed and manufactured using the most advanced technology giving the user a consistent and reliable product that can be used in a variety of applications.

Box of heavy duty staples for use with Staplers/Tackers, Electric Stapler/Nailer. Sold in boxes of 1000 staples per box. Contents: 1 x Steel Staples, 6 x 11.3mm (Pack of 1000)

A traditional and commonly used washer for clamping and spacing applications.Features & Benefits• Plated in Trivalent Chromium Zinc

Firmahold Staples Type 53 JT21 8mm. Light duty staples suitable for a wide variety of professional and DIY applications. Ideal for pinning fabrics, decoration and light repairs. Specifications • Substrates: Hardwood, Softwood, Plywood, Chipboard, MDF, Plastic, Fabric, Membrane • Material: Carbon Steel • Crown Type: Fine • Point Type: ChiselFeatures & Benefits• Super sharp chisel point • Light duty 0.7mm wire • Galvanised for medium duty rust protection • Flat crown for improved material clamping

These ForgeFix ForgeFast Wood Screws have a universally accepted, Pozi compatible drive. They have 6 underhead lobes for improved countersinking and reduced surface dust, and reinforced countersunk necks which improve holding power. The screws have an anti-friction thread for reduced splitting of the timber, reduced 'jacking' and spinning of joined timber and improved drawing strength. The thread is serrated for improved pull-out and reduced torque when inserting the screw. The double cutting point allows faster drilling time and reduced clogging of wood dust and is capable of piercing 0.8mm steel. The screws have a 'Elementech 400' coating providing an anti-corrosive metal finish, which lasts …

This is a hexagonal nylon nut with a metric thread and is thinner than a Type P. Also known as locking nuts designed to prevent the nut from loosening. Used for all bolting and fastening applications. Manufactured from A2 Stainless Steel offering superior corrosion resistance, perfect for external applications. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics. Specifications • Size(mm): M12 • Thread Pitch: 1.75mm • Material: Austenitic Stainless Steel • Thread Type: Metric • Socket Size: 19mm • Nut Type: Nylon – Type T • H: 12mm • Pack Quantity: 5

These Faithfull fluted dowel pegs are made from air dried beechwood. They are used for making secure joints between pieces of wood or board.The Faithfull FAIDOW1035P fluted wood dowels have the following specifications: Pack quantity: 35. Size: 40 x 10mm.Additional Information:• Type: Dowels• Dowel Diameter: 10mm• Pack Qty.: 35

Ideal for use in many DIY, ironmongery, engineering, electrical and plumbing applications. The Pozidriv has four additional points of contact and does not have the rounded corners that the Phillips screw drive has. Features & Benefits • Pan head for extra clamping • Plated in Trivalent Chromium Zinc • 60° self-tapping thread for ease of insertion Specifications • Diameter: 4.5mm • Length: 12mm • Quantity: 16

ForgeFix ForgeFast Wood Screws have a universally accepted, Torx® compatible drive. Their recessed ribs provide improved countersinking and reduced surface dust, and their reinforced countersunk necks improve holding power. The screws have a patented drill and drive thread for reduced splitting of the timber, reduced 'jacking' and spinning of joined timber, increased pull-out and a firmer fix. A sharp point provides faster bite and is capable of piercing 0.8mm steel. The screws have an 'Elementech 400' coating providing an anti-corrosive metal finish, which lasts up to 6 times longer than standard zinc coatings. The coating is environmentally friendly and does not contain Cr6+. It is …

A fully threaded set screw used in a variety of applications. Manufactured from A2 Stainless Steel offering superior corrosion resistance, perfect for external applications. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics. Specifications • Size(mm): M6 x 25 • Thread Coverage: Fully Threaded • Material: Austenitic Stainless Steel • Thread Type: Metric • Socket Size: 10mm • Head Type: Hex • Point Type: B Point • Substrates: Steel, Thin Sheet Metal • Pack Quantity: 10

Ideal for use in many DIY, ironmongery, engineering, electrical and plumbing applications. The Pozidriv has four additional points of contact and does not have the rounded corners that the Phillips screw drive has. Features & Benefits • Pan head for extra clamping • Plated in Trivalent Chromium Zinc • 60° self-tapping thread for ease of insertion Specifications • Diameter: 4mm • Length: 10mm • Quantity: 25

These Set Screws and Hex Nuts are fully threaded and used in a variety of applications. Manufactured from A2 Stainless Steel offering superior corrosion resistance, perfect for external applications. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak. Specifications • Thread Diameter: M10 • Thread Pitch: 1.5mm • Socket Size: 17mm • Point Type: B Point • Nut Type: Hex Full • Nut Socket Size: 17mm • Size: M10 x 50mm • Thread Type: Metric • Head Type: Hex • Pack Quantity: 2

Stainless Steel self-tapping countersunk pan head screws. Deep pozi sockets and a small head diameter allow for close spacing and a smooth flush finish. Used for stitching metal or attaching to metal. A pre-drilled hole is required. Features & Benefits • Countersunk head • Plated in Trivalent Chromium Zinc • 60° self-tapping thread for ease of insertion Specifications • Diameter: 4.5mm • Length: 30mm • Quantity: 16

These Forgefix Hinged Cover Caps, sometimes known as 'Fold Over Cover Caps', are extremely versatile and will suit most type of screw heads. APPLICATION:Offer a concealed yet aesthetically pleasing finish where screws would normally be bare to the elements or the eye.Used for many sign and sanitary installations as well as cupboard and carcass assembly.uantitHinged Cover Cap White No. 6-8 Bag 100Additional Information:• Type: Hinged• Colour: White• Size: No. 6-8• Pack Qty.: Bag 100

Ideal for use in many DIY, ironmongery, engineering, electrical and plumbing applications. The Pozidriv has four additional points of contact and does not have the rounded corners that the Phillips screw drive has. Features & Benefits • Pan head for extra clamping • Plated in Trivalent Chromium Zinc • 60° self-tapping thread for ease of insertion Specifications • Diameter: 4mm • Length: 6mm • Quantity: 30

Countersunk machine screws with metric thread commonly used in pre-drilled and threaded holes. Features & Benefits • Countersunk head • Metric thread

Arrow A215 JT21 Light Duty Staples 5/16" (Pack Of 1000) The Arrow A215 JT21 staples are suitable for use with the JT21 tacker for fixing fabrics, thin plastics, cardboard and more. They have been built with the same quality and precision as the T50, utilising a thinner wire in a smaller staple format to deliver great holding power. Features:
- Built with the same quality and precision as the T50, these staples utilize a thinner wire in a smaller staple format to deliver great holding power
- They are exceptionally easy to fire
- Perfect for use on light fabrics, thin plastics, cardboard and other craft projects
- Steel staples have low corrosion resistance, therefore, are ideal for in…