Nails, Screws, Fasteners

Ideal for use in many DIY, ironmongery, engineering, electrical and plumbing applications. The Pozidriv has four additional points of contact and does not have the rounded corners that the Phillips screw drive has. Features & Benefits • Pan head for extra clamping • Plated in Trivalent Chromium Zinc • 60° self-tapping thread for ease of insertion Specifications • Diameter: 4mm • Length: 12mm • Quantity: 20

ForgeFix ForgeFast Wood Screws have a universally accepted, Torx® compatible drive. Their recessed ribs provide improved countersinking and reduced surface dust, and their reinforced countersunk necks improve holding power. The screws have a patented drill and drive thread for reduced splitting of the timber, reduced 'jacking' and spinning of joined timber, increased pull-out and a firmer fix. A sharp point provides faster bite and is capable of piercing 0.8mm steel. The screws have an 'Elementech 400' coating providing an anti-corrosive metal finish, which lasts up to 6 times longer than standard zinc coatings. The coating is environmentally friendly and does not contain Cr6+. It is …

A fully threaded set screw used in a variety of applications. Manufactured from A2 Stainless Steel offering superior corrosion resistance, perfect for external applications. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics. Specifications • Size(mm): M6 x 30 • Thread Coverage: Fully Threaded • Material: Austenitic Stainless Steel • Thread Type: Metric • Socket Size: 10mm • Head Type: Hex • Point Type: B Point • Substrates: Steel, Thin Sheet Metal • Pack Quantity: 10

Countersunk machine screws with metric thread commonly used in pre-drilled and threaded holes. Features & Benefits • Countersunk head • Metric thread

Manufactured with a large flat head, which distributes the load across the fixing to increase the clamping effectiveness. Making it ideal for clamping thin sheet metal, plastic and wood. Features & Benefits • Dome head • Carbon steel • Fully threaded Specifications • Diameter: M6 • Length: 50mm • Quantity: 8

These Set Screws and Hex Nuts are fully threaded and used in a variety of applications. Manufactured from A2 Stainless Steel offering superior corrosion resistance, perfect for external applications. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak. Specifications • Thread Diameter: M10 • Thread Pitch: 1.5mm • Socket Size: 17mm • Point Type: B Point • Nut Type: Hex Full • Nut Socket Size: 17mm • Size: M10 x 40mm • Thread Type: Metric • Head Type: Hex • Pack Quantity: 2

Pan head machine screws with metric thread commonly used in pre-drilled and threaded holes. Features & Benefits • Pan head for extra clamping • Metric thread Specifications • Material: Carbon Steel • Driver Bit Size: PZ2 • Finish: Zinc and Clear Cr3 • Point Type: B Point • Size: M5 x 12mm • Thread Type: Metric • Head Type: Pan • Pack Quantity: 100

Stainless Steel self-tapping countersunk pan head screws. Deep pozi sockets and a small head diameter allow for close spacing and a smooth flush finish. Used for stitching metal or attaching to metal. A pre-drilled hole is required. Features & Benefits • Countersunk head • Plated in Trivalent Chromium Zinc • 60° self-tapping thread for ease of insertion Specifications • Diameter: 4.5mm • Length: 30mm • Quantity: 16

These Forgefix Hinged Cover Caps, sometimes known as 'Fold Over Cover Caps', are extremely versatile and will suit most type of screw heads. APPLICATION:Offer a concealed yet aesthetically pleasing finish where screws would normally be bare to the elements or the eye.Used for many sign and sanitary installations as well as cupboard and carcass assembly.uantitHinged Cover Cap White No. 6-8 Bag 100Additional Information:• Type: Hinged• Colour: White• Size: No. 6-8• Pack Qty.: Bag 100

These Set Screws and Hex Nuts are fully threaded and used in a variety of applications. Manufactured from A2 Stainless Steel offering superior corrosion resistance, perfect for external applications. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak. Specifications • Thread Diameter: M8 • Thread Pitch: 1.25mm • Socket Size: 13mm • Point Type: B Point • Nut Type: Hex Full • Nut Socket Size: 13mm • Size: M8 x 50mm • Thread Type: Metric • Head Type: Hex • Pack Quantity: 2

Cup square coach bolts (DIN603). Mostly used in wood, these coach bolts are fully threaded up to 150mm and have domed heads. A square under the head grips into the part being fixed, preventing the bolt from turning when the nut is tightened. Manufactured from A2 Stainless Steel offering superior corrosion resistance, perfect for external applications. Specifications • Size(mm): M6 x 25 • Thread Coverage: Fully Threaded • Material: Austenitic Stainless Steel • Thread Type: Metric • Head Type: Dome • Point Type: B Point • Substrates: Hardwood, Softwood, Corrosive Wood • Pack Quantity: 10

Stanley 0-TRA204T Light Duty Staples 6mm (Pack of 1000) The Stanley 0-TRA206T Light Duty Staples fit the following makes and models:
- Stanley TR45, 69-721, 69-701, 69-702 69-702, 69-720, 69-721, ST10, ST14
- Rapesco 853-T, 853-D
- Rapid R153, R253, R353, MS4.1, R453, MS610, ESN530
- Novus J02, J06, J08, J09, J14, J16, J17, J18, J19, J100
- Arrow JT21, T27 Features:
- Suitable for light-duty staplers and hammer tackers
- Colour-coded packaging makes size and product selection easy
- Sturdy plastic storage pack Specification:
- Part number: 0-TRA204T
- Quantity: 1000
- Size: 6mm

This is a hexagonal nylon nut with a metric thread and is thinner than a Type P. Also known as locking nuts designed to prevent the nut from loosening. Used for all bolting and fastening applications. Manufactured from A2 Stainless Steel offering superior corrosion resistance, perfect for external applications. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics. Specifications • Size(mm): M12 • Thread Pitch: 1.75mm • Material: Austenitic Stainless Steel • Thread Type: Metric • Socket Size: 19mm • Nut Type: Nylon – Type T • H: 12mm • Pack Quantity: 5

Ideal for use in many DIY, ironmongery, engineering, electrical and plumbing applications. The Pozidriv has four additional points of contact and does not have the rounded corners that the Phillips screw drive has. Features & Benefits • Pan head for extra clamping • Plated in Trivalent Chromium Zinc • 60° self-tapping thread for ease of insertion Specifications • Diameter: 4.5mm • Length: 12mm • Quantity: 16

Jubilee® clips are Kite marked to BS5315 (1991) and the company is licensed to BS EN ISO 9001. Lloyds Register Approved 304 Stainless Steel, used for fixing flexible rubber hoses, metal tubes etc. Stainless Steel gives increased resistance to corrosion.Size 1AAdjustment 22 - 30mmAdjustment 7/8 - 1.1/8inAdditional Information:• Type: Hose Clip• Material: Stainless Steel• Clip Size: 1A• Adjustment (Metric): 22-30mm• Adjustment (Imperial): 7/8 - 1.1/8in

These Forgefix Hinged Cover Caps, sometimes known as 'Fold Over Cover Caps', are extremely versatile and will suit most type of screw heads. APPLICATION:Offer a concealed yet aesthetically pleasing finish where screws would normally be bare to the elements or the eye.Used for many sign and sanitary installations as well as cupboard and carcass assembly.Hinged Cover Cap Black No. 6-8 Bag 100Additional Information:• Type: Hinged• Colour: Black• Size: No. 6-8• Pack Qty.: Bag 100

Jubilee® clips are Kite marked to BS5315 (1991) and the company is licensed to BS EN ISO 9001. Lloyds Register Approved 304 Stainless Steel, used for fixing flexible rubber hoses, metal tubes etc. Stainless Steel gives increased resistance to corrosion.Size 1Adjustment 25 - 35mmAdjustment 1 - 1.3/8inAdditional Information:• Type: Hose Clip• Material: Stainless Steel• Clip Size: 1• Adjustment (Metric): 25-35mm• Adjustment (Imperial): 1 - 1.3/8in

These dowels are made from beech and provide secure joints for applications such as furniture building. Available in three sizes. Features & Benefits • Wooden dowels for joinery applications • Made from beech for strength and durability • Ideal for furniture building Specifications • Diameter: 8mm • Length: 40mm • Pack Quantity: 40

A fully threaded set screw used in a variety of applications. Manufactured from A2 Stainless Steel offering superior corrosion resistance, perfect for external applications. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics. Specifications • Size(mm): M6 x 25 • Thread Coverage: Fully Threaded • Material: Austenitic Stainless Steel • Thread Type: Metric • Socket Size: 10mm • Head Type: Hex • Point Type: B Point • Substrates: Steel, Thin Sheet Metal • Pack Quantity: 10

The Solo Countersinking Pozi Wood Screws are a single thread woodscrew mainly used in various types of timber and man-made boards or into masonry with the use of a plastic plug. Features & Benefits • Double countersunk reduces the likelihood of head shear and assists completion of countersinking • Wax lubricated to enhance screw insertion time, extra driving torque and resistance to corrosion • 40° deep single thread to provide a secure fixing with high pull-out resistance • 25° sharp point and single lead for a fast start and improved thread acceptance Specifications • Pack Dimensions L x W x H: 85 x 55 x 45mm • Material: Carbon Steel • Lubrication: …

Ideal for use in many DIY, ironmongery, engineering, electrical and plumbing applications. The Pozidriv has four additional points of contact and does not have the rounded corners that the Phillips screw drive has. Features & Benefits • Pan head for extra clamping • Plated in Trivalent Chromium Zinc • 60° self-tapping thread for ease of insertion Specifications • Diameter: 4mm • Length: 10mm • Quantity: 25

Jubilee® clips are Kite marked to BS5315 (1991) and the company is licensed to ISO 9001. Made from mild steel, zinc protected and used for fixing flexible rubber hoses, metal tubes etc.Size 7Adjustment . 135 - 165mmAdjustment. 5.1/4 - 6.1/2inAdditional Information:• Type: Hose Clip• Material: Zinc Protected• Clip Size: 7in• Adjustment (Metric): 135-165mm• Adjustment (Imperial): 5.1/4 - 6.1/2in

These Set Screws and Hex Nuts are fully threaded and used in a variety of applications. Manufactured from A2 Stainless Steel offering superior corrosion resistance, perfect for external applications. Stainless steel must be used where there is corrosive environment and/or the base material has inherent corrosive characteristics e.g. Green Oak. Specifications • Thread Diameter: M10 • Thread Pitch: 1.5mm • Socket Size: 17mm • Point Type: B Point • Nut Type: Hex Full • Nut Socket Size: 17mm • Size: M10 x 50mm • Thread Type: Metric • Head Type: Hex • Pack Quantity: 2

Ideal for use in many DIY, ironmongery, engineering, electrical and plumbing applications. The Pozidriv has four additional points of contact and does not have the rounded corners that the Phillips screw drive has. Features & Benefits • Pan head for extra clamping • Plated in Trivalent Chromium Zinc • 60° self-tapping thread for ease of insertion Specifications • Diameter: 4mm • Length: 6mm • Quantity: 30