Car Amplifiers

JX Series Monoblock Amplifier 500 rms @ 4ohms 750 rms @ 3ohms and 1000 rms @ 2ohms Unregulated PWM switching type power supply Variable Bass Boost (0 to +12 dB bass boost centered at 45 Hz) Soft start turn-on prevent clicking and popping when system turns on Dimensions: 11"L x 7-3/4"W x 2"H

100W x 4 (330W x 2 bridged) RMS output power at 4 ohms 165W x 4 RMS output power at 2 ohms High-Resolution Audio compatible Signal summing for seamless connection to factory audio and combined pre-outs Updated connection terminals and control panel

Low Distortion Full On-Board Protection Proprietary High-Conductivity Terminals Remote Bass Control

Packaged included: 1 x Audio Power Amplifier 1 x Remote control Specifications: Model: AV 501BT Size: 25x19x8cm/9.8"x7.2"x3.1" Rated voltage: 110V/220V change,Dc12v/220v Rated power: 2000W Frequency Response: 20KH 20KHz(±10dB) Input sensitivity: 150mv (± 30mv) Tone Control: TREBLE: 10db at 10KHz MID: 8db at 1KHz BASS: 10db at 100KHz Surround Effect Control: 0 10dB Signal to noise ratio: more than 80dB Loudness: +6dB at 100Hz. +6dB at 10KHz Load Impeckance: 4 to 8 ohm AUX Input: Support Color: Black Features: 1. Power supply: AC 220V/110V conversion input, DC 12V input. 2. Built in bluetooth receiving function, USB playback and SD card

Hertz H8 DSP 8 Channel DSP Digital Sound Processor

Feature: 1)This machine has two microphone input channels. The overall design is based on room requirements. The Kara OK effect processor uses 24 bit. The 96 khz high-speed ADC DAC chip handles human voice effects, making the singing more natural and beautiful 2)MP3 player with USB stick and SD card, FM radio with automatic channel search function. 3)Built-in MP3 player with infrared remote control receiving function. 4)Built-in Bluetooth Receiving Function. 5)This machine has perfect protection measures - Output short circuit protection system. - Overheat overload protection. Specification: 1.Rated voltage: DC12V/AC 220V 2.Rated power: 50W+50W 3.Max power: 400W+400W 4.Resolution: 20-20 KHZ

Max Power 1600W Variable High & Low Pass Filter with Bass Boost Rich and Immersive High-Resolution Audio RMS POWER OUTPUT (4Ω): 50W x 4 + 300W / RMS POWER OUTPUT (2Ω): 75W x 4 + 500W RMS POWER OUTPUT Bridged: 150W x 2 (Bridged) + 300W

Class D 5 Channel Amplifier 2000 Watts MAX Power Variable HPF/LPF Gold RCA Terminal Hi-Res Capable Bass Boost Remote Included

Parameter Information: Signal To Noise Ratio: 105dB Out Power: 1000W Subwoofers Types: Enclosed Subwoofer Systems RMS: 600W Item Size: 235x155mm Material Type: Metal Voltage: 12V Frequency Range (Hz): 30Hz~280KHz Impedance: 4-8Ω Audio Sensitivity: 105dB Color: Black Features: - Using high power non-sense resistance, good stability, support high temperature working. - The design of aluminum alloy cooling holes for vehicle power amplifiers has wider contact with air and faster heat dissipation. - Vehicle power amplifier housing adopts standard safety interface to eliminate inferior accessories. - Two color coil transformer, small size and high power, reject all short circuit and improve the

Class D Technology 4-Channel Amplifier 600-Watts Maximum Power Bass Boost Capabilities Signal Sensing Turn-On 8-gauge Power and Ground Leads Recommended

Compact Design - Class D amplifiers are generally more compact in size compared to other amplifier classes. The compact design of the GM-DX871 makes it easier to install in various vehicles with limited space and without taking up excessive space. Protection Control System - Monitors the input voltage, current consumption, and operating temperature to automatically adjust the amplifier’s output to ensure stability during listening sessions or when installed in high-temperature environments..Instruction & Operation – Please see the Owner’s Manual for full detail and operation found near the bottom of this page (Technical Specifications). Dimensions 8.5” x 9.88” x 2.38” International products hav…

Max Power: 1000W RMS POWER OUTPUT (4Ω): 300W RMS POWER OUTPUT (2Ω): 500W Speaker Level Input / Signal Sensing Turn-On Variable Low Pass Filter / Bass Boost

4 - Channel Power Amplifier 75 Watts RMS X 4 At 2 Ohms (50 Watts RMS X 4 At 4 Ohms) Speaker Level Input Variable High / Low Pass Filters

Channel: 2 Output Power: RMS 20W+ 20W 1KH Frequency Range: 87.5 ~ 108MHz Impedance: null SNR: 85dB Sensitivity: 0.25mv-50mv Material: Lightweight aluminum Function:12V Car Power Amplifier Support USB / SD Card Input Features: - It can play U disk SD / MMC card for music and FM car motorcycle stereo radio, support MP3 music format. - Two main channel output. - Pre-professiona level input operational amplifier IC for circuit design, sound, transparent, bright. - Filtering and anti-large-capacity power circuit. - DSP sound field pattern of the four. - It supports FM radio play (FM: 87.5 ~ 108MHz). Controls and Buttons: - 4-Electronic keypad control - Volume on / off - USB / FM Mode