Cooling Systems Accessories

EK-Quantum Torque Micro HDP 12 fittings are EK's new push-in hard-tube fittings designed for use with 12mm solid tubing such as Acrylic and PETG. They are stealthy and made to be as small as possible, and with NO added branding at all. They are engineered specifically for captive tubing - like runs between two GPU water blocks, or from a GPU to the distro plate. Most importantly, the tube should not be able to move when using these fittings. The solid tube is gripped by the high-quality EPDM rubber gasket inside the Torque Micro HDP fitting. The fitting is made of nickel-plated CNC-machined brass. These fittings are guaranteed to be compatible with all other EK Water Blocks liquid cooling …

Features:- Bitspower OD14mm hard tube- Cut in 1000mm length- RoHS Compliant.- Dimension ( FxH ) : 14 x 1000 MM. ( +/-3%)

Mayhems 1.1 Meter Silicone Bending Cord 9.5mm OD for 10mm Petg and Acrylic Hard tubing Extreme temperatures -40°C to +200°C. Good electrical resistance and insulation properties.FDA approved Silicone rubber cord is the preferred Perfect for bending PETG and Acrillic Hard Tubing.Tolerance of +/- 1mmSpecification:- Colour: White- Material: Silicone (VMQ)- Cross Section Type: Circular- Hardness (Shore A): 60- Maximum Temperature (°C): 200- Minimum Temperature (°C): -40- Elongation at break (%): 590- Tensile Strength (MPa): 10.5- Compression Set (%): 20

With this acrylic hard tube from Barrow , your water cooling will be a complete success. The tube is completely transparent, showing off the coolant inside.The 500 mm long tube has an outer diameter of 16 mm and an inner diameter of 12 mm and can be easily cut and bent with the right tool.Technical details:- Material: Acryl (PMMA)- Colour: White- Outer Diameter: 16mm- Inner Diameter: 12mm- Length: 500 mm- Compatibility: Connections with 16 mm outside diameter

This water cooling fitting from Barrow has been designed for hard tubes with an outer diameter of 14 mm. This fitting has a standardized G1/4 inch connection to connect your Water cooling components. The thread is sealed with a rubber ring.The connection is made of brass and alloyed with aluminum. The surface is covered with an intricately textured pattern, which increases grip when tightening. With this fitting your hard tubes are always secure!Technical details:- Material: brass, aluminum (alloy)- Color: BlackConnections:- External thread: G1/4 inch- Hard tube: 14 mm outer diameter (OD)

This water cooling fitting from Barrow has been designed for hard tubes with an outer diameter of 12 mm. This fitting has a standardized G1/4 inch connection to connect your Water cooling components. The thread is sealed with a rubber ring.The connection is made of brass and alloyed with aluminum. The surface is covered with an intricately textured pattern, which increases grip when tightening. With this fitting your hard tubes are always secure!Technical details:- Material: brass, aluminum (alloy)- Color: BlackConnections:- External thread: G1/4 inch- Hard tube: 12 mm outer diameter (OD)

The EK-HD PETG Inserts are EK's way of battling against potential hazards that the use of PETG tubes present. PETG tubes are extremely popular because of the ease of use and their flexibility. On the other hand, PETG tubing, especially the thin tube wall models (10/12) are prone to deformation when exposed to high temperatures (40°C and above). The deformation rate depends on the duration and maximum temperature reached. These temperatures can be reached with pump failures, water block clogging, etc. The EK-HD PETG Inserts provide a safety measure for 12mm OD / 10mm ID PETG tubes which prevents the tube wall from collapsing inside the compression fitting. The EK-HD PETG Insert is low …

Mayhems 1.1 Meter Silicone Bending Cord 12.7mm OD for 13mm Petg and Acrylic Hard tubing Extreme temperatures -40°C to +200°C. Good electrical resistance and insulation properties.FDA approved Silicone rubber cord is the preferred Perfect for bending PET-G and Acrillic Hard Tubing.Tolerance of +/- 1mmSpecification:- Colour: White- Material: Silicone (VMQ)- Cross Section Type: Circular- Hardness (Shore A): 60- Maximum Temperature (°C): 200- Minimum Temperature (°C): -40- Elongation at break (%): 590- Tensile Strength (MPa): 10.5- Compression Set (%): 20

To connect the individual components of the water cooling system, it is essential to choose the right connections and their sufficient number. Otherwise the installation quickly becomes a frustrating experience if the assembly fails due to the wrong or too few connectors and is delayed as a result.Bitspower offers a comprehensive range, which has the right solution for every requirement - whether adapter, direct hose connections, elbow or distributor.This is an adapter for connecting acrylic tubes in a water cooling circuit. The in-house Crystal Link Tubes are particularly suitable for this and can be used, for example, to connect two graphics cards and bridge the distance between the two accordingly.…

XSPC Rigid Tubing Fittings are designed for 14mm PETG tubing and 14mm metal tubing. The fittings have two push seals and an additional compression seal for a safe and secure connection.- Triple O-Ring Seal- Material: Brass- Finish: Matte Black Electroplated- For 14mm OD Rigid Tubing- G1/4" Thread- Easy tool free installation

EK-Quantum Torque Micro HDP 12 fittings are EK's new push-in hard-tube fittings designed for use with 12mm solid tubing such as Acrylic and PETG. They are stealthy and made to be as small as possible, and with NO added branding at all. They are engineered specifically for captive tubing - like runs between two GPU water blocks, or from a GPU to the distro plate. Most importantly, the tube should not be able to move when using these fittings. The solid tube is gripped by the high-quality EPDM rubber gasket inside the Torque Micro HDP fitting. The fitting is made of CNC-machined brass with high-quality satin silver finish. Satin Titanium Quantum Torque series fittings are intentionally not painted …

All requirements that are placed on a connection are fulfilled here: Highflow, form, processing and colouring. Uncompromising development and production have made the Eiszapfen what they are. In brilliant chrome and matte deep black, there are two versions that fit perfectly into any system. With special processes, the coatings are firmly bonded to ensure the longevity of the intense colours. Each port now has the Alphacool logo which makes it unmistakable in addition to its special shape! Due to the beveled edges of the union nut, the O-ring is very firmly pressed against the hard tube, making it even stronger than in its predecessors. This ensures more safety during transport. Design: straight …

XSPC Rigid Tubing Fittings are designed for 14mm PETG tubing and 14mm metal tubing. The fittings have two push seals and an additional compression seal for a safe and secure connection.- Triple O-Ring Seal- Material: Brass- Finish: Chrome- For 14mm OD Rigid Tubing- G1/4" Thread- Easy tool free installation Only for use with XSPC 14mm PETG and Rigid Tubing Fittings

Selecting the correct choice and number of connectors for individual water cooling components is essential, if this stage goes awry the experience can quickly become one beset with delays and frustration. Phanteks offers a comprehensive range of connectors that provide the perfect solution whatever the requirement - whether it be adapters, tubing or angled-fittings. The design is solid and comes with sealing rings. This allows connectors to remain water resistant and provide long term durability. This is a premium edition black stop-fitting with knurled edges for improved grip and a G1/4" thread. This allows unneeded temporary or long term openings to be blocked off, such as unused ports on …

The Bitspower None Chamfer PETG Link Tube is a solid tube and is used to connect multiple VGA water cooling blocks or other watercooling components.The 1000 mm long tube having an inner diameter of 10 mm, while the outer diameter is 12 mm. It consists of PETG (polyethylene terephthalate), a plastic material, as it is also used for the known PET bottles. It has a particularly high stability, high resistance to breakage, which greatly facilitates the processing of custom water cooling.Features: - Only Compaible With Bitspower Fitting EML Series.- Pure PETG Material.- Durable And Strength Performance.- RoHS Compliant.

Connecting individual water-cooling components requires extra attention to detail in regards to choosing the correct fittings as well as the correct number. Assembling a cooling loop with the incorrect fittings to hand or not enough of them can quickly turn into a frustrating experience - as well as holding up your build. This is a chrome-plated adapter used for extending connections within water-cooling loops. This is a chrome-plated adapter used to extend connections within a water-cooling loop. The adapter is a coupling for connecting two hard tubes with 16 mm outer diameters at a 45 degree angle. The sleeve nuts are made from aluminium and two rubber rings ensure a watertight seal.Specification:Material: …

XSPC PETG tubing is highly transparent and the 2mm wall thickness makes the tubing easier to bend without kinking. Each pack contains two 50cm lengths. Specification: - High Transparancy - Outer Diameter: 14mm - Inner Diameter: 10mm - Wall Thickness: 2mm - Length: 2x 50cm - Material: PETG Only for use with XSPC PETG fittings

The Alphacool Eiszapfen HardTube fittings are among the most popular HardTube water cooling fittings on the market. They are characterized by their high processing quality and the triple sealing system.High quality coatingAlphacool uses advanced chromating to apply the paint to the brass connection. This not only makes the paint more even; it is also much more durable and resistant to external influences. The small Alphacool logo is lasered in and not printed. Therefore, it cannot be removed by friction.Triple sealTightness is essential for a water loop. Alphacool uses three sealing O-rings for these Eiszapfen fittings which seal against the Tube. Two O-rings are integrated in the fitting, while …

With this acrylic hard tube from Barrow , your water cooling will be a complete success. The tube is completely transparent, showing off the coolant inside.The 500 mm long tube has an outer diameter of 16 mm and an inner diameter of 12 mm and can be easily cut and bent with the right tool.Technical details:- Material: Acryl (PMMA)- Colour: Clear- Outer Diameter: 16mm- Inner Diameter: 12mm- Length: 500 mm- Compatibility: Connections with 16 mm outside diameter

XSPC Rigid Tubing Fittings are designed for 14mm PETG tubing and 14mm metal tubing. The fittings have two push seals and an additional compression seal for a safe and secure connection.- Triple O-Ring Seal- Material: Brass- Finish: Black Chrome- For 14mm OD Rigid Tubing- G1/4" Thread- Easy tool free installation Only for use with XSPC 14mm PETG and Rigid Tubing Fittings

Spare Reservoir Holder made from POM Acetal for cylindrical reservoirs 60mm in diameter.Grip can be adjusted by side-positioned screw.May be used on EK-Multioption RES X2 and EK-RES X3 reservoirs as well as 3rd party product.Contents:- Holder (2x)- Mounting mechanism

EK-Loop Bending Cord for 10mm ID Hard Tube - 0.33m is a silicone cord for bending acrylic and PETG tubing. It features high heat and abrasion resistance, helping the tube not to deform while subjected to the high temperatures of a heat gun during the bending process. Using a heat gun and the enclosed silicone bending cord (insert), it is possible to make customized pieces of solid tubing. Use the hacksaw to cut pieces to length and sandpaper to chamfer and smooth out the edges. For a perfect chamfer, EK recommends the use of the EK-HD Tube Reamer tool. EK-Loop Bending Cord is 0.33m long. It is made of flexible silicone with high elasticity, allowing it to be inserted and pulled out of a bent …

This Tubing will aid you when trying to get that smooth bend in your acrylic tubing. Insert this tube when heating up the acrlic to ensure you get the bend you want and without kinks. Features: - Easy To Use. - Only Compatible With Bitspower Hard Tube Series. - Is Extremely Heat Resistant. - RoHS Compliant.

EK-HD PETG Tube is solid type PETG tubing intended for use with EK-HD push-in adapters and EK-HDC series compression fittings. The tubing may be heat treated to achieve certain bends. For expert users only! It is mandatory to chamfer the edges of freshly cut tube in order to prevent gasket (O-ring) damage. EK recommends a 0,5mm x 45° chamfer. Specification: - Material: PETG - Inner diameter: 10 mm - Outer diameter: 12 mm - Length: 500 mm (19.5") - Clear The package contains 2 pieces of tube only. Please purchase EK-HD Adapter or EK-HDC compression fittings separately! For easier installation we recommend wetting the gasket (O-ring) using drops of water prior to installing solid tube.