Cooling Systems Accessories

16 piece bag of 6-32 30mm screws for attaching fans to XSPC radiators.

The ATX bridge tool allows you to start the PSU without the motherboard being connected to the PSU. The tool will fit both 20 and 24pin ATX power supplies.

Essential tool for Water cooling enthusiastsThis 24-pin jumper from Barrow is a must-have for all water cooling fans who care about the safety of their system. Once your custom loop has been assembled, your system still needs to be filled. For this, the pump requires power from the power supply unit. For safety reasons, the rest of your system should remain free of power.In order not to have to start the whole computer, you simply disconnect your mainboard from the power supply. The bridging plug from Barrow now comes on the connection of the power supply. If you now connect the pump to the power pack and press the power switch, your power pack will supply the pump with power. This is how you …

EK-Cable Pump testing adapter is a simple adapter cable for connecting any liquid cooling pump (with 4-pin fan header) or computer cooling fan with SATA power cable. This adapter is recommended to be used only for testing purposes while leak-testing your loop and is intended to be connected directly to PSU, without the need for powering up the entire system. The cable is approximately 15cm long.Features: - 3-pin fan header to SATA power adapter- RoHS compliant

A set of twenty (20) spare 6mm long screws for EK-Quantum Surface S, P, and X series radiators.Recommended for mounting the EK-Quantum Surface radiators directly to the case or through an open frame fan.Specifications:- Thread: M4- Screw length: 6mm- Head type: Phillips

DetailsEK-ATX Bridging Plug (24 pin)- Ideal for use with 12v Water Pumps to power up without mainboard power.- Fits 24 Pin ATX PSU's

With this acrylic hard tube from Barrow , your water cooling will be a complete success. The pipe is all white so it blends in perfectly with white builds. It gives your water cooling circuit a unique look.The 500 mm long tube has an outer diameter of 12 mm and an inner diameter of 8 mm and can be easily cut and bent with the right tool.Technical details:- Material: Acryl (PMMA)- Colour: White- Outer Diameter: 12mm- Inner Diameter: 8mm- Length: 500 mm- Compatibility: Connections with 12 mm outside diameter

Features:- Bitspower OD16mm hard tube- Cut in 500mm length- RoHS Compliant.- Dimension ( FxH ) : 16 x 500 MM. ( +/-3%)

Aqua computer is one of the specialists among the manufacturers of high-quality water cooling systems and offers a wide range of own development and at the same time modifies the products of other manufacturers in order to perfectly match them with the requirements in the water cooling segment. High quality with German production, elegant design and high degree of innovation are the main requirements. For example , aqua computer offers a black connection cable for connecting the Splitty4's RGB LED hub to a corresponding 4-pin RGBpx-compatible device. The cable is 10 cm long. Technical details:- Length: 10 cm- Colour: Black- Connection: 4 Pin RGBpx- Compatibility: aqua computer Splitty4

With this acrylic hard tube from Barrow , your water cooling will be a complete success. The tube is completely transparent, showing off the coolant inside.The 500 mm long tube has an outer diameter of 12 mm and an inner diameter of 8 mm and can be easily cut and bent with the right tool.Technical details:- Material: Acryl (PMMA)- Colour: Clear- Outer Diameter: 12mm- Inner Diameter: 8mm- Length: 500 mm- Compatibility: Connections with 12 mm outside diameter

Features:- Bitspower OD14mm hard tube- Cut in 500mm length- RoHS Compliant.- Dimension ( FxH ) : 14 x 500 MM. ( +/-3%)

Replacement inner O-ring gaskets for EK Hard Tube Compression (HDC) 16mm OD fittings.The package contains 6 pieces of OR 16,1x1,6 NBR70.These O-ring gaskets are compatible with the following fitting lines:EK-Quantum Torque HDC 16EK-Classic HDC 16

Replacement inner O-ring gaskets for EK Hard Tube Compression (HDC) 14mm OD fittings.The package contains 6 pieces of OR 14,1x1,6 NBR70.These O-ring gaskets are compatible with the following fitting lines:EK-Quantum Torque HDC 14EK-Classic HDC 14

EK-Quantum Torque Micro HDP 12 fittings are EK's new push-in hard-tube fittings designed for use with 12mm solid tubing such as Acrylic and PETG. They are stealthy and made to be as small as possible, and with NO added branding at all. They are engineered specifically for captive tubing - like runs between two GPU water blocks, or from a GPU to the distro plate. Most importantly, the tube should not be able to move when using these fittings. The solid tube is gripped by the high-quality EPDM rubber gasket inside the Torque Micro HDP fitting. The fitting is made of nickel-plated CNC-machined brass. These fittings are guaranteed to be compatible with all other EK Water Blocks liquid cooling …

EK-Loop D5 Pump Mounting Kit is a mounting kit for D5 pumps that enables users to convert their DDC-powered FLT series combo unit or EK-Mana G2 PC-O11D EVO distribution plate to a D5 variant. It contains a bracket that holds the pump, an o-ring for the pump, and four screws to fasten the bracket to the reservoir. This kit does NOT contain a D5 pump. EK suggests the EK-Loop D5 G3 PWM Motor, which is the most modern version of the D5 pump with a SATA power connector. Compatibility: - 3831109905630 EK-Mana G2 PC-O11D EVO DDC D-RGB Distribution Plate - 3831109851159 EK-Quantum Kinetic FLT 80 DDC PWM D-RGB - Plexi - 3831109819753 EK-Quantum Kinetic FLT 120 DDC PWM D-RGB - Plexi - 3831109819760 …

Connecting individual water-cooling components requires extra attention to detail in regards to choosing the correct fittings as well as the correct number. Assembling a cooling loop with the incorrect fittings to hand or not enough of them can quickly turn into a frustrating experience - as well as holding up your build. This is an adapter in black used for extending connections within water-cooling loops. The adapter is a coupling that connects two hard tubes with outer diameters of 16 mm at a 45 degree angle. The sleeve nuts are made of aluminium and utilise two rubber rings to ensure a watertight seal.Specification:Material: Aluminium, BrassColour: BlackAngle: 45 DegreesFittings: 2x Ø …

The Bitspower None Chamfer PETG Link Tube is a solid tube and is used to connect multiple VGA water cooling blocks or other watercooling components. The 500 mm long tube having an inner diameter of 11 mm, while the outer diameter is 14 mm. It consists of PETG (polyethylene terephthalate), a plastic material, as it is also used for the known PET bottles. It has a particularly high stability, high resistance to breakage, which greatly facilitates the processing of custom water cooling. Features: - Only Compaible With Bitspower Fitting EML Series. - Pure PETG Material. - Durable And Strength Performance. - RoHS Compliant.

With this acrylic hard tube from Barrow , your water cooling will be a complete success. The tube is completely transparent, showing off the coolant inside.The 500 mm long tube has an outer diameter of 14 mm and an inner diameter of 10 mm and can be easily cut and bent with the right tool.Technical details:- Material: Acryl (PMMA)- Colour: Clear- Outer Diameter: 14mm- Inner Diameter: 10mm- Length: 500 mm- Compatibility: Connections with 14 mm outside diameter

EK-Quantum Torque Micro HDP 12 fittings are EK's new push-in hard-tube fittings designed for use with 12mm solid tubing such as Acrylic and PETG. They are stealthy and made to be as small as possible, and with NO added branding at all. They are engineered specifically for captive tubing - like runs between two GPU water blocks, or from a GPU to the distro plate. Most importantly, the tube should not be able to move when using these fittings. The solid tube is gripped by the high-quality EPDM rubber gasket inside the Torque Micro HDP fitting. The fitting is made of CNC-machined brass with satin-black finish. Black Quantum Torque series fittings are intentionally not painted on the inside to …

This water cooling fitting from Barrow has been designed for hard tubes with an outer diameter of 16 mm. This fitting has a standardized G1/4 inch connection to connect your Water cooling components. The thread is sealed with a rubber ring.The connection is made of brass and alloyed with aluminum. The surface is covered with an intricately textured pattern, which increases grip when tightening. With this fitting your hard tubes are always secure!Technical details:- Material: brass, aluminum (alloy)- Color whiteConnections:- External thread: G1/4 inch- Hard tube: 16 mm outer diameter (OD)

Replacement outer O-ring gaskets for EK fittings and angled adapters.Package contains 6 pieces of OR 12x2.These fittings are compatible with following fitting lines: EK-HDC 16mm EK-ACF 10/13mm EK-ACF 10/16mm EK-ACF 13/19mm EK-ACF 12/16mm EK-HD Adapter 12/16mm EK-Coolstream extenders EK-ACF 10/16mm

Mayhems 1.1 Meter Silicone Bending Cord 9.5mm OD for 10mm Petg and Acrylic Hard tubing Extreme temperatures -40°C to +200°C. Good electrical resistance and insulation properties.FDA approved Silicone rubber cord is the preferred Perfect for bending PETG and Acrillic Hard Tubing.Tolerance of +/- 1mmSpecification:- Colour: White- Material: Silicone (VMQ)- Cross Section Type: Circular- Hardness (Shore A): 60- Maximum Temperature (°C): 200- Minimum Temperature (°C): -40- Elongation at break (%): 590- Tensile Strength (MPa): 10.5- Compression Set (%): 20

The EK-HD PETG Inserts are EK's way of battling against potential hazards that the use of PETG tubes present. PETG tubes are extremely popular because of the ease of use and their flexibility. On the other hand, PETG tubing is prone to deformation when exposed to high temperatures (40°C and above). The deformation rate depends on the duration and maximum temperature reached. These temperatures can be reached with pump failures, water block clogging, etc. The EK-HD PETG Inserts provide a safety measure for 16mm OD / 12mm ID PETG tubes which prevents the tube wall from collapsing inside the compression fitting. The EK-HD PETG Insert is low profile and it is not visible when in use with …