Cooling Systems Accessories

EK-Quantum Torque HDC 12 fittings are EK's new minimalistic 12mm hard-tube compression fittings designed for use with solid tubing such as Acrylic and PETG. With a non-intrusive, yet striking look, and with NO added branding at all. They can be complemented by interchangeable aesthetic color rings, and are an ideal choice for anyone and a perfect match with EK-Quantum series products.EK-Quantum Torque series products received the prestigious iF Design Award. A robust and industrial aesthetic sets the Torque family apart by highlighting the precise manufacturing processes used to create them. In addition, enthusiasts can add a unique color ring to give a personal accent to the fitting line. The …

EK-Quantum Torque Micro HDC 12 - Black is a premium 12mm fitting made for solid tubing, such as acrylic, PETG, and brass. A much smaller footprint will allow tube placement in places where a regular fitting would be too large or inconvenient. It was named Micro due to an installed height of only 11.5mm, which is 23% shorter than standard Torque HDC 12 fittings. The outer diameter of the fitting is also significantly smaller than its bigger brother, with only 16mm across the fitting. The solid tube is gripped by the high-quality EPDM rubber gasket inside the Torque Micro compression ring. The fitting is made of CNC-machined brass with a satin black finish. The surface of the fitting is smooth …

EK-Quantum Torque HDC 14 fittings are EK's new minimalistic 14mm hard-tube compression fittings designed for use with solid tubing such as Acrylic and PETG. With a non-intrusive, yet striking look, and with NO added branding at all. They can be complemented by interchangeable aesthetic color rings, and are an ideal choice for anyone and a perfect match with EK-Quantum series products.EK-Quantum Torque series products received the prestigious iF Design Award. A robust and industrial aesthetic sets the Torque family apart by highlighting the precise manufacturing processes used to create them. In addition, enthusiasts can add a unique color ring to give a personal accent to the fitting line. The …

EK-Loop Connect Level Sensor TBE 60 is a coolant level sensor provides a warning when the reservoir reaches a point where it would be prudent to top it off. Due to the coolant evaporation through the tubing, it makes sure the pump never runs dry. Also, in case of a leak, it warns you of the coolant level being below its optimal value.It attaches to the tube of the EK tubular-style reservoirs with 60mm diameter and connects via a dedicated cable to the EK-Loop Connect control unit.Technical Specifications:- Connectors: 4-pin- Length: 50cm

To connect the individual components of the water cooling system, it is essential to choose the right connections and their sufficient number. Otherwise the installation quickly becomes a frustrating experience if the assembly fails due to the wrong or too few connectors and is delayed as a result.Bitspower offers a comprehensive range, which has the right solution for every requirement - whether adapter, direct hose connections, elbow or distributor.This is an adapter for connecting acrylic tubes in a water cooling circuit. The in-house Crystal Link Tubes are particularly suitable for this and can be used, for example, to connect two graphics cards and bridge the distance between the two accordingly.…

The new Eiszapfen PRO HardTube fittings from Alphacool are a further development of the well-known, previous Eiszapfen. When developing the fittings, Alphacool focused specifically on one particular problem: the deformation of PETG hard tubes at high temperature. These can deform at 60 ° C. Although such a temperature is rarely reached, it can still occur. The Eiszapfen PRO prevent this problem from the outset and keep the tubes in position. Deformation is prevented by the new nylon inserts on the inside and stabilizes the hard tubes. Furthermore, the fitting still has an O-ring and a compression seal. However, the contact area is much larger than with normal O-rings, which ensures a better …

The XSPC Professional PETG Deburing Tool kit was developed as an upgraded replacement for the older manual hand held debur tool. The best thing is they are a very similar price. Speed and accuracy are improved with our new rotary tool, and can proudly sit amongst your modding tools for future builds. Simply lock the tool in a battery drill chuck, and spin for a few seconds while feeding the PETG into the tool, for a speedy and accurate chamfer. Then use the provided sand paper to smooth off the end before putting the tube to use in your new build.Details- Fast and efficient way of deburing your PETG tubing- Also effective on Stainless Steel, Mild Steel, Copper, Brass, Aluminium, Fiberglass and …

The EK-RES X3 TOP WHITE is an replacement white top end cap for EK-RES X3 series reservoirs and other RES X3 based parts.EK-RES X3 TOP WHITE is made of quality machined POM Acetal material.Contents:- EK-RES X3 TOP WHITE- including sealing gasket (o-ring / OR 52x2.5)Compatibility:This spare part is compatible with the following EK reservoirs:- EK-RES X3 110- EK-RES X3 150- EK-RES X3 250- EK-RES X3 400- EK-DDC X-RES CSQ- EK-D5 X-RES CSQPlease note:- G 1/4 plug to close the port is no enclosed.- Allen key 6mm, required for tightening of G1/4 plugs, is not enclosed. It is however being enclosed within each delivery of the EK-RES X3 series reservoirs.Made in Slovenia - EU!

All requirements that are placed on a connection are fulfilled here: Highflow, form, processing and colouring. Uncompromising development and production have made the Eiszapfen what they are. In brilliant chrome and matte deep black, there are two versions that fit perfectly into any system. With special processes, the coatings are firmly bonded to ensure the longevity of the intense colours. Each port now has the Alphacool logo which makes it unmistakable in addition to its special shape! Due to the beveled edges of the union nut, the O-ring is very firmly pressed against the hard tube, making it even stronger than in its predecessors. This ensures more safety during transport. Design: straight …

With this Barrow tube cutter you can easily cut soft and hard tubes to fit. The hose cutter is suitable for straight and clean cuts without compromise. This tool makes it easier for you to build your new water-cooled system and brings you a step closer to your perfect gaming PC.Technical details:- Color white- Material: plastic (handle), steel (blade)- Compatibility: PVC and PETG tubes (soft/hard tubes)

The Bitspower None Chamfer PETG Link Tube is a solid tube and is used to connect multiple VGA water cooling blocks or other watercooling components.The 1000 mm long tube having an inner diameter of 11 mm, while the outer diameter is 14 mm. It consists of PETG (polyethylene terephthalate), a plastic material, as it is also used for the known PET bottles. It has a particularly high stability, high resistance to breakage, which greatly facilitates the processing of custom water cooling.Features:- Only Compaible With Bitspower Fitting EML Series.- Pure PETG Material.- Durable And Strength Performance.- RoHS Compliant.

To connect the individual components of the water cooling system, it is essential to choose the right connections and their sufficient number. Otherwise the installation quickly becomes a frustrating experience if the assembly fails due to the wrong or too few connectors and is delayed as a result.Bitspower offers a comprehensive range, which has the right solution for every requirement - whether adapter, direct hose connections, elbow or distributor.This is an adapter for connecting acrylic tubes in a water cooling circuit. The in-house Crystal Link Tubes are particularly suitable for this and can be used, for example, to connect two graphics cards and bridge the distance between the two accordingly.…

EK-Quantum Torque HDC 12 fittings are EK's new minimalistic 12mm hard-tube compression fittings designed for use with solid tubing such as Acrylic and PETG. With a non-intrusive, yet striking look, and with NO added branding at all. They can be complemented by interchangeable aesthetic color rings, and are an ideal choice for anyone and a perfect match with EK-Quantum series products. The locking ring prevents solid tube to be pulled out of the fitting by compressing the rubber gasket underneath the ring. The grooves on the outside allow for easier hand tightening. The compression ring has cutouts in EK Quantum signature shape allowing for the colored aesthetic ring to be shown. The colored …

Finding the right place in the housing for the expansion tank (AGB) is complicated. Barrow offers you the option of using this bracket to attach a pump or reservoir directly to a 140 fan slot on a radiator. The bracket is mounted on the fan, but thanks to its trapezoidal shape it leaves enough space. For the AGB or the pump there are holes with a distance of 50 mm on the top.Technical details:- Dimensions: 137,1 x 23 x 136 mm (B x H x T)- Color: Black- Material: Stahl- Hole spacing (fan slot): 125 mm- Hole spacing (pump, AGB): 50 mmCompatibility:- 140mm fans- 140mm wide radiators

The EK-RES X3 TOP is an replacement top end cap for EK-RES X3 series reservoirs and other RES X3 based parts.EK-RES X3 TOP is made of quality machined POM Acetal material.Contents:- EK-RES X3 TOP- including sealing gasket (o-ring / OR 52x2.5)Compatibility:This spare part is compatible with the following EK reservoirs:- EK-RES X3 110- EK-RES X3 150- EK-RES X3 250- EK-RES X3 400- EK-DDC X-RES CSQ- EK-D5 X-RES CSQMade in Slovenia - EU!Please note:- G 1/4 plug to close the port is no enclosed.- Allen key 6mm, required for tightening of G1/4 plugs, is not enclosed. It is however being enclosed within each delivery of the EK-RES X3 series reservoirs.

With this acrylic hard tube from Barrow , your water cooling will be a complete success. The tube is completely transparent, showing off the coolant inside.The 1000 mm long tube has an outer diameter of 16 mm and an inner diameter of 12 mm and can be easily cut and bent with the right tool.Technical details:- Material: Acryl (PMMA)- Colour: Clear- Outer Diameter: 16mm- Inner Diameter: 12mm- Length: 1000 mm- Compatibility: Connections with 16 mm outside diameter

With this acrylic hard tube from Barrow , your water cooling will be a complete success. The tube is completely transparent, showing off the coolant inside.The 1000 mm long tube has an outer diameter of 14 mm and an inner diameter of 10 mm and can be easily cut and bent with the right tool.Technical details:- Material: Acryl (PMMA)- Colour: Clear- Outer Diameter: 14mm- Inner Diameter: 10mm- Length: 1000 mm- Compatibility: Connections with 14 mm outside diameter

EK-Quantum Torque Micro HDC 12 - Black is a premium 12mm fitting made for solid tubing, such as acrylic, PETG, and brass. A much smaller footprint will allow tube placement in places where a regular fitting would be too large or inconvenient. It was named Micro due to an installed height of only 11.5mm, which is 23% shorter than standard Torque HDC 12 fittings. The outer diameter of the fitting is also significantly smaller than its bigger brother, with only 16mm across the fitting. The solid tube is gripped by the high-quality EPDM rubber gasket inside the Torque Micro compression ring. The fitting is made of CNC-machined brass with a satin black finish. The surface of the fitting is smooth …

Features:- True Hi-Flow Design.- Hi-Quality Brass Material.- High Durability Nickel Finished in Silver Shining Color.- Design for Multi-Link Extension Application Via Acrylic Tube OD 14MM.- RoHS Compliant.Specification:- Thread : G1/4"- Thread Length : 5MM

This double pack consists of two hardline fittings for hard tubes from Bitspower Touchaqua . The silver connectors serve as connectors between an acrylic tube with a 12 mm outer diameter and a G1 / 4 inch connector . The fittings and the union nuts are made of brass, high-quality rubber rings provide the necessary sealing. Technical details: - Material: brass - Colour: Silver (Glorious Silver) Connections: - 1x 12 mm hard tube - 1x G1 / 4 external thread Contents: - 2x Bitspower Touchaqua connection G1 / 4 inch AG on 12mm AD hardtube in silver

EK-Quantum Torque HDC 12 fittings are EK's new minimalistic 12mm hard-tube compression fittings designed for use with solid tubing such as Acrylic and PETG. With a non-intrusive, yet striking look, and with NO added branding at all. They can be complemented by interchangeable aesthetic color rings, and are an ideal choice for anyone and a perfect match with EK-Quantum series products.EK-Quantum Torque series products received the prestigious iF Design Award. A robust and industrial aesthetic sets the Torque family apart by highlighting the precise manufacturing processes used to create them. In addition, enthusiasts can add a unique color ring to give a personal accent to the fitting line. The …

EK-Quantum Torque HDC 14 fittings are EK's new minimalistic 12mm hard-tube compression fittings designed for use with solid tubing such as Acrylic and PETG. With a non-intrusive, yet striking look, and with NO added branding at all. They can be complemented by interchangeable aesthetic color rings, and are an ideal choice for anyone and a perfect match with EK-Quantum series products. The locking ring prevents solid tube to be pulled out of the fitting by compressing the rubber gasket underneath the ring. The grooves on the outside allow for easier hand tightening. The compression ring has cutouts in EK Quantum signature shape allowing for the colored aesthetic ring to be shown. The colored …

The Bitspower None Chamfer PETG Link Tube is a solid tube and is used to connect multiple VGA water cooling blocks or other watercooling components.The 1000 mm long tube having an inner diameter of 12 mm, while the outer diameter is 16 mm. It consists of PETG (polyethylene terephthalate), a plastic material, as it is also used for the known PET bottles. It has a particularly high stability, high resistance to breakage, which greatly facilitates the processing of custom water cooling.Features:- Only Compaible With Bitspower Fitting EML Series.- Pure PETG Material.- Durable And Strength Performance.- RoHS Compliant.

EK-DDC Anti-Vibration Mounting is a simple, yet effective mounting upgrade kit for any EK-DDC type water pump. This vibration dampening rubber mounting system effectively de-couples the water pump from the rest of the computer chassis.Fits any EK-DDC X-RES as well as X-TOP product and can be easily used to fixate the pump assembly to any flat surface using 50x50mm square mounting hole pattern.Contents:- Mounting mechanism with vibration decouplers- Allen key 2mmPLEASE NOTE:- EK does not guarantee compatibility with other brands DDC water pumps or 3rd party pump tops (volutes). Only EK-DDC family products are supported!- Vibration damping mounting cannot be used with original Laing DDC pump top!Made …